相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Modulation of work function of ITO by self-assembled monolayer and its effect on device characteristics of inverted perovskite solar cells
Neha Singh et al.
ORGANIC ELECTRONICS (2021)
Chiral-induced spin selectivity enables a room-temperature spin light-emitting diode
Young-Hoon Kim et al.
SCIENCE (2021)
Electronic structure engineering in organic thermoelectric materials
Xiaojuan Dai et al.
JOURNAL OF ENERGY CHEMISTRY (2021)
Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) Modified by Water for Efficient Inverted Perovskite Solar Cells
Jian Xiong et al.
PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE (2021)
Achieving a Record Open-Circuit Voltage for Organic/Si Hybrid Solar Cells by Improving Junction Quality
Zhangbo Lu et al.
SOLAR RRL (2021)
Zwitterions: promising interfacial/doping materials for organic/perovskite solar cells
Qiaoyun Chen et al.
NEW JOURNAL OF CHEMISTRY (2021)
Space Charge Regions at Organic p-i-Homointerfaces from Advanced Modeling of In Situ-Prepared Interfaces Analyzed by Photoelectron Spectroscopy
Markus Frericks et al.
ACS APPLIED ELECTRONIC MATERIALS (2021)
Direct Observation of Conductive Polymer Induced Inversion Layer in n-Si and Correlation to Solar Cell Performance
Rongbin Wang et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
Room-Temperature-Formed PEDOT:PSS Hydrogels Enable Injectable, Soft, and Healable Organic Bioelectronics
Shiming Zhang et al.
ADVANCED MATERIALS (2020)
Progress in understanding structure and transport properties of PEDOT-based materials: A critical review
Magatte N. Gueye et al.
PROGRESS IN MATERIALS SCIENCE (2020)
Rational Interface Engineering for Efficient Flexible Perovskite Light-Emitting Diodes
Yang Shen et al.
ACS NANO (2020)
Research Progress on Polymer Solar Cells Based on PEDOT:PSS Electrodes
Lin Hu et al.
POLYMERS (2020)
Ultrathin PEDOT:PSS Enables Colorful and Efficient Perovskite Light-Emitting Diodes
Jianxun Lu et al.
ADVANCED SCIENCE (2020)
Recent Progress of Inverted Perovskite Solar Cells with a Modified PEDOT:PSS Hole Transport Layer
Wenbin Han et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Recent Advances of Synthesis, Properties, Film Fabrication Methods, Modifications of Poly(3,4-ethylenedioxythiophene), and Applications in Solution-Processed Photovoltaics
Youyu Jiang et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
Microscopic Understanding of the Granular Structure and the Swelling of PEDOT:PSS
Mohsen Modarresi et al.
MACROMOLECULES (2020)
Conductive Polymer Work Function Changes due to Residual Water: Impact of Temperature-Dependent Dielectric Constant
Ahmed E. Mansour et al.
ADVANCED ELECTRONIC MATERIALS (2020)
The Impact of Dipolar Layers on the Electronic Properties of Organic/Inorganic Hybrid Interfaces
Egbert Zojer et al.
ADVANCED MATERIALS INTERFACES (2019)
Interfaces in organic electronics
Mats Fahlman et al.
NATURE REVIEWS MATERIALS (2019)
Dynamically Switching the Electronic and Electrostatic Properties of Indium-Tin Oxide Electrodes with Photochromic Monolayers: Toward Photoswitchable Optoelectronic Devices
Qiankun Wang et al.
ACS APPLIED NANO MATERIALS (2019)
Achieving a Record Fill Factor for Silicon-Organic Hybrid Heterojunction Solar Cells by Using a Full-Area Metal Polymer Nanocomposite Top Electrode
Juye Zhu et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
Self-assembled monolayer-modified ITO for efficient organic light-emitting diodes: The impact of different self-assemble monolayers on interfacial and electroluminescent properties
Hao Zheng et al.
ORGANIC ELECTRONICS (2018)
Bright inverted quantum-dot light-emitting diodes by all-solution processing
Manuel A. Triana et al.
JOURNAL OF MATERIALS CHEMISTRY C (2018)
Enhanced Device Efficiency and Long-Term Stability via Boronic Acid-Based Self-Assembled Monolayer Modification of Indium Tin Oxide in a Planar Perovskite Solar Cell
Duygu Akin Kara et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Improved Performance and Stability of All-Inorganic Perovskite Light-Emitting Diodes by Antisolvent Vapor Treatment
Chen Wu et al.
ADVANCED FUNCTIONAL MATERIALS (2017)
Unveiling the Hybrid n-Si/PEDOT:PSS Interface
Sara Jaeckle et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Pentacene on Au(111), Ag(111) and Cu(111): From physisorption to chemisorption
Meng-Chao Lu et al.
JOURNAL OF PHYSICS-CONDENSED MATTER (2016)
Structural control of mixed ionic and electronic transport in conducting polymers
Jonathan Rivnay et al.
NATURE COMMUNICATIONS (2016)
Vertical phase separation of PSS in organic photovoltaics with a nickel oxide doped PEDOT: PSS interlayer
Anil Kanwat et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2015)
Surface Modification of ZnO(0001)-Zn with Phosphonate-Based Self-Assembled Monolayers: Binding Modes, Orientation, and Work Function
Melanie Timpel et al.
CHEMISTRY OF MATERIALS (2014)
Organic semiconductor density of states controls the energy level alignment at electrode interfaces
Martin Oehzelt et al.
NATURE COMMUNICATIONS (2014)
n-Si-Organic Inversion Layer Interfaces: A Low Temperature Deposition Method for Forming a p-n Homojunction in n-Si
Ann S. Erickson et al.
ADVANCED ENERGY MATERIALS (2014)
Characteristics of ITO films with oxygen plasma treatment for thin film solar cell applications
Yong Seob Park et al.
MATERIALS RESEARCH BULLETIN (2013)
Enhanced stability in polymer solar cells by controlling the electrode work function via modification of indium tin oxide
Soo Won Heo et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2013)
Significant Vertical Phase Separation in Solvent-Vapor-Annealed Poly(3,4-ethylenedioxythiophene):Poly(styrene sulfonate) Composite Films Leading to Better Conductivity and Work Function for High-Performance Indium Tin Oxide-Free Optoelectronics
Jun-Seok Yeo et al.
ACS APPLIED MATERIALS & INTERFACES (2012)
Effective oxygen plasma treatment on indium tin oxide electrode to improve organic solar cell efficiency
Fu-Ching Tang et al.
PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE (2012)
On the mechanism of conductivity enhancement and work function control in PEDOT:PSS film through UV-light treatment
Abderrafia Moujoud et al.
PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE (2010)
Influence of indium tin oxide treatment using UV-ozone and argon plasma on the photovoltaic parameters of devices based on organic discotic materials
P Destruel et al.
POLYMER INTERNATIONAL (2006)
Work function independent hole-injection barriers between pentacene and conducting polymers
N Koch et al.
ADVANCED MATERIALS (2005)
Electrochemical adjustment of the work function of a conducting polymer
A Petr et al.
CHEMICAL PHYSICS LETTERS (2004)
Conjugated organic molecules on metal versus polymer electrodes: Demonstration of a key energy level alignment mechanism
N Koch et al.
APPLIED PHYSICS LETTERS (2003)
Photoelectron spectroscopy of thin films of PEDOT-PSS conjugated polymer blend: a mini-review and some new results
G Greczynski et al.
JOURNAL OF ELECTRON SPECTROSCOPY AND RELATED PHENOMENA (2001)
Estimation of inelastic mean free paths for polymers and other organic materials: use of quantitative structure-property relationships
PJ Cumpson
SURFACE AND INTERFACE ANALYSIS (2001)
分享论文
