相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Manganese controlled transformation and twinning of the nanoscale austenite in low-carbon-medium-Mn steel
W. Y. Xue et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)
Improved work hardening of a medium carbon-TRIP steel by partial decomposition of retained austenite
X. X. Dong et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Isothermal Holding Treatment of a Transformation-Induced Plasticity Steel for Obtaining Ultrahigh Strength and High Plasticity
X. X. Dong et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2021)
Microstructure and mechanical properties of partially ferritic Q&P steels
Christoph Kickinger et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Effect of the austenitizing temperature on the microstructure evolution and mechanical properties of Q&P steel
Tao Kong et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Effect of matrix structures on TRIP effect and mechanical properties of low-C low-Si Al-added hot-rolled TRIP steels
Xiaodong Tan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Austenite Stability and Strain Hardening in C-Mn-Si Quenching and Partitioning Steels
Christopher B. Finfrock et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)
Modeling retained austenite in Q&P steels accounting for the bainitic transformation and correction of its mismatch on optimal conditions
Yong Li et al.
ACTA MATERIALIA (2020)
Enhanced mechanical properties by retained austenite in medium-carbon Si-rich microalloyed steel treated by quenching-tempering, austempering and austempering-tempering processes
Kui Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Microstructural evolution and tensile properties of 70 GPa.% grade strong and ductile hot-rolled 6Mn steel treated by intercritical annealing
Jiajia Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Serrated yielding in an advanced stainless steel Fe-25Ni-20Cr (wt%)
Abdullah S. Alomari et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Influence of pre-tempering treatment on microstructure and mechanical properties in quenching and partitioning steels with ferrite-martensite start structure
Fei Peng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Simultaneous enhancement of strength and ductility via nanoscale Cu precipitates and ultrafine filmy retained austenite in a novel quench-partitioned and tempered steel
Xuequan Rong et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
The significant impact of phase fraction and austenite stability on the mechanical properties of a low-alloyed TRIP-aided steel: An insight into experimental analysis and predictions
J. N. Huang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Strengthening a medium-carbon steel to 2800 MPa by tailoring nanosized precipitates and the phase ratio
X. X. Dong et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Interaction of martensite and bainite transformations and its dependence on quenching temperature in intercritical quenching and partitioning steels
Fei Peng et al.
MATERIALS & DESIGN (2019)
Constituent-specific properties in quenching and partitioning (Q&P) processed steel
Eun Jung Seo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Carbon and strain partitioning in a quenched and partitioned steel containing ferrite
Xiaodong Tan et al.
ACTA MATERIALIA (2019)
The relationships of microstructure-mechanical properties in quenching and partitioning (Q&P) steel accompanied with microalloyed carbide precipitation
Fei Peng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Benefits of Intercritical Annealing in Quenching and Partitioning Steel
X. Wang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)
Abnormal Strain Rate Sensitivity Driven by a Unit Dislocation-Obstacle Interaction in bcc Fe
Zhitong Bai et al.
PHYSICAL REVIEW LETTERS (2018)
A novel multi-step intercritical heat treatment induces multi-phase microstructure with ultra-low yield ratio and high ductility in advanced high-strength steel
Z. J. Xie et al.
SCRIPTA MATERIALIA (2018)
Microstructure characterization and mechanical behavior analysis in a high strength steel with different proportions of constituent phases
Fei Peng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Comparative study on microstructure and mechanical properties of a C-Mn-Si steel treated by quenching and partitioning (Q & P) processes after a full and intercritical austenitization
Shu Yan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Self-stabilization of untransformed austenite by hydrostatic pressure via martensitic transformation
Nobuo Nakada et al.
ACTA MATERIALIA (2016)
Interaction of carbon partitioning, carbide precipitation and bainite formation during the Q&P process in a low C steel
Farideh HajyAkbary et al.
ACTA MATERIALIA (2016)
Analysis of the mechanical behavior of a 0.3C-1.6Si-3.5Mn (wt%) quenching and partitioning steel
Farideh HajyAkbary et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Influence of partitioning on mechanical behavior of Q&P steels
A. Arlazarov et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Austenite stability and deformation behavior in a cold-rolled transformation-induced plasticity steel with medium manganese content
Z. H. Cai et al.
ACTA MATERIALIA (2015)
High resolution in situ mapping of microstrain and microstructure evolution reveals damage resistance criteria in dual phase steels
Dingshun Yan et al.
ACTA MATERIALIA (2015)
Effects of retained austenite volume fraction, morphology, and carbon content on strength and ductility of nanostructured TRIP-assisted steels
Y. F. Shen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Integrated experimental-simulation analysis of stress and strain partitioning in multiphase alloys
C. C. Tasan et al.
ACTA MATERIALIA (2014)
Strain localization and damage in dual phase steels investigated by coupled in-situ deformation experiments and crystal plasticity simulations
C. C. Tasan et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2014)
On Various Aspects of Decomposition of Austenite in a High-Silicon Steel During Quenching and Partitioning
Mahesh Chandra Somani et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
Microstructure, tensile and toughness properties after quenching and partitioning treatments of a medium-carbon steel
E. Paravicini Bagliani et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Improved ductility of a transformation-induced-plasticity steel by nanoscale austenite lamellae
Y. F. Shen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Mapping strain rate dependence of dislocation-defect interactions by atomistic simulations
Yue Fan et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2013)
A novel design: Partitioning achieved by quenching and tempering (Q-T & P) in an aluminium-added low-density steel
H. L. Yi et al.
SCRIPTA MATERIALIA (2013)
The effect of morphology on the stability of retained austenite in a quenched and partitioned steel
X. C. Xiong et al.
SCRIPTA MATERIALIA (2013)
Deformation behavior of ferrite-austenite duplex lightweight Fe-Mn-Al-C steel
Chang-Hyo Seo et al.
SCRIPTA MATERIALIA (2012)
Volume Change Associated to Carbon Partitioning from Martensite to Austenite
M. J. Santofimia et al.
THERMEC 2011, PTS 1-4 (2012)
Experimental and numerical analysis on formation of stable austenite during the intercritical annealing of 5Mn steel
Haiwen Luo et al.
ACTA MATERIALIA (2011)
Microstructural development during the quenching and partitioning process in a newly designed low-carbon steel
M. J. Santofimia et al.
ACTA MATERIALIA (2011)
Effect of Carbon and Manganese on the Quenching and Partitioning Response of CMnSi Steels
Emmanuel De Moor et al.
ISIJ INTERNATIONAL (2011)
Influence of Isothermal Bainite Transformation Time on Microstructure and Mechanical Properties of Hot-Dip Galvanized TRIP Steel
Wei Ding et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2011)
Effect of microstructure on retained austenite stability and work hardening of TRIP steels
J. Chiang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Bainitic transformation during the two-step quenching and partitioning process in a medium carbon steel containing silicon
H. Y. Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Microstructural Evolution of a Low-Carbon Steel during Application of Quenching and Partitioning Heat Treatments after Partial Austenitization
M. J. Santofimia et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2009)
Influence of carbon partitioning kinetics on final austenite fraction during quenching and partitioning
A. J. Clarke et al.
SCRIPTA MATERIALIA (2009)
Effect of retained austenite stabilized via quench and partitioning on the strain hardening of martensitic steels
E. De Moor et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2008)
Partitioning of carbon from supersaturated plates of ferrite, with application to steel processing and fundamentals of the bainite transformation
JG Speer et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2004)
Carbon partitioning into austenite after martensite transformation
J Speer et al.
ACTA MATERIALIA (2003)
Comparison of the effects of silicon and aluminium on the tensile behaviour of multiphase trip-assisted steels
E Girault et al.
SCRIPTA MATERIALIA (2001)