☆ 4.7 Article

Macro-meso failure characteristics of circular cavity-contained granite under unconventional cyclic loads: A lab-scale testing

MEASUREMENT (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Mechanical

Insight into the fracture evolution behavior of pre-flawed hollow-cylinder granite under multi-stage increasing-amplitude cyclic loads: A lab-scale testing

Yu Wang et al.

Summary: The study focused on the structural deterioration and fracture evolution behavior of pre-flawed hollow-cylinder granite subjected to multi-stage increasing-amplitude cyclic loads, revealing that rock with high flaw angles exhibit larger volumetric deformation and requires more energy for damage propagation. The research proposed a damage evolution model and analyzed the influence of rock structure on crack network patterns.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2022)

添加到收藏夹

Article Engineering, Environmental

Numerical study on strength and failure characteristics of rock samples with different hole defects

Shaojie Chen et al.

Summary: This study conducted uniaxial compression tests on a rock mass containing various hole defects to analyze their impact on the mechanical properties. The results showed that hole defects reduce the uniaxial compressive strength, peak strain, and elastic modulus of the rock mass, while accelerating crack generation and promoting rock destruction. Different hole geometries greatly affect the magnitude and concentration area of compressive and tensile stresses, ultimately influencing the failure behavior of the rock mass.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2021)

添加到收藏夹

Article Mechanics

Dynamic mechanical behaviors of interbedded marble subjected to multi-level uniaxial compressive cyclic loading conditions: An insight into fracture evolution analysis

Y. Wang et al.

Summary: This study investigated the fracture evolution characteristics of rocks under different interbed orientations using multi-level cyclic compressive loading experiments. The results showed that rock structure significantly impacted fatigue deformation, strength, and dynamic elastic modulus. A damage evolution model was established to simulate the accumulation of damage, revealing the influence of interbed orientation on crack propagation path and failure mode.

ENGINEERING FRACTURE MECHANICS (2021)

添加到收藏夹

Article Engineering, Geological

Influence of pore-like flaws on strength and microcracking behavior of crystalline rock

Jun Peng et al.

Summary: The aggregation of a group of pore-like flaws significantly influences the strength, deformation properties, and microcracking process of crystalline rock. As the number of pores increases, the uniaxial compressive strength and elastic modulus of the rock decrease. Randomly distributed pores cause more uniformly distributed stress and smaller tension zone in numerical models compared to regularly assembled pores. The position of pore-like flaws has negligible influence on the strength and deformation behavior, while the UCS increases progressively with the radius of the pore-like flaw.

INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

A strain-based fatigue damage model for naturally fractured marble subjected to freeze-thaw and uniaxial cyclic loads

Y. Wang et al.

Summary: This study aims to investigate the fatigue damage evolution of rock caused by volumetric deformation from freeze-thaw and cyclic loads, as well as the influence of natural fractures on rock damage characteristics. Experimental results show that frost heaving force acting on natural fractures leads to volume changes in rock, and the damage variable expressed by volumetric strain has a linear relationship with freeze-thaw cycles. Marble exposed to cyclic loads exhibits a two-stage pattern in axial, lateral, and volumetric strain.

INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2021)

添加到收藏夹

Article Engineering, Geological

Influence of excavation damaged zone on the dynamic response of circular cavity subjected to transient stress wave

Huatao Zhao et al.

Summary: The research utilizes the Hoek Brown criteria to calculate the distribution of excavation damaged zone around the cavity at different burial depths, and investigates the dynamic responses of the excavation-damaged cavity under dynamic disturbance using the SEM method. Influencing factors such as the shapes of EDZ, the incident direction of dynamic disturbance, and the dynamic source frequency are identified.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Stress relaxation behaviour of marble under cyclic weak disturbance and confining pressures

Jin Yu et al.

Summary: The influence of cyclic weak disturbance on the stress relaxation of rock depends on the initial stress level and axial strain level, showing different nonlinear growth characteristics. Initially, the relaxation magnitude of weak disturbance increases with the increase of the initial stress level, while the stress relaxation rate nonlinearly decreases with axial strain levels. The weak disturbance effect presents a nonlinear growth characteristic of first decreasing and then increasing as the strain increases.

MEASUREMENT (2021)

添加到收藏夹

Article Engineering, Mechanical

Analytical stress solution and mechanical properties for rock mass containing a hole with complex shape

Lihai Tan et al.

Summary: This study utilized complex variable theory to analyze stress distribution for rock mass with complex-shaped holes, and investigated parameters using mapping function calculation. The research shows that hole shape primarily affects rock stability through its influence on stress concentration.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2021)

添加到收藏夹

Article Engineering, Mechanical

Laboratory earthquake prediction of granite

Chang-Qing Li et al.

Summary: This study investigates the factors leading to sudden slip in earthquakes by studying the stick-slip process of granite samples and analyzing parameters related to stress drop, fault interface topology, and acoustic emission characteristics. The research aims to explain the mechanism of shallow-focus earthquakes.

TRIBOLOGY INTERNATIONAL (2021)

添加到收藏夹

Article Engineering, Geological

Fracture Evolution and Energy Characteristics During Marble Failure Under Triaxial Fatigue Cyclic and Confining Pressure Unloading (FC-CPU) Conditions

Y. Wang et al.

Summary: This study investigates the fracture evolution and energy characteristics of marble under fatigue cyclic loading and confining pressure unloading conditions, showing that the damage accumulation during fatigue loading stage influences the final failure mode and energy conversion. The post-test CT scanning reveals the effects of fatigue cycles on crack pattern and scale after FC-CPU testing, providing insight into the energy changes during the process.

ROCK MECHANICS AND ROCK ENGINEERING (2021)

添加到收藏夹

Article Engineering, Mechanical

Effect of loading frequency on the deformation behaviours of sandstones subjected to cyclic loads and its underlying mechanism

Kang Peng et al.

INTERNATIONAL JOURNAL OF FATIGUE (2020)

添加到收藏夹

Article Mechanics

Dynamic stress concentration and failure characteristics around elliptical cavity subjected to impact loading

Ming Tao et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2020)

添加到收藏夹

Article Mechanics

Experimental study of acoustic emission multi-parameter information characterizing rock crack development

Jing Yang et al.

ENGINEERING FRACTURE MECHANICS (2020)

添加到收藏夹

Article Engineering, Mechanical

Experimental and numerical study on crack development characteristics between two cavities in rock-like material under uniaxial compression

Bing Liu et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2020)

添加到收藏夹

Article Geochemistry & Geophysics

Seismic and Aseismic Preparatory Processes Before Large Stick-Slip Failure

Georg Dresen et al.

PURE AND APPLIED GEOPHYSICS (2020)

添加到收藏夹

Article Energy & Fuels

Analysis of fractures of a hard rock specimen via unloading of central hole with different sectional shapes

Fan Feng et al.

ENERGY SCIENCE & ENGINEERING (2019)

添加到收藏夹

Review Engineering, Geological

Cyclic and Fatigue Behaviour of Rock Materials: Review, Interpretation and Research Perspectives

B. Cerfontaine et al.

ROCK MECHANICS AND ROCK ENGINEERING (2018)

添加到收藏夹

Article Engineering, Geological

Damage-vibration couple control of rock mass blasting for high rock slopes

Ying-guo Hu et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2018)

添加到收藏夹

Article Construction & Building Technology

Failure characteristics and stress distribution of pre-stressed rock specimen with circular cavity subjected to dynamic loading

Ming Tao et al.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2018)

添加到收藏夹

Article Mechanics

Fracture evolution and failure behaviour of marble specimens containing rectangular cavities under uniaxial loading

Zilong Zhou et al.

ENGINEERING FRACTURE MECHANICS (2017)

添加到收藏夹

Proceedings Paper Mining & Mineral Processing

Numerical Simulation of Granite Plates Containing a Cylindrical Opening in Compression

Michail A. Lotidis et al.

ISRM EUROPEAN ROCK MECHANICS SYMPOSIUM EUROCK 2017 (2017)

添加到收藏夹

Article Engineering, Geological

Microstructural investigation of subcritical crack propagation and Fracture Process Zone (FPZ) by the reduction of rock fracture toughness under cyclic loading

Nazife Erarslan

ENGINEERING GEOLOGY (2016)

添加到收藏夹

Article Engineering, Geological

Experimental study of coalescence mechanisms and failure under uniaxial compression of granite containing multiple holes

P. Lin et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2015)

添加到收藏夹

Article Engineering, Geological

Effects of Frequency on the Dynamic Properties of Intact Rock Samples Subjected to Cyclic Loading under Confining Pressure Conditions

Enlong Liu et al.

ROCK MECHANICS AND ROCK ENGINEERING (2012)

添加到收藏夹

Article Engineering, Geological

Fatigue damage variable and evolution of rock subjected to cyclic loading

Jian-Qing Xiao et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2010)

添加到收藏夹

Article Engineering, Environmental

The Complete ISRM Suggested Methods for Rock Characterization, Testing and Monitoring; 1974-2006

A. W. Hatheway

ENVIRONMENTAL & ENGINEERING GEOSCIENCE (2009)

添加到收藏夹

Article Engineering, Geological

Waveform effect on fatigue properties of intact sandstone in uniaxial cyclical loading

MN Bagde et al.

ROCK MECHANICS AND ROCK ENGINEERING (2005)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.