相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。CFD Modeling and Analysis of Particle Size Reduction and Its Effect on Blast Furnace Ironmaking
Lulu Jiao et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2021)
Influence of particle packed pattern on the transient granular flow in a wedge-shaped hopper
Zhehan Liao et al.
ADVANCED POWDER TECHNOLOGY (2020)
DEM study of the porosity distribution of pellet sandpile formed by ternary size particles
Han Wei et al.
POWDER TECHNOLOGY (2020)
Measurement and simulation validation of DEM parameters of pellet, sinter and coke particles
Han Wei et al.
POWDER TECHNOLOGY (2020)
Validation of the Burden Distribution of the 1/3-Scale of a Blast Furnace Simulated by the Discrete Element Method
Hiroshi Mio et al.
PROCESSES (2020)
Effect of the cross-section shape of rotating chute on particle flow and burden distribution during the charging process of bell-less top blast furnace with two parallel hoppers
Wenxuan Xu et al.
IRONMAKING & STEELMAKING (2019)
Effect of cross-section shape of rotating chute on particle movement and distribution at the throat of a bell-less top blast furnace
Mingyin Kou et al.
PARTICUOLOGY (2019)
Numerical and experimental studies of the effect of iron ore particle shape on repose angle and porosity of a heap
Han Wei et al.
POWDER TECHNOLOGY (2019)
Investigation on the uneven distribution of different types of ores in the hopper and stock surface during the charging process of blast furnace based on discrete element method
Wenxuan Xu et al.
METALLURGICAL RESEARCH & TECHNOLOGY (2019)
A numerical investigation assessing the symmetry of burden charging in a blast furnace using different chute designs
M. A. J. Holmes et al.
IRONMAKING & STEELMAKING (2018)
Analysis of abrasive damage of iron ore pellets
A. Hossein Madadi Najafabadi et al.
POWDER TECHNOLOGY (2018)
Quantitative comparison of binary particle mass and size segregation between serial and parallel type hoppers of blast furnace bell-less top charging system
Yang Xu et al.
POWDER TECHNOLOGY (2018)
Numerical Investigation of Coke Collapse and Size Segregation in the Bell-less Top Blast Furnace
Mingyin Kou et al.
ISIJ INTERNATIONAL (2018)
Development of Blast Furnace Burden Distribution Process Modeling and Control
Yongliang Yang et al.
ISIJ INTERNATIONAL (2017)
Numerical and experimental studies of corn particle properties on the forming of pile
Han Wei et al.
POWDER TECHNOLOGY (2017)
CFD-DEM simulation of raceway formation in an ironmaking blast furnace
Zhen Miao et al.
POWDER TECHNOLOGY (2017)
DEM simulation of particle flow in a parallel-hopper bell-less charging apparatus for blast furnace
Jiayong Qiu et al.
POWDER TECHNOLOGY (2017)
Transient local segregation grids of binary size particles discharged from a wedge-shaped hopper
Jian Xu et al.
POWDER TECHNOLOGY (2017)
The angle of repose and size segregation of iron ore granules: DEM analysis and experimental investigation
Chengzhi Li et al.
POWDER TECHNOLOGY (2017)
Discrete element simulation of charging and mixed layer formation in the ironmaking blast furnace
Tamoghna Mitra et al.
COMPUTATIONAL PARTICLE MECHANICS (2016)
A model for burden distribution and gas flow distribution of bell-less top blast furnace with parallel hoppers
Lin Shi et al.
APPLIED MATHEMATICAL MODELLING (2016)
Mathematical model for burden distribution in blast furnace
P. Y. Shi et al.
IRONMAKING & STEELMAKING (2016)
Investigation of Coke Collapse in the Blast Furnace Using Mathematical Modeling and Small Scale Experiments
Tamoghna Mitra et al.
ISIJ INTERNATIONAL (2016)
Evaluation of Burden Descent Model for Burden Distribution in Blast Furnace
Ping Zhou et al.
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2016)
Mathematical modeling of blast furnace burden distribution with non-uniform descending speed
Dong Fu et al.
APPLIED MATHEMATICAL MODELLING (2015)
Evaluation of stock profile models for burden distribution in blast furnace
P. Y. Shi et al.
IRONMAKING & STEELMAKING (2015)
A New Approach for Studying Softening and Melting Behavior of Particles in a Blast Furnace Cohesive Zone
Wenjing Yang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2015)
Prediction of Heap Shape in Blast Furnace Burden Distribution
Samik Nag et al.
ISIJ INTERNATIONAL (2014)
Model for Fast Evaluation of Charging Programs in the Blast Furnace
Tamoghna Mitra et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2014)
Segregation behavior of particles in a top hopper of a blast furnace
Yaowei Yu et al.
POWDER TECHNOLOGY (2014)
DEM simulation of particle size segregation behavior during charging into and discharging from a Paul-Wurth type hopper
Shengli Wu et al.
CHEMICAL ENGINEERING SCIENCE (2013)
Mathematical model of burden distribution for the bell-less top of a blast furnace
Zhao-jie Teng et al.
INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2013)
Contact parameter estimation for DEM simulation of iron ore pellet handling
Gabriel K. P. Barrios et al.
POWDER TECHNOLOGY (2013)
Flow of Pellet and Coke Particles in and from a Fixed Chute
Yaowei Yu et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2012)
DEM-CFD Model Considering Softening Behavior of Ore Particles in Cohesive Zone and Gas Flow Analysis at Low Coke Rate in Blast Furnace
Hiroyuki Kurosawa et al.
ISIJ INTERNATIONAL (2012)
Effect of DEM Parameters on the Simulated Inter-particle Percolation of Pellets into Coke during Burden Descent in the Blast Furnace
Yaowei Yu et al.
ISIJ INTERNATIONAL (2012)
Development of particle flow simulator in charging process of blast furnace by discrete element method
Hiroshi Mio et al.
MINERALS ENGINEERING (2012)
Discrete element method simulation of properties of a 3D conical hopper with mono-sized spheres
Yaowei Yu et al.
ADVANCED POWDER TECHNOLOGY (2011)
Circumferential burden distribution behaviors at bell-less top blast furnace with parallel type hoppers
Jian Xu et al.
APPLIED MATHEMATICAL MODELLING (2011)
Analysis of rapid flow of particles down and from an inclined chute using small scale experiments and discrete element simulation
Y. W. Yu et al.
IRONMAKING & STEELMAKING (2011)
Inter-particle Percolation Segregation during Burden Descent in the Blast Furnace
Yaowei Yu et al.
ISIJ INTERNATIONAL (2011)
Development of the Burden Distribution and Gas Flow Model in the Blast Furnace Shaft
Jong-In Park et al.
ISIJ INTERNATIONAL (2011)
Influence of Profile of Blast Furnace on Motion and Stress of Burden by 3D-DEM
Jian-liang ZHANG et al.
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2011)
Mathematical modeling of the burden distribution in the blast furnace shaft
Jong-In Park et al.
METALS AND MATERIALS INTERNATIONAL (2011)
Discrete element method modeling of non-spherical granular flow in rectangular hopper
He Tao et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2010)
Experimental and DEM study of segregation of ternary size particles in a blast furnace top bunker model
Yaowei Yu et al.
CHEMICAL ENGINEERING SCIENCE (2010)
Analysis of Traveling Behavior of Nut Coke Particles in Bell-type Charging Process of Blast Furnace by Using Discrete Element Method
Hiroshi Mio et al.
ISIJ INTERNATIONAL (2010)
Multi-scale study of particle flow in silos
Jintao Wu et al.
ADVANCED POWDER TECHNOLOGY (2009)
Theoretical calculation and validation of burden trajectory in bell-less top blast furnace
Y. W. Yu et al.
IRONMAKING & STEELMAKING (2009)
Development of material trajectory simulation model for blast furnace compact bell-less top
S. Nag et al.
IRONMAKING & STEELMAKING (2009)
Particle Size Segregation in the Failing Stream of Burden Materials
Mriganshu Guha et al.
ISIJ INTERNATIONAL (2009)
Effect of Chute Angle on Charging Behavior of Sintered Ore Particles at Bell-less Type Charging System of Blast Furnace by Discrete Element Method
Hiroshi Mio et al.
ISIJ INTERNATIONAL (2009)
Experimental and numerical investigations of gouge formation related to blast furnace burden distribution
C. K. Ho et al.
MINERALS ENGINEERING (2009)
Predicting the flow mode from hoppers using the discrete element method
William R. Ketterhagen et al.
POWDER TECHNOLOGY (2009)
Mass distribution in the failing stream of burden materials
Samik Nag et al.
ISIJ INTERNATIONAL (2008)
Validation of Particle Size Segregation of Sintered Ore during Flowing through Laboratory-scale Chute by Discrete Element Method
Hiroshi Mio et al.
ISIJ INTERNATIONAL (2008)
Modeling granular segregation in flow from quasi-three-dimensional, wedge-shaped hoppers
William R. Ketterhagen et al.
POWDER TECHNOLOGY (2008)
Quantification of the mechanisms governing the packing of iron ore fines
J. Q. Xu et al.
POWDER TECHNOLOGY (2006)
Three-dimensional discrete element simulations in hoppers and silos
TJ Goda et al.
POWDER TECHNOLOGY (2005)
Steady-state granular flow in a three-dimensional cylindrical hopper with flat bottom: microscopic analysis
HP Zhu et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2004)
Stabilizing burden trajectory into blast furnace top under high ore to coke ratio operation
Y Matsui et al.
ISIJ INTERNATIONAL (2003)
DEM modelling of industrial granular flows: 3D case studies and the effect of particle shape on hopper discharge
PW Cleary et al.
APPLIED MATHEMATICAL MODELLING (2002)
Mathematical model for predictive control of the bell-less top charging system of a blast furnace
VR Radhakrishnan et al.
JOURNAL OF PROCESS CONTROL (2001)
Burden distribution analysis by digital image processing in a scale model of a blast furnace shaft
J Jimenez et al.
ISIJ INTERNATIONAL (2000)
分享论文
