4.5 Article

Recent progress in the assessment of irradiation effects for in-vessel fusion materials: tungsten and copper alloys

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Materials Science, Multidisciplinary

Mechanical properties of tungsten: Recent research on modified tungsten materials in Japan

Shuhei Nogami et al.

Summary: This paper discusses the drawbacks of tungsten as a plasma facing material in fusion reactors and the efforts to improve its mechanical properties through collaborative research and development. Methods such as grain refining, K-doping, dispersion strengthening, and alloying with Re are explored to enhance the performance of tungsten materials. However, there are concerns regarding the intrinsic issues of materials alloyed with Re under high dose neutron irradiation.

JOURNAL OF NUCLEAR MATERIALS (2021)

Article Materials Science, Multidisciplinary

Neutron irradiation hardening across ITER diverter tungsten armor

D. Terentyev et al.

Summary: In this study, neutron irradiation and subsequent hardness measurements were performed on tungsten grades at temperatures reaching up to 1200 degrees C. The results showed that even at one third of the melting point, neutron exposure can increase hardness by 40% to 70%, depending on the grade. Transmission electron microscopy analysis revealed that the hardening at 1200 degrees C is mainly attributed to the presence of dislocation loops and a high density of voids.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2021)

Article Materials Science, Multidisciplinary

Fracture-mechanical properties of neutron irradiated ITER specification tungsten

E. Gaganidze et al.

Summary: This study investigates the influence of neutron irradiation on the fracture mechanical properties of ITER specification-conform tungsten materials, revealing severe material embrittlement at 800 degrees C. The transition temperature shift induced by the irradiation is evaluated to be 600-625 degrees C.

JOURNAL OF NUCLEAR MATERIALS (2021)

Article Multidisciplinary Sciences

New insights into microstructure of neutron-irradiated tungsten

M. Duerrschnabel et al.

Summary: The development of appropriate materials for fusion reactors that can sustain high neutron fluence at elevated temperatures remains a challenge. Tungsten, with its favorable properties such as high melting point and sputtering resistivity, is a promising candidate material for plasma-facing components. After neutron irradiation, tungsten samples showed various radiation-induced defects including voids, dislocation loops, and W-Re-Os containing precipitates. The study also revealed the crystallographic orientation relationship of the precipitates to the W-matrix.

SCIENTIFIC REPORTS (2021)

Article Materials Science, Multidisciplinary

Neutron irradiation tolerance of potassium-doped and rhenium-alloyed tungsten

Shuhei Nogami et al.

Summary: Tungsten-based materials with potassium doping and alloying by rhenium have been developed in Japan to improve thermo-mechanical properties and tolerance to neutron-irradiation effects over the past decade. The modified materials show higher recrystallization temperature threshold, increased strength and ductility, and reduced ductile-to-brittle transition temperature compared to pure tungsten.

JOURNAL OF NUCLEAR MATERIALS (2021)

Article Materials Science, Multidisciplinary

Neutron irradiation effects on mechanical properties of ITER specification tungsten

Dmitry Terentyev et al.

Summary: This contribution presents the results of recent neutron irradiation experiments on pure tungsten in the material test reactor BR2 in Belgium. Various irradiation conditions were applied to assess the effects on mechanical properties, revealing a considerable shift in the ductile to brittle transition temperature in the high-temperature region even at low damage doses.

TUNGSTEN (2021)

Article Nuclear Science & Technology

Tungsten modified by potassium doping and rhenium addition for fusion reactor applications

Shuhei Nogami et al.

FUSION ENGINEERING AND DESIGN (2020)

Article Physics, Multidisciplinary

Application of tungsten-copper composite heat sink materials to plasma-facing component mock-ups

A. V. Mueller et al.

PHYSICA SCRIPTA (2020)

Article Nuclear Science & Technology

Smart Tungsten-based Alloys for a First Wall of DEMO

Andrey Litnovsky et al.

FUSION ENGINEERING AND DESIGN (2020)

Article Nuclear Science & Technology

Materials development for new high heat-flux component mock-ups for DEMO

J. W. Coenen et al.

FUSION ENGINEERING AND DESIGN (2019)

Article Nuclear Science & Technology

European materials development: Results and perspective

Gerald Pintsuk et al.

FUSION ENGINEERING AND DESIGN (2019)

Article Materials Science, Multidisciplinary

Correlation of microstructural and mechanical properties of K-doped tungsten fibers used as reinforcement of tungsten matrix for high temperature applications

D. Terentyev et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2019)

Review Materials Science, Multidisciplinary

Behavior of tungsten under irradiation and plasma interaction

Michael Rieth et al.

JOURNAL OF NUCLEAR MATERIALS (2019)

Article Nanoscience & Nanotechnology

Ductile to brittle transition in ITER specification tungsten assessed by combined fracture toughness and bending tests analysis

Chao Yin et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

Article Nuclear Science & Technology

PHENIX US-Japan Collaboration Investigation of Thermal and Mechanical Properties of Thermal Neutron-Shielded Irradiated Tungsten

Lauren M. Garrison et al.

FUSION SCIENCE AND TECHNOLOGY (2019)

Article Materials Science, Multidisciplinary

Correlation between the microstructure, mechanical/thermal properties, and thermal shock resistance of K-doped tungsten alloys

Bo Huang et al.

JOURNAL OF NUCLEAR MATERIALS (2019)

Article Materials Science, Multidisciplinary

Transmutation-induced precipitation in tungsten irradiated with a mixed energy neutron spectrum

Xunxiang Hu et al.

ACTA MATERIALIA (2019)

Article Materials Science, Multidisciplinary

Tensile properties of baseline and advanced tungsten grades for fusion applications

Chao Yin et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2018)

Article Materials Science, Multidisciplinary

Effect of neutron irradiation on rhenium cluster formation in tungsten and tungsten-rhenium alloys

Taehyun Hwang et al.

JOURNAL OF NUCLEAR MATERIALS (2018)

Article Materials Science, Multidisciplinary

Ductilisation of tungsten (W): Tungsten laminated composites

Jens Reiser et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2017)

Article Materials Science, Multidisciplinary

Microstructural evolution of pure tungsten neutron irradiated with a mixed energy spectrum

Takaaki Koyanagi et al.

JOURNAL OF NUCLEAR MATERIALS (2017)

Article Materials Science, Multidisciplinary

Ductilisation of tungsten (W) through cold-rolling: R-curve behaviour

Jens Reiser et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2016)

Article Materials Science, Multidisciplinary

Irradiation hardening of pure tungsten exposed to neutron irradiation

Xunxiang Hu et al.

JOURNAL OF NUCLEAR MATERIALS (2016)

Article Materials Science, Multidisciplinary

Irradiation effects in tungsten-copper laminate composite

L. M. Garrison et al.

JOURNAL OF NUCLEAR MATERIALS (2016)

Article Materials Science, Multidisciplinary

Neutron irradiation effects on the microstructural development of tungsten and tungsten alloys

Akira Hasegawa et al.

JOURNAL OF NUCLEAR MATERIALS (2016)

Article Physics, Multidisciplinary

Thermal shock tests to qualify different tungsten grades as plasma facing material

M. Wirtz et al.

PHYSICA SCRIPTA (2016)

Article Nuclear Science & Technology

European DEMO divertor target: Operational requirements and material-design interface

J. H. You et al.

NUCLEAR MATERIALS AND ENERGY (2016)

Article Nuclear Science & Technology

Effect of neutron irradiation on the microstructure of tungsten

M. Klimenkov et al.

NUCLEAR MATERIALS AND ENERGY (2016)

Article Nuclear Science & Technology

Mechanical and microstructural investigations of tungsten and doped tungsten materials produced via powder injection molding

Steffen Antusch et al.

NUCLEAR MATERIALS AND ENERGY (2015)

Article Materials Science, Multidisciplinary

Fracture behaviour of polycrystalline tungsten

Ermile Gaganidze et al.

JOURNAL OF NUCLEAR MATERIALS (2014)

Article Materials Science, Multidisciplinary

Thermal and mechanical properties of infiltrated W/CuCrZr composite materials for functionally graded heat sink application

J. -H. You et al.

JOURNAL OF NUCLEAR MATERIALS (2013)

Article Materials Science, Multidisciplinary

Tungsten foil laminate for structural divertor applications - Tensile test properties of tungsten foil

Jens Reiser et al.

JOURNAL OF NUCLEAR MATERIALS (2013)

Article Nanoscience & Nanotechnology

W-2 wt.%Y2O3 composite: Microstructure and mechanical properties

M. Battabyal et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

Article Nuclear Science & Technology

Mechanical properties and microstructural characterizations of potassium doped tungsten

Hua Sheng et al.

NUCLEAR ENGINEERING AND DESIGN (2012)

Article Materials Science, Multidisciplinary

Thermo-mechanical and thermal shock characterization of potassium doped tungsten

G. Pintsuk et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2010)

Article Materials Science, Multidisciplinary

Fracture toughness of polycrystalline tungsten alloys

B. Gludovatz et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2010)

Article Nanoscience & Nanotechnology

Deformability enhancement in ultra-fine grained, Ar-contained W compacts by TiC additions up to 1.1%

S. Matsuo et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)

Article Materials Science, Multidisciplinary

Fracture toughness investigations of tungsten alloys and SPD tungsten alloys

M. Faleschini et al.

JOURNAL OF NUCLEAR MATERIALS (2007)