☆ 4.7 Article

Optimization of microstructure and properties of as-cast various Si containing Cu-Cr-Zr alloy by experiments and first-principles calculation

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Nanoscience & Nanotechnology

Study on the variation of properties of Cu-Cr-Zr alloy by different rolling and aging sequence

Jiazhi Li et al.

Summary: The study revealed the relationship between the rolling-aging sequence and the microstructure evolution, mechanical-electrical properties of a hot rolled-quenched Cu-0.67Cr-0.27Zr-0.12Ni-0.03Si-0.04Ti alloy. A good combination of strength and electrical conductivity was achieved in the alloy through a specific aging-rolling-aging process, with strength improvement mainly attributed to dislocation density strengthening.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Enhancing performance of the CuCrZrTiV alloys through increasing recrystallization resistance and two-step thermomechanical treatments

Mingyang Li et al.

Summary: The effects of joint Ti and V addition on the recrystallization behavior, mechanical property and corrosion resistance of CuCrZrTiV alloys were investigated. Results showed that the recrystallization resistance and corrosion resistance of the alloys were significantly improved, and the performance of the alloys was further enhanced by two-step thermomechanical treatments, leading to increased tensile strength and ductility.

JOURNAL OF NUCLEAR MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Microstructure and properties of Cu-Cr-Zr alloy with columnar crystal structure processed by upward continuous casting

Jinshui Chen et al.

Summary: Columnar crystal structure was formed in the Cu-Cr-Zr alloy during thermo-mechanical treatment, resulting in optimized microstructure and significantly refined grains. The alloy with columnar crystal structure and higher Zr content exhibited improved mechanical properties, while maintaining relatively stable electrical conductivity. The ultimate tensile strength was significantly higher after cold drawing in the alloy with a higher Zr content. Discussions and conclusions were made regarding the grain refinement mechanism and strengthening mechanism.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Structural, electronic, mechanical and thermodynamic properties of Cr-Si binary silicides from first-principles investigations

Y. Pan et al.

Summary: Cr-Si binary silicides are promising advanced functional materials widely used in semiconductors, thermoelectric, and high temperature industries. Structural, mechanical, electronic, and thermodynamic properties of Cr-Si silicides were studied using first-principles. A novel Cr2Si orthorhombic structure was predicted and different silicides showed varying properties, with Cr3Si having larger moduli but Cr2Si exhibiting better ductility and plasticity. These findings provide insight into the comprehensive properties of Cr-Si silicides and guide future improvements in their performance.

VACUUM (2021)

添加到收藏夹

Article Chemistry, Physical

Strain induced electronic structure, and magnetic and structural properties in quaternary Heusler alloys ZrRhTiZ (Z = Al, In)

Ram Babu Ray et al.

Summary: Quaternary Heusler alloys ZrRhTiZ (Z = Al, In) exhibit half-metallic ferromagnetic behavior with Curie temperatures exceeding room temperature, making them promising candidates for spintronics and magneto-electronics applications beyond room temperature.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Article Chemistry, Physical

Influence of Zr content on microstructure and mechanical properties of As-cast Al-Zn-Mg-Cu alloy

Yi Yang et al.

Summary: The experimental investigation in this paper focuses on the effect of Zr content on the microstructure refinement and performance improvement of Al-Zn-Mg-Cu alloy. The results show that adding 0.20 wt% of Zr can achieve the best grain refinement effect and mechanical properties.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influences of boron contents on microstructures and mechanical properties of as-casted near α titanium alloy

Xiaozhao Ma et al.

Summary: The influences of boron element and its amounts on phase constitutions, microstructures, textures and compression mechanical properties of Ti-6.5Al-2.5Sn-9Zr-0.5Mo-0.25Si-1Nb-1W-0.1Er-xB (x = 0, 0.1, 0.2, 0.4, 0.6 and 0.8 wt%) have been carefully studied. It is found that 0.2 wt% boron content is the most appropriate amount for microstructural refinement and mechanical properties enhancement while ensuring plasticity in current near alpha titanium alloys.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of microalloying by Ca on the microstructure and mechanical properties of as-cast and wrought Mg-Mg2Si composites

Mehrab Lotfpour et al.

Summary: The study investigated the effects of calcium addition and hot extrusion process on the microstructure modification and mechanical properties enhancement of Mg-3Si metal matrix composite. It was found that calcium addition modified the Mg2Si phase and refined the matrix grains, while hot extrusion induced extreme grain refinement and break up of the eutectic structure, leading to remarkable improvements in tensile properties.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructure evolution and properties of a Cu-Cr-Zr alloy with high strength and high conductivity

Jiazhi Li et al.

Summary: The study investigated the effects of multistage rolling and aging on a Cu-Cr-Zr-Ni-Si-Ti alloy, and found that the optimal comprehensive performance can be achieved through three-stage rolling and aging. The microstructure and various strengthening mechanisms play key roles in improving the mechanical and electrical properties of the alloy.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Investigation of tensile strength, hardness and wear of titanium diboride reinforced AA6061 composite

D. Surrya Prakash et al.

Summary: This study investigates the mechanical properties of AA6061 matrix composite material reinforced with Titanium diboride particulates. The addition of 4% reinforcement particles significantly improved the tensile strength, hardness, and wear resistance of the composite material, potentially extending the life of driver shafts. Overall, the mechanical properties of the composite materials were enhanced by the incorporation of up to 4 wt% of Titanium diboride particulates.

MATERIALS TODAY-PROCEEDINGS (2021)

添加到收藏夹

Article Chemistry, Physical

Grain refinement of hypoeutectic Al-7wt.%Si alloy induced by an Al-V-B master alloy

Y. H. Zhang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Contrasting roles of Laves_Cr2Nb precipitates on the creep properties of novel CuCrNbZr alloys

Ling Wang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Optimizing the strength, ductility and electrical conductivity of a Cu-Cr-Zr alloy by rotary swaging and aging treatment

A. H. Huang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Work softening behavior of Cu-Cr-Ti-Si alloy during cold deformation

Jihui Yuan et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

A phenomenological understanding of the influence of processing methods on creep of Cu-8Cr-4Nb (GRCop-84)

L. G. Vettraino et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

The roles of Hf element in optimizing strength, ductility and electrical conductivity of copper alloys

Rengeng Li et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Influence of Er addition on microstructure and mechanical properties of as-cast Mg-10Li-5Zn alloy

Hao Ji et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Chemistry, Physical

Influence of high pressure torsion-induced grain refinement and subsequent aging on tribological properties of Cu-Cr-Zr alloy

G. Purcek et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

添加到收藏夹

Article Chemistry, Applied

Microstructure and properties of as-cast Cu-Cr-Zr alloys with lanthanum addition

Jilin Li et al.

JOURNAL OF RARE EARTHS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Development of novel Cu-Cr-Nb-Zr alloys with the aid of computational thermodynamics

Ying Yang et al.

MATERIALS & DESIGN (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of temperature on low cycle fatigue behavior of annealed Cu-Cr-Zr-Ti alloy in argon atmosphere

G. Sudarshan Rao et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of rolling and aging processes on microstructure and properties of Cu-Cr-Zr alloy

Huadong Fu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Microstructure and properties of rare earth-containing Cu-Cr-Zr alloy

Zhen-ya Pan et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

The bimodal effect of La on the microstructures and mechanical properties of in-situ A356-TiB2 composites

Tongmin Wang et al.

MATERIALS & DESIGN (2015)

添加到收藏夹

Article Chemistry, Physical

Effects of Zr and (Ni, Si) additions on properties and microstructure of Cu-Cr alloy

Yong Pang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2014)

添加到收藏夹

Article Engineering, Multidisciplinary

Prediction of the thermomechanical behavior of particle-reinforced metal matrix composites

Yi Hua et al.

COMPOSITES PART B-ENGINEERING (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Study of deformation and aging behaviors of a hot rolled-quenched Cu-Cr-Zr-Mg-Si alloy during thermomechanical treatments

Chengdong Xia et al.

MATERIALS & DESIGN (2012)

添加到收藏夹

Article Nanoscience & Nanotechnology

Subgrain structure and internal stress fields in UFG materials: problem of Hall-Petch relation

EV Kozlov et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.