相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Laser-assisted wire cladding using a retrofitted laser welding system
M. Shehryar Khan et al.
SURFACE ENGINEERING (2021)
Optimizing weld morphology and mechanical properties of laser welded Al-Si coated 22MnB5 by surface application of colloidal graphite
M. Shehryar Khan et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)
Effects of laser beam defocusing on high-strain-rate tensile behavior of press-hardened Zn-coated 22MnB5 steel welds
M. H. Razmpoosh et al.
OPTICS AND LASER TECHNOLOGY (2021)
Numerical modelling and experimental validation of the effect of laser beam defocusing on process optimization during fiber laser welding of automotive press-hardened steels
M. Shehryar Khan et al.
JOURNAL OF MANUFACTURING PROCESSES (2021)
Understanding the effect of prior bainite/martensite on the formation of carbide-free bainite
Sk Md Hasan et al.
PHILOSOPHICAL MAGAZINE (2020)
A review on the laser welding of coated 22MnB5 press-hardened steel and its impact on the production of tailor-welded blanks
M. Shehryar Khan et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2020)
Improving the mechanical properties of PHS laser welded joints by adding Ni foil to suppress δ-ferrite
Xiaming Chen et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Influence of Al-Si coating on microstructure and mechanical properties of fiber laser welded and then press-hardened 22MnB5 steel
Hanwen Yang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Effects of Ni and Cr on Cryogenic Impact Toughness of Bainite/Martensite Multiphase Steels
Zishan Yao et al.
METALS AND MATERIALS INTERNATIONAL (2019)
In situ SEM-EBSD analysis of plastic deformation mechanisms in neutron-irradiated austenitic steel
M. N. Gussev et al.
JOURNAL OF NUCLEAR MATERIALS (2019)
Suppression of δ-ferrite formation on Al-Si coated press-hardened steel during laser welding
Qian Sun et al.
MATERIALS LETTERS (2019)
Effects of nucleation site and morphology of carbide-free bainite on microstructures and properties of bainite/martensite multi-phase steels
Jingli Zhao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Characterization of Mechanical and Metallurgical Notch Effects of DP980 Steel Weld Joints in Fatigue Performance
Gitae Park et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2019)
Chemistry and three-dimensional morphology of martensite-austenite constituent in the bainite structure of low-carbon low-alloy steels
N. Takayama et al.
ACTA MATERIALIA (2018)
Dendritic coarsening model for rapid solidification of Ni-superalloy via electrospark deposition
Pablo D. Enrique et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Effect of filler wire on laser welded blanks of Al-Si-coated 22MnB5 steel
Wenhu Lin et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
On pinning effect of austenite grain growth in Mg-containing low-carbon steel
Chi-Kang Lin et al.
MATERIALS SCIENCE AND TECHNOLOGY (2018)
Refined Bainite Microstructure and Mechanical Properties of a High-Strength Low-Carbon Bainitic Steel Treated by Austempering Below and Above M-S
Junyu Tian et al.
STEEL RESEARCH INTERNATIONAL (2018)
A Study on Microstructure and Properties of PHS Fiber Laser Welded Joints Obtained in Air Atmospheres
Qian Sun et al.
MATERIALS (2018)
The Effect of Large Stress on Bainitic Transformation at Different Transformation Temperatures
Mingxing Zhou et al.
STEEL RESEARCH INTERNATIONAL (2017)
Comparison of microstructure and phase transformation of laser-welded joints in Al-10wt%Si-coated boron steel before and after hot stamping
Tae-Jin Yoon et al.
MATERIALS CHARACTERIZATION (2017)
Formation mechanism of δ-ferrite and metallurgy reaction in molten pool during press-hardened steel laser welding
X. -N. Wang et al.
MATERIALS LETTERS (2017)
The Effects of Cr and Al Addition on Transformation and Properties in Low-Carbon Bainitic Steels
Junyu Tian et al.
METALS (2017)
Optimizing the nickel content in weathering steels to enhance their corrosion resistance in acidic atmospheres
Xuequn Cheng et al.
CORROSION SCIENCE (2017)
Hot stamping of boron steel sheets with tailored properties: A review
Marion Merklein et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Correlation of microstructure and strain hardening behavior in the ultrafine-grained Nb-bearing dual phase steels
A. Ghatei Kalashami et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Below-Ms austempering to obtain refined bainitic structure and enhanced mechanical properties in low-C high-Si/Al steels
Leijie Zhao et al.
SCRIPTA MATERIALIA (2016)
Fusion zone microstructure evolution of fiber laser welded press-hardened steels
Dulal Chandra Saha et al.
SCRIPTA MATERIALIA (2016)
A model for the microstructure behaviour and strength evolution in lath martensite
E. I. Galindo-Nava et al.
ACTA MATERIALIA (2015)
Coalesced Martensite in Pressure Vessel Steels
Hector Pous-Romero et al.
JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME (2014)
Microstructure-properties correlation in fiber laser welding of dual-phase and HSLA steels
D. C. Saha et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Mechanism of misorientation development within coalesced martensite
J. H. Pak et al.
MATERIALS SCIENCE AND TECHNOLOGY (2012)
Promoting the coalescence of bainite platelets
Junhak Pak et al.
SCRIPTA MATERIALIA (2012)
State-of-the-Knowledge on Coating Systems for Hot Stamped Parts
Dong Wei Fan et al.
STEEL RESEARCH INTERNATIONAL (2012)
Influence of Aluminum Alloying and Heating Rate on Austenite Formation in Low Carbon-Manganese Steels
D. San Martin et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2011)
Corrosion Resistance of Different Metallic Coatings on Press-Hardened Steels for Automotive
L. Dosdat et al.
STEEL RESEARCH INTERNATIONAL (2011)
Laser welding of Al-Si coated hot stamping steel
C. Kim et al.
11TH INTERNATIONAL CONFERENCE ON THE MECHANICAL BEHAVIOR OF MATERIALS (ICM11) (2011)
A review on hot stamping
H. Karbasian et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2010)
A study on the formation mechanisms of butterfly-type martensite in Fe-30% Ni alloy using EBSD-based orientation microscopy
Hisashi Sato et al.
ACTA MATERIALIA (2009)
Coalesced bainite by isothermal transformation of reheated weld metal
J. H. Pak et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2008)
The effect of the addition of alloying elements on carbide precipitation and mechanical properties in 5% chromium martensitic steels
P. Michaud et al.
ACTA MATERIALIA (2007)
On the rule of mixtures for the hardness of particle reinforced composites
HS Kim
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)
分享论文
