相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Fatigue limit prediction model and fatigue crack growth mechanism for selective laser melting Ti6Al4V samples with inherent defects
Zhongwei Xu et al.
INTERNATIONAL JOURNAL OF FATIGUE (2021)
Optimisation of process parameters for an additively manufactured AlSi10Mg alloy: Limitations of the energy density-based approach on porosity and mechanical properties estimation
Maverick Giovagnoli et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Effects of embedded spherical pore on the tensile properties of a selective laser melted Ti6Al4V alloy
L. X. Meng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Effects of electropulsing on the microstructure and microhardness of a selective laser melted Ti6Al4V alloy
J. B. Gao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Ultrafine microstructure development in laser polishing of selective laser melted Ti alloy
Yuhang Li et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
Cracking behavior and control of β-solidifying Ti-40Al-9V-0.5Y alloy produced by selective laser melting
Piao Gao et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
Microstructure and properties of equiatomic Ti-Ni alloy fabricated by selective laser melting
D. C. Ren et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
A highly accurate methodology for the prediction and correlation of mechanical properties based on the slimness ratio of additively manufactured tensile test specimens
Lucas S. Moura et al.
JOURNAL OF MATERIALS SCIENCE (2020)
Selective laser melting of near-α titanium alloy Ti-6Al-2Zr-1Mo-1V: Parameter optimization, heat treatment and mechanical performance
Chao Cai et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
Premature failure of an additively manufactured material
Zhi Wang et al.
NPG ASIA MATERIALS (2020)
Study of pore defect and mechanical properties in selective laser melted Ti6Al4V alloy based on X-ray computed tomography
Wei Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Heterogeneous microstructure and voids dependence of tensile deformation in a selective laser melted AlSi10Mg alloy
D. D. Ben et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Electro-strengthening of the additively manufactured Ti-6Al-4V alloy
Daudi Waryoba et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Effects of defects on tensile and fatigue behaviors of selective laser melted titanium alloy in very high cycle regime
Fulin Liu et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Densification behavior, microstructure evolution, and mechanical performances of selective laser melted Ti-5Al-2.5Sn α titanium alloy: Effect of laser energy input
Kaiwen Wei et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Fatigue behavior of Ti-6Al-4V cellular structures fabricated by additive manufacturing technique
Dechun Ren et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Densification, microstructure evolution and fatigue behavior of Ti-13Nb-13Zr alloy processed by selective laser melting
Libo Zhou et al.
POWDER TECHNOLOGY (2019)
Microstructure and properties of Ti-6Al-4V fabricated by low-power pulsed laser directed energy deposition
Hua Tan et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Optimization of processing parameters and establishment of a relationship between microstructure and mechanical properties of SLM titanium alloy
Zhen Wang et al.
OPTICS AND LASER TECHNOLOGY (2019)
Pore elimination mechanisms during 3D printing of metals
S. Mohammad H. Hojjatzadeh et al.
NATURE COMMUNICATIONS (2019)
Controlling martensitic decomposition during selective laser melting to achieve best ductility in high strength Ti-6Al-4V
A. Zafari et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
SLM lattice structures: Properties, performance, applications and challenges
Tobias Maconachie et al.
MATERIALS & DESIGN (2019)
Optimisation of process parameters to address fundamental challenges during selective laser melting of Ti-6Al-4V: A review
H. Shipley et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2018)
Hardening and softening mechanisms in a nano-lamellar austenitic steel induced by electropulsing treatment
Y. R. Ma et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Topography of as built surfaces generated in metal additive manufacturing: A multi scale analysis from form to roughness
F. Cabanettes et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2018)
Recent advances in the development of aerospace materials
Xuesong Zhang et al.
PROGRESS IN AEROSPACE SCIENCES (2018)
Recovery of tensile properties of twinning-induced plasticity steel via electropulsing induced void healing
C. L. Yang et al.
SCRIPTA MATERIALIA (2018)
Research on Selective Laser Melting of Ti6Al4V: Surface Morphologies, Optimized Processing Zone, and Ductility Improvement Mechanism
Di Wang et al.
METALS (2018)
Influence of defects, surface roughness and HIP on the fatigue strength of Ti-6Al-4V manufactured by additive manufacturing
Hiroshige Masuo et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
High-throughput stochastic tensile performance of additively manufactured stainless steel
Bradley C. Salzbrenner et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Microstructure and mechanical property of selective laser melted Ti6Al4V dependence on laser energy density
Jie Han et al.
RAPID PROTOTYPING JOURNAL (2017)
Is the energy density a reliable parameter for materials synthesis by selective laser melting?
K. G. Prashanth et al.
MATERIALS RESEARCH LETTERS (2017)
On the limitations of Volumetric Energy Density as a design parameter for Selective Laser Melting
Umberto Scipioni Bertoli et al.
MATERIALS & DESIGN (2017)
Defect Formation Mechanisms in Selective Laser Melting: A Review
Bi Zhang et al.
CHINESE JOURNAL OF MECHANICAL ENGINEERING (2017)
In situ tailoring microstructure in additively manufactured Ti-6Al-4V for superior mechanical performance
W. Xu et al.
ACTA MATERIALIA (2017)
Predictive models for physical and mechanical properties of Ti6Al4V produced by Selective Laser Melting
F. Bartolomeu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Correlation between porosity and processing parameters in TiAl6V4 produced by selective laser melting
Galina Kasperovich et al.
MATERIALS & DESIGN (2016)
Influence of defects on mechanical properties of Ti-6Al-4 V components produced by selective laser melting and electron beam melting
Haijun Gong et al.
MATERIALS & DESIGN (2015)
Effects of processing parameters on microstructure and mechanical property of selective laser melted Ti6Al4V
Bo Song et al.
MATERIALS & DESIGN (2012)
A study of the micro structural evolution during selective laser melting of Ti-6Al-4V
Lore Thijs et al.
ACTA MATERIALIA (2010)
Influence of specimen dimensions on the tensile behavior of ultrafine-grained Cu
Y. H. Zhao et al.
SCRIPTA MATERIALIA (2008)