期刊
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
卷 55, 期 49, 页码 12557-12568出版社
AMER CHEMICAL SOC
DOI: 10.1021/acs.iecr.6b03266
关键词
-
资金
- National Natural Science Foundation of China [51573202]
- National High Technology Research and Development Program of China (863 Program) [2013AA032003]
- Guangdong Province Science and Technology Project [2016B090918013]
A sinterable poly(lactic acid) (PLA) foam is critical to the creation of strong interface bonding for the production of large-size PLA bead foam products. To fabricate such a foam, we blended a polyethylene glycol (PEG) that has a low melting temperature and high CO2 solubility with PLA. Solid-state foaming technology was used to foam the PLA/PEG blends, and CO2 was the blowing agent. The PEG was miscible with the PLA and enhanced the crystallization of PLA at a loading of lower than 10 wt % under a CO2 saturation process. Consequently, the PLA/PEG blends did not foam well because of the matrix's improved stiffness. The CO2 saturation process induced the PEG's phase separation because its content was higher than 20 wt %. This weakened the PEG's plasticization effect on the PLA, but it significantly improved the PLA's foaming behavior. This was characterized by both the foam expansion ratio, which increased from 4.6 to 11.8-24.1, and the decreased cell size. We discuss the effects of crystallization and the separated PEG phase on cell nucleation and growth in order to explain the possible operational mechanisms. Both the PEG's self-diffusion behavior and the PLA/PEG's improved foaming behavior enabled us to fabricate large-size PLA bead foam products.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据