相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Additive manufacturing of biodegradable iron-based particle reinforced polylactic acid composite scaffolds for tissue engineering
Dayue Jiang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)
Optimization and Fabrication of Customized Scaffold Using Additive Manufacturing to Match the Property of Human Bone
S. Rashia Begum et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2021)
Morphological and mechanical characterization of 3D printed PLA scaffolds with controlled porosity for trabecular bone tissue replacement
R. Baptista et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)
3D printed bone tissue regenerative PLA/HA scaffolds with comprehensive performance optimizations
Boqing Zhang et al.
MATERIALS & DESIGN (2021)
Calcium phosphate-PLA scaffolds fabricated by fused deposition modeling technique for bone tissue applications: Fabrication, characterization and simulation
S. Sahmani et al.
CERAMICS INTERNATIONAL (2020)
Comparison between calcium carbonate and β-tricalcium phosphate as additives of 3D printed scaffolds with polylactic acid matrix
Ricardo Donate et al.
JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2020)
3D-printed PLA/HA composite structures as synthetic trabecular bone: A feasibility study using fused deposition modeling
Dan Wu et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)
3D printed multi-scale scaffolds with ultrafine fibers for providing excellent biocompatibility
Qing Gao et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)
Morpho-Structural, Thermal and Mechanical Properties of PLA/PHB/Cellulose Biodegradable Nanocomposites Obtained by Compression Molding, Extrusion, and 3D Printing
Adriana Nicoleta Frone et al.
NANOMATERIALS (2020)
Assessment of the morphology and dimensional accuracy of 3D printed PLA and PLA/HAp scaffolds
Ieva Gendviliene et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)
Rapid development of dual porous poly(lactic acid) foam using fused deposition modeling (FDM) 3D printing for medical scaffold application
Won Jun Choi et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)
Investigations on the Mechanical Properties of Glass Fiber/Sisal Fiber/Chitosan Reinforced Hybrid Polymer Sandwich Composite Scaffolds for Bone Fracture Fixation Applications
Soundhar Arumugam et al.
POLYMERS (2020)
3D printed biodegradable composites: An insight into mechanical properties of PLA/chitosan scaffold
Sunpreet Singh et al.
POLYMER TESTING (2020)
Fused deposition modeling-based additive manufacturing (3D printing): techniques for polymer material systems
S. C. Daminabo et al.
MATERIALS TODAY CHEMISTRY (2020)
Highly loaded hydroxyapatite microsphere/PLA porous scaffolds obtained by fused deposition modelling
Carola Esposito Corcione et al.
CERAMICS INTERNATIONAL (2019)
3D printing of bone scaffolds with hybrid biomaterials
Bankole I. Oladapo et al.
COMPOSITES PART B-ENGINEERING (2019)
3D-printed poly(lactic acid) scaffolds for trabecular bone repair and regeneration: scaffold and native bone characterization
Zeynep Busra Velioglu et al.
CONNECTIVE TISSUE RESEARCH (2019)
Additive manufacturing: Challenges, trends, and applications
Osama Abdulhameed et al.
ADVANCES IN MECHANICAL ENGINEERING (2019)
Tuning the biomimetic behavior of scaffolds for regenerative medicine through surface modifications
Nathan R. Richbourg et al.
JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2019)
Carbon Fiber Reinforced PEEK Composites Based on 3D-Printing Technology for Orthopedic and Dental Applications
Xingting Han et al.
JOURNAL OF CLINICAL MEDICINE (2019)
3D-printed ternary SiO2-CaO-P2O5 bioglass-ceramic scaffolds with tunable compositions and properties for bone regeneration
Lei Li et al.
CERAMICS INTERNATIONAL (2019)
Applications of 3D printing on craniofacial bone repair: A systematic review
Michael Maroulakos et al.
JOURNAL OF DENTISTRY (2019)
Eggshell particle-reinforced hydrogels for bone tissue engineering: an orthogonal approach
Xinchen Wu et al.
BIOMATERIALS SCIENCE (2019)
Natural bioceramics: our experience with changing perspectives in the reconstruction of maxillofacial skeleton
Vivekanand Sabanna Kattimani et al.
JOURNAL OF THE KOREAN ASSOCIATION OF ORAL AND MAXILLOFACIAL SURGEONS (2019)
Surface Modification of 3D Printed PLA Objects by Fused Deposition Modeling: A Review
Eda Hazal Baran et al.
COLLOIDS AND INTERFACES (2019)
Fabrication of 3D printed objects with controlled surface chemistry and topography
Nelson Vargas-Alfredo et al.
EUROPEAN POLYMER JOURNAL (2018)
Systematic characterization of 3D-printed PCL/β-TCP scaffolds for biomedical devices and bone tissue engineering: Influence of composition and porosity
Amaud Bruyas et al.
JOURNAL OF MATERIALS RESEARCH (2018)
3D printed Polycaprolactone scaffolds with dual macro-microporosity for applications in local delivery of antibiotics
Luke E. Visscher et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2018)
A TPMS-based method for modeling porous scaffolds for bionic bone tissue engineering
Jianping Shi et al.
SCIENTIFIC REPORTS (2018)
Study of wettability and cell viability of H implanted stainless steel
Muhammad Ahsan Shafique et al.
MATERIALS RESEARCH EXPRESS (2018)
Layered gelatin/PLLA scaffolds fabricated by electrospinning and 3D printing- for nasal cartilages and subchondral bone reconstruction
Izabella Rajzer et al.
MATERIALS & DESIGN (2018)
Development of three-dimensional printing polymer-ceramic scaffolds with enhanced compressive properties and tuneable resorption
Zuoxin Zhou et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2018)
3D-Printing of Microfibrous Porous Scaffolds Based on Hybrid Approaches for Bone Tissue Engineering
Ranjith Kumar Kankala et al.
POLYMERS (2018)
3D Powder Printed Bioglass and β-Tricalcium Phosphate Bone Scaffolds
Michael Seidenstuecker et al.
MATERIALS (2018)
3D printing of hydroxyapatite polymer-based composites for bone tissue engineering
Carola Esposito Corcione et al.
JOURNAL OF POLYMER ENGINEERING (2017)
Synthesis and Characterization of Cordierite, Mullite and Cordierite-Mullite Ceramic Materials using Coal Fly Ash as Raw Material
J. Lopez-Cuevas et al.
MRS ADVANCES (2017)
Topology Optimization to reduce the stress shielding effect for orthopedic applications
Abdulsalam A. Al-Tamimi et al.
3RD CIRP CONFERENCE ON BIOMANUFACTURING (2017)
Ten challenges in 3D printing
William Oropallo et al.
ENGINEERING WITH COMPUTERS (2016)
A method to design biomimetic scaffolds for bone tissue engineering based on Voronoi lattices
M. Fantini et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2016)
Bioinspired engineering of honeycomb structure - Using nature to inspire human innovation
Qiancheng Zhang et al.
PROGRESS IN MATERIALS SCIENCE (2015)
Melt Electrospinning and Its Technologization in Tissue Engineering
M. Lourdes Muerza-Cascante et al.
TISSUE ENGINEERING PART B-REVIEWS (2015)
Production and characterisation of PCL/ES Scaffolds for Bone Tissue Engineering
Sara I. Biscaia et al.
MATERIALS TODAY-PROCEEDINGS (2015)
Tissue engineering of electrically responsive tissues using polyaniline based polymers: A review
Taimoor H. Qazi et al.
BIOMATERIALS (2014)
Fabrication and properties of porous scaffold of magnesium phosphate/polycaprolactone biocomposite for bone tissue engineering
Fan Wu et al.
APPLIED SURFACE SCIENCE (2012)
Influence of the binder on the mechanical strength of compacts prepared by modified wet compression method
Amal Tita et al.
POWDER TECHNOLOGY (2012)
Direct Writing By Way of Melt Electrospinning
Toby D. Brown et al.
ADVANCED MATERIALS (2011)
Porosity and Pore Size Regulate the Degradation Product Profile of Polylactide
Karin Odelius et al.
BIOMACROMOLECULES (2011)
Preparation and characterization of a novel bone graft composite containing bone ash and egg shell powder
Gunasekaran Krithiga et al.
BULLETIN OF MATERIALS SCIENCE (2011)
Bioresorbability, porosity and mechanical strength of bone substitutes: What is optimal for bone regeneration?
Gerjon Hannink et al.
INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED (2011)
Fracture Loads of All-Ceramic Crowns under Wet and Dry Fatigue Conditions
Gilberto A. Borges et al.
JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY (2009)
Calcium Phosphate-Based Osteoinductive Materials
Racquel Zapanta LeGeros
CHEMICAL REVIEWS (2008)
Biodegradable honeycomb collagen scaffold for dermal tissue engineering
Joseph George et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2008)
Rapid prototyping of ceramic lattices for hard tissue scaffolds
Shoufeng Yang et al.
MATERIALS & DESIGN (2008)
In vitro degradation of novel bioactive polycaprolactone-20% tricalcium phosphate composite scaffolds for bone engineering
Y. Lei et al.
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2007)
How useful is SBF in predicting in vivo bone bioactivity?
T Kokubo et al.
BIOMATERIALS (2006)
Bioceramic bone graft substitutes: Influence of porosity and chemistry
KA Hing
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2005)
Porosity of 3D biomaterial scaffolds and osteogenesis
V Karageorgiou et al.
BIOMATERIALS (2005)
Fused deposition modeling of novel scaffold architectures for tissue engineering applications
I Zein et al.
BIOMATERIALS (2002)
Comparison of pericranium and eggshell as space fillers used in combination with guided bone regeneration: An experimental study
L Dupoirieux et al.
JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2000)
分享论文
