4.7 Article

Lever-type quasi-zero stiffness vibration isolator with magnetic spring

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Mechanical

Bio-inspired toe-like structure for low-frequency vibration isolation

Ge Yan et al.

Summary: A novel bio-inspired toe-like structure is developed for low-frequency vibration isolation, possessing favorable high static and low dynamic stiffness characteristics. It effectively isolates low frequency vibration loads and provides a feasible approach to passive vibration control in the low frequency band.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Article Engineering, Mechanical

A theory for bistable vibration isolators

Bo Yan et al.

Summary: This paper presents a general theory for bistable vibration isolators (BVIs) and reveals the bistable vibration isolation mechanism. The advantages of BVIs in vibration isolation are quantitatively verified through theoretical and numerical calculations, providing guidance for the design, analysis, and optimization of BVIs.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Article Engineering, Mechanical

Tunable negative stiffness spring using maxwell normal stress

Shujin Yuan et al.

Summary: This paper proposes a vibration isolator based on a tunable negative stiffness mechanism, which combines the advantages of high-static low-dynamic stiffness isolators and variable stiffness isolators. The use of a novel tunable negative stiffness spring using Maxwell normal stress results in significantly improved stiffness tunable range and energy utilization efficiency due to the newly designed magnetic circuit. Experimental results demonstrate that the device can produce online tunable negative stiffness, expanding the isolation bandwidth and significantly improving vibration isolation performance.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

Article Mathematics, Applied

Optimizing elastic potential energy via geometric nonlinear stiffness

Gianluca Gatti

Summary: This paper presents a strategy for optimizing a nonlinear elastic mechanical system to increase elastic potential energy compared to a linear counterpart. Theoretical insights and asymptotic trends for optimum parameter selection are provided to aid in design. A prototype device is assembled and tested to demonstrate the theoretical discussions.

COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION (2021)

Review Mechanics

Bio-Inspired Vibration Isolation: Methodology and Design

Ge Yan et al.

Summary: This review provides an overview of recent studies on bio-inspired vibration isolators, categorizing key isolation mechanisms and performance characteristics to guide the design of new bio-inspired isolators for improved vibration isolation performance.

APPLIED MECHANICS REVIEWS (2021)

Article Engineering, Mechanical

An innovative quasi-zero stiffness isolator with three pairs of oblique springs

Feng Zhao et al.

Summary: This paper introduces an innovative design of quasi-zero stiffness isolator with three pairs of oblique springs, optimizing for lower transmissibility and wider QZS region. The design is validated through static and dynamic analyses, showing improved performance compared to traditional isolators.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

Article Acoustics

A quasi-zero-stiffness dynamic vibration absorber

Yaopeng Chang et al.

Summary: This paper proposes a quasi-zero-stiffness (QZS) DVA for ultra-low frequency vibration absorption, which is designed using a simple oblique-spring model and verified for its dynamic behavior through the harmonic balance method (HBM) and numerical analyses. Experimental results demonstrate the excellent performance of QZS DVA in absorbing ultra-low frequency vibrations.

JOURNAL OF SOUND AND VIBRATION (2021)

Article Acoustics

A novel lever-type vibration isolator with eddy current damping

Bo Yan et al.

Summary: This study proposes a lever-type vibration isolator with eddy current damping, which can broaden the isolation band by adjusting the lever ratio and improve the vibration suppression performance. The effects of lever ratio, tip mass, material properties, geometric parameters, and excitation amplitude on vibration isolation performance are analyzed. ECD can further enhance vibration suppression in the resonance region, while transmissibility tends to stabilize in the isolation region with increasing lever ratio.

JOURNAL OF SOUND AND VIBRATION (2021)

Article Engineering, Mechanical

Design and test of an adjustable quasi-zero stiffness device and its use to suspend masses on a multi-modal structure

A. D. Shaw et al.

Summary: This paper describes a device capable of exhibiting quasi-zero stiffness, with independent adjustment mechanisms for stiffness and symmetry, allowing for extremely low stiffness adjustment. Experimental testing shows that the device locks-up due to friction at low frequencies, but acts as an efficient linear isolator at high frequencies.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

Article Engineering, Mechanical

A novel nonlinear mechanical oscillator and its application in vibration isolation and energy harvesting

Tao Yang et al.

Summary: This study introduces the theory and method of vibration isolation and energy harvesting based on the high-order quasi-zero stiffness (HQZS) mechanism. Research results indicate that the HQZS oscillator shows better performance for ultra-low stochastic excitation intensity or harmonic excitation.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

Article Engineering, Mechanical

Simultaneous vibration reduction and energy harvesting of a nonlinear oscillator using a nonlinear electromagnetic vibration absorber-inerter

Paul Kakou et al.

Summary: This study introduces the concept of simultaneous vibration mitigation and energy harvesting for nonlinear oscillating structures using a novel nonlinear electromagnetic resonant shunt tuned mass damper-inerter (NERS-TMDI). The results show that the proposed NERS-TMDI configurations outperform existing methods and grounding the electromagnetic transducer extends its effectiveness. This opens up future opportunities for optimizing the design of NERS-TMDI for superior performance.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

Article Engineering, Mechanical

A bistable vibration isolator with nonlinear electromagnetic shunt damping

Bo Yan et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

Article Mathematics, Applied

Statics and dynamics of a nonlinear oscillator with quasi-zero stiffness behaviour for large deflections

Gianluca Gatti

COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION (2020)

Article Engineering, Mechanical

Design and experimental investigation of ultra-low frequency vibration isolation during neonatal transport

Qiang Wang et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

Article Engineering, Mechanical

A bio-inspired isolator based on characteristics of quasi-zero stiffness and bird multi-layer neck

Tianchang Deng et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

Article Engineering, Mechanical

Superior nonlinear passive damping characteristics of the bio-inspired limb-like or X-shaped structure

Jing Bian et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

Article Engineering, Mechanical

Some diverse examples of exploiting the beneficial effects of geometric stiffness nonlinearity

G. Gatti et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

Article Engineering, Mechanical

A novel bio-inspired anti-vibration structure for operating hand-held jackhammers

Xingjian Ling et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

Article Engineering, Mechanical

Multi-layer electromagnetic spring with tunable negative stiffness for semi-active vibration isolation

Huayan Pu et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

Article Instruments & Instrumentation

A K-shaped spring configuration to boost elastic potential energy

Gianluca Gatti

SMART MATERIALS AND STRUCTURES (2019)

Article Automation & Control Systems

Nonlinear Electromagnetic Shunt Damping for Nonlinear Vibration Isolators

Bo Yan et al.

IEEE-ASME TRANSACTIONS ON MECHATRONICS (2019)

Review Acoustics

Nonlinear dissipative devices in structural vibration control: A review

Zheng Lu et al.

JOURNAL OF SOUND AND VIBRATION (2018)

Article Engineering, Mechanical

A vari-stiffness nonlinear isolator with magnetic effects: Theoretical modeling and experimental verification

Bo Yan et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

Article Acoustics

A lever-type nonlinear energy sink

Jian Zang et al.

JOURNAL OF SOUND AND VIBRATION (2018)

Article Mechanics

Experimental Investigation of a Two-Stage Nonlinear Vibration Isolation System With High-Static-Low-Dynamic Stiffness

Zeqi Lu et al.

JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2017)

Article Automation & Control Systems

Self-Sensing Electromagnetic Transducer for Vibration Control of Space Antenna Reflector

Bo Yan et al.

IEEE-ASME TRANSACTIONS ON MECHATRONICS (2017)

Article Engineering, Mechanical

Analysis and design of a nonlinear stiffness and damping system with a scissor-like structure

Xiuting Sun et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2016)

Article Engineering, Mechanical

A nonlinear vibration isolator achieving high-static-low-dynamic stiffness and tunable anti-resonance frequency band

Xiuting Sun et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2016)

Article Engineering, Mechanical

Vibration isolation using a hybrid lever-type isolation system with an X-shape supporting structure

Chunchuan Liu et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2015)

Review Engineering, Mechanical

Recent advances in micro-vibration isolation

Chunchuan Liu et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2015)

Article Instruments & Instrumentation

Negative impedance shunted electromagnetic absorber for broadband absorbing: experimental investigation

Bo Yan et al.

SMART MATERIALS AND STRUCTURES (2014)

Article Acoustics

On the Performance of a Two-Stage Vibration Isolation System Which has Geometrically Nonlinear Stiffness

Zeqi Lu et al.

JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME (2014)

Article Acoustics

Nonlinear vibration isolator with adjustable restoring force

Yoshikazu Araki et al.

JOURNAL OF SOUND AND VIBRATION (2013)

Article Engineering, Mechanical

Study on the force transmissibility of vibration isolators with geometric nonlinear damping

Jingya Sun et al.

NONLINEAR DYNAMICS (2013)

Article Engineering, Mechanical

Force and displacement transmissibility of a nonlinear isolator with high-static-low-dynamic-stiffness

A. Carrella et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2012)

Article Acoustics

A tunable high-static-low-dynamic stiffness vibration isolator

N. Zhou et al.

JOURNAL OF SOUND AND VIBRATION (2010)

Article Acoustics

On the force transmissibility of a vibration isolator with quasi-zero-stiffness

A. Carrella et al.

JOURNAL OF SOUND AND VIBRATION (2009)

Article Acoustics

Theoretical design parameters for a quasi-zero stiffness magnetic spring for vibration isolation

Will S. Robertson et al.

JOURNAL OF SOUND AND VIBRATION (2009)

Article Acoustics

Vibration isolation using extreme geometric nonlinearity

L. N. Virgin et al.

JOURNAL OF SOUND AND VIBRATION (2008)

Article Acoustics

On the jump-up and jump-down frequencies of the Duffing oscillator

M. J. Brennan et al.

JOURNAL OF SOUND AND VIBRATION (2008)

Review Acoustics

Recent advances in nonlinear passive vibration isolators

R. A. Ibrahim

JOURNAL OF SOUND AND VIBRATION (2008)

Article Acoustics

A study of a nonlinear vibration isolator with a quasi-zero stiffness characteristic

Ivana Kovacic et al.

JOURNAL OF SOUND AND VIBRATION (2008)

Article Acoustics

Static analysis of a passive vibration isolator with quasi-zero-stiffness characteristic

A. Carrella et al.

JOURNAL OF SOUND AND VIBRATION (2007)

Article Acoustics

Concept and model of eddy current damper for vibration suppression of a beam

HA Sodano et al.

JOURNAL OF SOUND AND VIBRATION (2005)