☆ 4.5 Article

Optimization of impeller of deep-sea mining pump for erosive wear reduction based on response surface methodology

MARINE GEORESOURCES & GEOTECHNOLOGY (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Thermodynamics

Simultaneous optimization of multiple engine parameters of a 1-heptanol / gasoline fuel blends operated a port-fuel injection spark- ignition engine using response surface methodology approach

Hayri Yaman et al.

Summary: The study utilized response surface methodology to determine the optimal 1-heptanol percentage, compression ratio, and engine load for achieving the best performance and emission values in a spark ignition engine. Experimental results showed that the addition of 1-heptanol had varying effects on engine performance and emissions, with the proposed optimal operating parameters serving as guidance for the use of 1-heptanol as an alternative fuel in gasoline engines.

ENERGY (2022)

添加到收藏夹

Article Thermodynamics

Performance optimization through response surface methodology of an integrated coal gasification and CI engine fuelled with diesel and low-grade coal-based producer gas

Deepak Kumar Singh et al.

Summary: The study aims to determine the optimal operating condition of dual fuel engines for improved performance and reduced emissions. Through response surface methodology, the optimal values of gasifier equivalence ratio, compression ratio, and engine load were optimized.

ENERGY (2022)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Optimization of WEDM process parameters for machining of heat treated ASSAB '88 tool steel using Response surface methodology (RSM)

Ashish Chaudhary et al.

Summary: The effect of servo reference voltage, peak current, wire feed speed, and wire tension on Material Removal Rate and Surface Roughness in WEDM of heat treated ASSAB '88 tool steel has been investigated. The optimal parameters were obtained using Response Surface Methodology and central composite full factorial design. Mathematical correlations for MRR and SR were formed using regression analysis. 7 solutions were reported for both MRR and SR, with the optimal solution determined by plotting the results.

MATERIALS TODAY-PROCEEDINGS (2022)

添加到收藏夹

Article Engineering, Mechanical

Optimal hydraulic design to minimize erosive wear in a centrifugal slurry pump impeller

Guangjie Peng et al.

Summary: The study used Eulerian-Eulerian mixture model to simulate the solid-liquid twophase flow of quartz sand and water in a slurry pump, and optimized the impeller design to reduce wear and increase lifespan. Experimental results confirmed the effectiveness of the optimized pump design.

ENGINEERING FAILURE ANALYSIS (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Energy characteristics and optimal design of diffuser meridian in an electrical submersible pump

Yang Yang et al.

Summary: This study aimed to improve the energy performance of a typical three-stage ESP using Taguchi methods and numerical simulations. The optimization of the meridian within ESP diffuser was guided by analyzing the influence priority of different factors. Comparison before and after optimization showed the significant helpfulness of Taguchi test in optimizing the meridian within ESP diffuser.

RENEWABLE ENERGY (2021)

添加到收藏夹

Article Energy & Fuels

Preparation, characterization and optimization of micro-encapsulated phase change materials used for thermal storage and temperature regulation depends on response surface methodology

Jinhua Huo et al.

Summary: This study designed and prepared micro-encapsulated phase change materials through in situ polymerization, optimized the preparation process using Response Surface Methodology, and significantly improved energy storage and temperature regulation. The Micro-P showed increased latent heat, improved encapsulation efficiency, excellent thermal stability, and a spherical structure with smooth surface.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Engineering, Marine

Numerical Investigation of the Characteristics of Erosion in a Centrifugal Pump for Transporting Dilute Particle-Laden Flows

Rui-Jie Zhao et al.

Summary: The combination of CFD and DEM is applied to simulate erosion in a centrifugal pump caused by transporting flows with dilute particles. The results show that severe erosive areas are mainly located near the pressure side of the impeller blade and the pump inlet, while the accumulation of particles near the eroded surface can mitigate erosion to some extent.

JOURNAL OF MARINE SCIENCE AND ENGINEERING (2021)

添加到收藏夹

Article Engineering, Mechanical

Sediment erosion in the impeller of a double-suction centrifugal pump - A case study of the Jingtai Yellow River Irrigation Project, China

Zhengjing Shen et al.

WEAR (2019)

添加到收藏夹

Article Engineering, Chemical

Numerical simulation of a centrifugal slurry pump handling solid-liquid mixture: Effect of solids on flow field and performance

Rahul Tarodiya et al.

ADVANCED POWDER TECHNOLOGY (2019)

添加到收藏夹

Article Engineering, Ocean

Design and analysis of an innovative deep-sea lifting motor pump

Yajuan Kang et al.

APPLIED OCEAN RESEARCH (2019)

添加到收藏夹

Article Thermodynamics

Adsorption heat pump optimization by experimental design and response surface methodology

Joana M. Pinheiro et al.

APPLIED THERMAL ENGINEERING (2018)

添加到收藏夹

Article Green & Sustainable Science & Technology

Multi-objective optimization design of bidirectional flow passage components using RSM and NSGA II: A case study of inlet/outlet diffusion segment in pumped storage power station

Xueping Gao et al.

RENEWABLE ENERGY (2018)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Investigation of an efficient shape optimization procedure for centrifugal pump impeller using eagle strategy algorithm and ANN (case study: slurry flow)

Shahram Derakhshan et al.

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2018)

添加到收藏夹

Article Thermodynamics

Performance Enhancement of a Pump Impeller Using Optimal Design Method

Seok-Yun Jeon et al.

JOURNAL OF THERMAL SCIENCE (2017)

添加到收藏夹

Review Engineering, Chemical

Hydraulic performance and erosive wear of centrifugal slurry pumps - A review

Rahul Tarodiya et al.

POWDER TECHNOLOGY (2017)

添加到收藏夹

Proceedings Paper Green & Sustainable Science & Technology

Applying Response Surface Methodology to Design CO2 Storage System with Water Production Considering Efficient Pump Energy Use

Yuko Kawata et al.

13TH INTERNATIONAL CONFERENCE ON GREENHOUSE GAS CONTROL TECHNOLOGIES, GHGT-13 (2017)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Comparison of Stresses in Blade of a Mixed Flow Pump Impeller Designed Using Mean Stream Line Method and Free Vortex Method

Divya Zindani et al.

MATERIALS TODAY-PROCEEDINGS (2017)

添加到收藏夹

Article Thermodynamics

Application of response surface methodology and desirability approach to investigate and optimize the jet pump in a thermoacoustic Stirling heat engine

Peng Yang et al.

APPLIED THERMAL ENGINEERING (2017)

添加到收藏夹

Article Energy & Fuels

Optimal design of multistage centrifugal pump based on the combined energy loss model and computational fluid dynamics

Chuan Wang et al.

APPLIED ENERGY (2017)

添加到收藏夹

Article Thermodynamics

Prediction and parametric analysis of acoustic streaming in a thermoacoustic Stirling heat engine with a jet pump using response surface methodology

Peng Yang et al.

APPLIED THERMAL ENGINEERING (2016)

添加到收藏夹

Article Engineering, Mechanical

High performance hydraulic design techniques of mixed-flow pump impeller and diffuser

Sung Kim et al.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2015)

添加到收藏夹

Article Engineering, Multidisciplinary

Modeling erosion in a centrifugal pump in an Eulerian-Lagrangian frame using OpenFOAM (R)

Alejandro Lopez et al.

OPEN ENGINEERING (2015)

添加到收藏夹

Article Engineering, Mechanical

Numerical simulation and experimental research on the influence of solid-phase characteristics on centrifugal pump performance

Li Yi et al.

CHINESE JOURNAL OF MECHANICAL ENGINEERING (2012)

添加到收藏夹

Article Engineering, Mechanical

Wear analysis of centrifugal slurry pump impellers

Y. A. Khalid et al.

INDUSTRIAL LUBRICATION AND TRIBOLOGY (2007)

添加到收藏夹

Article Engineering, Mechanical

Prediction of centrifugal slurry pump head reduction: An artificial neural networks approach.

T Engin et al.

JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME (2003)

添加到收藏夹

Article Engineering, Mechanical

Particle velocity and size effects in laboratory slurry erosion measurements OR... do you know what your particles are doing?

HM Clark

TRIBOLOGY INTERNATIONAL (2002)

添加到收藏夹

Article Engineering, Chemical

The effect of sand-clay slurries on the performance of centrifugal pumps

A Sellgren et al.

CANADIAN JOURNAL OF CHEMICAL ENGINEERING (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.