4.6 Article

Combustion-assisted green-synthesized magnesium-doped cadmium ferrite nanoparticles for multifunctional applications

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Materials Science, Ceramics

Implementing an in-situ carbon formation of MoO3 nanoparticles for high performance lithium-ion battery

M. Shahsank et al.

Summary: In this study, MoO3 nanoparticles were synthesized using tamarind seed powder as a novel fuel for a simple solution combustion method. The presence of carbon in the MoO3 nanoparticles provided excellent electrochemical performance, with initial discharge capacity of 1171 mAhg(-1) and stable capacity of 162 mAhg(-1) after 200 cycles, with a close to 100% Columbic efficiency.

CERAMICS INTERNATIONAL (2021)

Article Materials Science, Multidisciplinary

Green synthesis of zirconium phosphate by combustion method: photocatalytic application and microwave-assisted catalytic conversion of aldehyde to nitriles

M. Shashank et al.

Summary: The research focuses on the use of zirconium phosphate nanoparticles for photocatalytic degradation of dyes, showing higher efficiency in basic conditions. Additionally, zirconium phosphate is also used as a catalyst for the nitration of aldehydes in different solvents.

BULLETIN OF MATERIALS SCIENCE (2021)

Article Chemistry, Multidisciplinary

Evaluation of bifunctional applications of CuFe2O4 nanoparticles synthesized by a sonochemical method

M. A. Shilpa Amulya et al.

Summary: CuFe2O4 nanoparticles prepared by a probe sonication method show promising morphological, electrochemical, and dye photodegradation properties, making them potential candidates for various applications. The nanoparticles exhibit semiconductor behavior, weak ferromagnetic behavior, and have been found to be effective in electrochemical and photocatalytic applications, with specific responses depending on the medium pH. The study highlights the potential of CuFe2O4 nanoparticles for versatile applications in different fields.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2021)

Article Chemistry, Physical

CuS/KTa0.75Nb0.25O3 nanocomposite utilizing solar and mechanical energy for catalytic N2 fixation

Xiaoquan Dai et al.

Summary: The work successfully synthesized a CuS/KTN heterojunction composite and applied it in the photo/piezocatalytic conversion of N-2 to NH3, showing higher performance than pure KTN.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Article Chemistry, Physical

Optoelectronic, photocatalytic and biological studies of mixed ligand Cd(II) complex and its fabricated CdO nanoparticles

B. R. Kirthan et al.

Summary: The study focuses on the synthesis of a novel Azo-imine ligand and its mixed ligand Cd(II) Complex, followed by the fabrication of CdO nanoparticles. Characterization using spectroscopic techniques and electrochemical studies revealed the compounds had strong photoluminescence, DNA binding, DNA cleavage activities, as well as satisfactory antibacterial properties.

JOURNAL OF MOLECULAR STRUCTURE (2021)

Article Acoustics

Novel application of Ag/PbBiO2I nanocomposite in piezocatalytic degradation of rhodamine B via harvesting ultrasonic vibration energy

Ziyu Li et al.

Summary: Ag/PbBiO2I nanocomposite was synthesized and applied to piezocatalytic degradation of RhB under ultrasonic vibration. The material's piezoelectric property, as well as the formation of Schottky barriers between Ag nano particles, contribute to the improved efficiency of the piezocatalytic reaction.

ULTRASONICS SONOCHEMISTRY (2021)

Article Acoustics

KNbO3/ZnO heterojunction harvesting ultrasonic mechanical energy and solar energy to efficiently degrade methyl orange

Yi Li et al.

Summary: In this study, a KNbO3/ZnO nanocomposite material was synthesized and demonstrated to have superior performance in the piezo/photocatalytic degradation of methyl orange under simulated sunlight and ultrasonic vibration. The material showed a significantly higher degradation rate compared to pure ZnO, indicating its potential for developing new water purification technologies utilizing solar and mechanical energy.

ULTRASONICS SONOCHEMISTRY (2021)

Review Physics, Applied

Recent progress on 2D magnets: Fundamental mechanism, structural design and modification

Xue Jiang et al.

Summary: This review summarizes the recent progress on 2D magnets, focusing on magnetic exchange interaction, databases, and modification strategies. It presents various types of 2D magnetic materials and their interaction mechanisms.

APPLIED PHYSICS REVIEWS (2021)

Article Chemistry, Multidisciplinary

Non-noble metallic Cu with three different roles in a Cu doped ZnO/Cu/g-C3N4 heterostructure for enhanced Z-scheme photocatalytic activity

Mohammed Abdullah Bajiri et al.

Summary: The study prepared a Cu-doped ZnO/Cu/g-C3N4 heterostructure, effectively enhancing photocatalytic activity, with Cu playing a key role in reducing bandgap, facilitating charge transport, and enhancing catalytic activity. The presence of Cu in different chemical states has been confirmed through various analytical techniques, leading to improved degradation of organic dyes under sunlight irradiation.

NEW JOURNAL OF CHEMISTRY (2021)

Article Chemistry, Physical

A novel Bi2S3/KTa0.75Nb0.25O3 nanocomposite with high efficiency for photocatalytic and piezocatalytic N2 fixation

Lu Chen et al.

Summary: The novel Bi2S3/KTN heterojunction nanocomposite showed good performance in photocatalytic and piezocatalytic N-2 fixation, with Bi2S3 acting as electron trappers to capture photogenerated electrons and promote the spatial separation of charge carriers, leading to enhanced catalytic reaction performance. This work demonstrates the great potential of Bi2S3/KTN in photo/piezocatalytic N-2 fixation.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Chemistry, Multidisciplinary

2D g-C3N4 as a bifunctional photocatalyst for co-catalyst and sacrificial agent-free photocatalytic N2 fixation and dye photodegradation†

Mohammed Abdullah Bajiri et al.

Summary: Photocatalytic N-2 fixation to produce ammonia without any co-catalysts or sacrificial agents was achieved on 2D g-C3N4 for the first time in this study. The 2D g-C3N4 exhibited enhanced NH3 production rate and photodegradation activity compared to bulk g-C3N4 due to its more exposed active sites, high charge separation, and low electron-hole recombination rate.

NEW JOURNAL OF CHEMISTRY (2021)

Review Chemistry, Physical

Natural gas purification by asymmetric membranes: An overview

Xi Chen et al.

Summary: Natural gas is an important source of energy and chemical feedstock, and membrane separation technology is an attractive alternative for purification. Asymmetric membranes are essential for industrial manufacture and applications, with various types and fabrication methods used for different kinds of asymmetric membranes in natural gas purification.

GREEN ENERGY & ENVIRONMENT (2021)

Article Materials Science, Ceramics

Influence of zinc and cadmium co-doping on optical and magnetic properties of cobalt ferrites

M. Shakil et al.

CERAMICS INTERNATIONAL (2020)

Article Materials Science, Multidisciplinary

XPS measurements of air-exposed Cd(Zn)1-xFexTe1-ySey surfaces revisited

M. Medic Ilic et al.

VACUUM (2020)

Article Chemistry, Physical

Sonochemical synthesis of NiFe2O4 nanoparticles: Characterization and their photocatalytic and electrochemical applications

M. A. Shilpa Amulya et al.

APPLIED SURFACE SCIENCE ADVANCES (2020)

Article Chemistry, Physical

Electron paramagnetic resonance studies of the chelate-based ionic liquid in different solvents

Songna Zhang et al.

GREEN ENERGY & ENVIRONMENT (2020)

Article Materials Science, Ceramics

Multifunctional properties of microwave-assisted bioengineered nickel doped cobalt ferrite nanoparticles

M. Madhukara Naik et al.

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2019)

Article Chemistry, Inorganic & Nuclear

Microwave-Assisted ZrO2 Nanoparticles and Its Photocatalytic and Antibacterial Studies

K. Karthik et al.

JOURNAL OF CLUSTER SCIENCE (2019)

Article Materials Science, Multidisciplinary

Fabrication of novel magnetic F-TiO2(B)/carbon nanostructures nanocomposites as photocatalysts for malachite green degradation under visible light

Nasser Arsalani et al.

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2019)

Article Engineering, Environmental

CuO/ZnO/g-C3N4 heterostructures as efficient visible light-driven photocatalysts

Mohammed Abdullah Bajiri et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2019)

Review Chemistry, Multidisciplinary

Bimetallic Nanoparticles: Enhanced Magnetic and Optical Properties for Emerging Biological Applications

Pannaree Srinoi et al.

APPLIED SCIENCES-BASEL (2018)

Article Energy & Fuels

XPS study of OH impurity in solution processed CdS thin films

Natalia Maticiuc et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2017)

Article Chemistry, Multidisciplinary

Optical and Photocatalytic Properties of Solar Light Active Nd-Substituted Ni Ferrite Catalysts: For Environmental Protection

K. N. Harish et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2013)

Review Chemistry, Multidisciplinary

Magnetic Nanoparticles in Magnetic Resonance Imaging and Diagnostics

Christine Ruemenapp et al.

PHARMACEUTICAL RESEARCH (2012)

Article Energy & Fuels

Hybrid solar cells using PbS nanoparticles

Serap Gunes et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2007)

Article Engineering, Chemical

Nanoparticles for electronic device applications: A brief review

I Matsui

JOURNAL OF CHEMICAL ENGINEERING OF JAPAN (2005)

Article Biotechnology & Applied Microbiology

Extraction methods and bioautography for evaluation of medicinal plant antimicrobial activity

A Nostro et al.

LETTERS IN APPLIED MICROBIOLOGY (2000)