相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Intensive processing optimization for achieving strong and ductile Al-Mn-Mg-Sc-Zr alloy produced by selective laser melting
D. Bayoumy et al.
MATERIALS & DESIGN (2021)
Improving mechanical anisotropy and corrosion resistance of extruded AA7075 alloy by warm cross rolling and annealing
Zhigang Li et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Influence of Mg content in Al alloys on processing characteristics and dynamically recrystallized microstructure of friction surfacing deposits
Jonas Ehrich et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Abnormal grain growth of 2196 Al-Cu-Li alloy weld seams during extrusion and heat treatment
Xiao Xu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Formation mechanism of abnormal coarse grains on weld seam of extruded ZK60 alloy and the effects on mechanical properties
Jianwei Tang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Advanced heat treated die-cast aluminium composites fabricated by TiB2 nanoparticle implantation
Xixi Dong et al.
MATERIALS & DESIGN (2020)
Formation mechanism and evolution of surface coarse grains on a ZK60 Mg profile extruded by a porthole die
Jianwei Tang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
Microstructure evolution, plastic anisotropy, and intergranular corrosion of Al-Mg-Si sheet processed through a combination of hot extrusion and cold rolling
Zhigang Li et al.
MATERIALS CHARACTERIZATION (2020)
Effect of artificial ageing on strength and ductility of an Al-Cu-Mg-Mn alloy subjected to solutionizing and room-temperature rolling
Zhixiu Wang et al.
MATERIALS CHARACTERIZATION (2020)
Microstructures and mechanical properties of an Al-Cu-Mg-Sc alloy reinforced with in-situ TiB2 particulates
Siming Ma et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Investigation on microstructure and mechanical properties of in-situ TiB2/Al-Cu-Mg composite profile fabricated by porthole die extrusion
Shugang Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Effect of Mg content on microstructure, texture and strength of severely equal channel angular pressed aluminium-magnesium alloys
R. Kalsar et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Segregation of S precipitates at T/Al interfaces and relevant effects on localized corrosion mechanisms in Al-Cu-Mg alloy
Jiwei Geng et al.
MATERIALS CHARACTERIZATION (2020)
Effects of nanosized TiCp dispersion on the high-temperature tensile strength and ductility of in situ TiCp/Al-Cu-Mg-Si nanocomposites
Yu-Yang Gao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Tuning the microstructure features of in-situ nano TiB2/Al-Cu-Mg composites to enhance mechanical properties
Jiwei Geng et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Effects of SiC particle size on mechanical properties of SiC particle reinforced aluminum metal matrix composite
Tengke Ye et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Development of combined groove pressing and rolling to produce ultra-fine grained Al alloys and comparison with cryorolling
Kandarp Changela et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
EBSD, XRD and SRS characterization of a casting Al-7wt%Si alloy processed by equal channel angular extrusion: Dislocation density evaluation
Zahra Zribi et al.
MATERIALS CHARACTERIZATION (2019)
A new approach for improving the elevated-temperature strength and ductility of Al-Cu-Mg-Si alloys with minor amounts of dual-phased submicron/nanosized TiB2-TiC particles
Yu-Yang Gao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Crystal orientation effect on fretting fatigue induced geometrically necessary dislocation distribution in Ni-based single-crystal superalloys
Qi-Nan Han et al.
ACTA MATERIALIA (2019)
Precipitation behavior in an Al-Cu-Mg-Si alloy during ageing
Marat Gazizov et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Microstructure and mechanical properties of TiB2-reinforced 7075 aluminum matrix composites fabricated by laser melting deposition
Bi Jiang et al.
CERAMICS INTERNATIONAL (2019)
Evolution of grain structure, micro-texture and second phase during porthole die extrusion of Al-Zn-Mg alloy
Liang Chen et al.
MATERIALS CHARACTERIZATION (2019)
Crystallographic relationships of T-/S-phase aggregates in an Al-Cu-Mg-Ag alloy
Jonas K. Sunde et al.
ACTA MATERIALIA (2019)
The effect of SiC addition on the dimensional stability of Al-Cu-Mg alloy
Y. F. Song et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Effects of cold predeformation on dissolution of second-phase Al2Cu particles during solution treatment of 2219 Al-Cu alloy forgings
Hailin He et al.
MATERIALS CHARACTERIZATION (2018)
Microstructure and mechanical properties of an in-situ TiB2/Al-Zn-Mg-Cu-Zr composite fabricated by Melt-SHS process
He Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Microstructural characterization and mechanical properties of TiB2 reinforced Al6061 matrix composites produced using stir casting process
Y. Pazhouhanfar et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Investigation on particle strengthening effect in in-situ TiB2/2024 composite by nanoindentation test
Jie Su et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Multiple precipitation reactions and formation of θ′-phase in a pre-deformed Al-Cu alloy
Chunhui Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
The double-edge effect of second-phase particles on the recrystallization behaviour and associated mechanical properties of metallic materials
Ke Huang et al.
PROGRESS IN MATERIALS SCIENCE (2018)
Wear behaviors and wear mechanisms of wrought magnesium alloy AZ31 fabricated by extrusion-shear
H-J Hu et al.
ENGINEERING FAILURE ANALYSIS (2017)
Effect of ageing on precipitation kinetics, tensile and work hardening behavior of Al-Cu-Mg (2024) alloy
Nikolaos D. Alexopoulos et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Ultra-large single crystals by abnormal grain growth
Tomoe Kusama et al.
NATURE COMMUNICATIONS (2017)
Influence of Mg and Li content on the microstructure evolution of Al-Cu-Li alloys during long-term ageing
A. Deschamps et al.
ACTA MATERIALIA (2017)
Effects of Mg content on the mechanical properties and corrosion resistance of Al-Cu-Mg-Ag alloy
Xiao Yan Liu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Atom probe tomography study of Mg-dependent precipitation of Ω phase in initial aged Al-Cu-Mg-Ag alloys
Song Bai et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Effects of TiB2 particles on aging behavior of in-situ TiB2/Al-Cu-Mg composites
Tianran Hong et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Texture, local misorientation, grain boundary and recrystallization fraction in pipeline steels related to hydrogen induced cracking
M. A. Mohtadi-Bonab et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Numerical modeling of subgrain growth of hot extruded Al-4.5Zn-1 Mg alloy in the presence of nanosized dispersoids
A. R. Eivani et al.
COMPUTATIONAL MATERIALS SCIENCE (2014)
Effects of heat treatment on the microstructure and mechanical properties of AA2618 DC cast alloy
E. M. Elgallad et al.
MATERIALS & DESIGN (2014)
Orientation dependence of the dislocation microstructure in compressed body-centered cubic molybdenum
S. Wang et al.
MATERIALS CHARACTERIZATION (2014)
Effect of heat treatment on the tribological properties of Al-Cu-Mg/nanoSiC composites
Ridvan Yamanoglu et al.
MATERIALS & DESIGN (2013)
Abnormal Grain Growth Induced by Cyclic Heat Treatment
Toshihiro Omori et al.
SCIENCE (2013)
Variant selection and the strengthening effect of S precipitates at dislocations in Al-Cu-Mg alloy
Z. Q. Feng et al.
ACTA MATERIALIA (2011)
Solute clustering in Al-Cu-Mg alloys during the early stages of elevated temperature ageing
R. K. W. Marceau et al.
ACTA MATERIALIA (2010)
GPB zones and composite GPB/GPBII zones in Al-Cu-Mg alloys
L. Kovarik et al.
ACTA MATERIALIA (2008)
Precipitates and intermetallic phases in precipitation hardening Al-Cu-Mg-(Li) based alloys
SC Wang et al.
INTERNATIONAL MATERIALS REVIEWS (2005)
Application of finite element method in the hot extrusion of aluminium alloys
XJ Duan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Wear and mechanical properties of sintered copper-tin composites containing graphite or molybdenum disulfide
H Kato et al.
WEAR (2003)