☆ 4.7 Article

One-step entrapment of a PS-PEGMA amphiphilic copolymer on the outer surface of a hollow fiber membrane via TIPS process using triple-orifice spinneret

JOURNAL OF MEMBRANE SCIENCE (2021)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Chemical

Effect of polymer molecular weight on structure and performance of PVDF hollow fiber membranes prepared via TIPS process with co-extrusion of solvent using triple orifice spinneret

Pengfei Zhang et al.

Summary: This study investigates the effects of PVDF molecular weight and concentration on the characteristics of hollow fiber membranes prepared using the TIPS process. It is found that choosing the appropriate polymer molecular weight and concentration is essential for obtaining a membrane with considerable water permeability stability.

JOURNAL OF MEMBRANE SCIENCE (2021)

添加到收藏夹

Article Engineering, Chemical

Development of membranes with well-dispersed polyampholytic copolymer via a composite coagulation process

Sheng-Yao Wang et al.

Summary: A strategy to fabricate membranes with well-dispersed polyampholytic copolymers via a composite coagulation process is proposed, allowing for one-step membrane preparation and modification. The newly fabricated membranes exhibited greater water flux, better antifouling properties, and higher stability compared to traditional surface-coated membranes.

JOURNAL OF MEMBRANE SCIENCE (2021)

添加到收藏夹

Article Engineering, Chemical

Hollow fiber membranes with hierarchical spherulite surface structure developed by thermally induced phase separation using triple-orifice spinneret for membrane distillation

Chuanjie Fang et al.

Summary: PVDF hollow fiber membranes were developed for membrane distillation (MD) using the thermally induced phase separation (TIPS) process with solvent co-extrusion. The membranes exhibited high water vapor permeability and excellent wetting resistance due to the unique surface structures achieved through solvent co-extrusion. This one-step fabrication process allowed for the creation of various surface morphologies and provided a new, simple, and effective alternative for high-performance MD desalination membranes.

JOURNAL OF MEMBRANE SCIENCE (2021)

添加到收藏夹

Article Chemistry, Physical

One step surfactant entrapment onto PVDF hollow fiber membrane surface by the TIPS process using a triple-layer orifice spinneret

Chuanjie Fang et al.

Summary: The one-step entrapment of various surfactants on the outer surface of PVDF hollow fiber membrane during the air gap distance via thermally induced phase separation (TIPS) process significantly improves membrane hydrophilicity and resistance against protein fouling, making it particularly suitable for anti-fouling applications.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

添加到收藏夹

Article Engineering, Chemical

Failure of sulfobetaine methacrylate as antifouling material for steam-sterilized membranes and a potential alternative

Chen-Hua Hsu et al.

Summary: This study demonstrates that copolymers with SBMA units are ineffective in providing antifouling properties to PVDF membranes after steam sterilization, while copolymers with SBAA units remain unaffected. It is concluded that using SBAA derivatives is preferable for improving membrane fouling resistance in scenarios where steam sterilization is necessary.

JOURNAL OF MEMBRANE SCIENCE (2021)

添加到收藏夹

Article Engineering, Chemical

Effect of mass transfer at the interface of the polymer solution and extruded solvent during the air gap on membrane structures and performances in TIPS process using triple-orifice spinneret

Chuanjie Fang et al.

JOURNAL OF MEMBRANE SCIENCE (2020)

添加到收藏夹

Review Engineering, Chemical

Thinking the future of membranes: Perspectives for advanced and new membrane materials and manufacturing processes

Suzana P. Nunes et al.

JOURNAL OF MEMBRANE SCIENCE (2020)

添加到收藏夹

Article Polymer Science

Hydrophilic modification of polyvinylidene fluoride membrane by blending amphiphilic copolymer via thermally induced phase separation

Yu-tao Jin et al.

POLYMERS FOR ADVANCED TECHNOLOGIES (2019)

添加到收藏夹

Article Engineering, Chemical

Tuning the molecular design of random copolymers for enhancing the biofouling mitigation of membrane materials

Irish Valerie Maggay et al.

JOURNAL OF MEMBRANE SCIENCE (2019)

添加到收藏夹

Article Engineering, Chemical

Understanding the multiple functions of styrene-co-maleic anhydride in fabricating polyvinylidene fluoride hollow fiber membrane via coupled phase inversion process and its effect on surface infiltration behavior and membrane permeability

Pengfei Zhang et al.

JOURNAL OF MEMBRANE SCIENCE (2019)

添加到收藏夹

Article Chemistry, Physical

A directional entrapment modification on the polyethylene surface by the amphiphilic modifier of stearyl-alcohol poly(ethylene oxide) ether

Qiang Lu et al.

APPLIED SURFACE SCIENCE (2018)

添加到收藏夹

Article Engineering, Chemical

Poly(ethylene oxide)-block-poly(methyl methacrylate) diblock copolymers as functional additive for poly(vinylidene fluoride) ultrafiltration membranes with tailored separation performance

Jens Meyer et al.

JOURNAL OF MEMBRANE SCIENCE (2018)

添加到收藏夹

Article Engineering, Chemical

Segregation-induced in situ hydrophilic modification of poly (vinylidene fluoride) ultrafiltration membranes via sticky poly (ethylene glycol) blending

Hongguang Sun et al.

JOURNAL OF MEMBRANE SCIENCE (2018)

添加到收藏夹

Article Engineering, Chemical

Direct in-situ modification of PVDF membranes with a zwitterionic copolymer to form bi-continuous and fouling resistant membranes

Gian Vincent Dizon et al.

JOURNAL OF MEMBRANE SCIENCE (2018)

添加到收藏夹

Review Engineering, Chemical

Structure design and applications of dual-layer polymeric membranes

Qian-Cheng Xia et al.

JOURNAL OF MEMBRANE SCIENCE (2018)

添加到收藏夹

Article Engineering, Chemical

Introducing a PEGylated diblock copolymer into PVDF hollow-fibers for reducing their fouling propensity

Hao-Tung Lin et al.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2018)

添加到收藏夹

Article Engineering, Chemical

Effects of methacrylate based amphiphilic block copolymer additives on ultra filtration PVDF membrane formation

Sang-Hee Park et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2018)

添加到收藏夹

Article Chemistry, Physical

Tailoring the surface pore size of hollow fiber membranes in the TIPS process

Chuanjie Fang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

添加到收藏夹

Article Chemistry, Physical

Tailoring both the surface pore size and sub-layer structures of PVDF membranes prepared by the TIPS process with a triple orifice spinneret

Chuanjie Fang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

添加到收藏夹

Article Engineering, Chemical

Achieving persistent high-flux membranes via kinetic and thermodynamic synergistic manipulation of surface segregation process

Mingrui He et al.

JOURNAL OF MEMBRANE SCIENCE (2017)

添加到收藏夹

Article Engineering, Chemical

Fabrication and characterization of amphiphilic PVDF copolymer ultrafiltration membrane with high anti-fouling property

Jianliang Shen et al.

JOURNAL OF MEMBRANE SCIENCE (2017)

添加到收藏夹

Article Engineering, Chemical

Thermally induced phase separation and electrospinning methods for emerging membrane applications: A review

Jeong F. Kim et al.

AICHE JOURNAL (2016)

添加到收藏夹

Article Engineering, Chemical

Antifouling PVDF membrane prepared by VIPS for microalgae harvesting

Antoine Venault et al.

CHEMICAL ENGINEERING SCIENCE (2016)

添加到收藏夹

Article Engineering, Chemical

Hemocompatibility of PVDF/PS-b-PEGMA membranes prepared by LIPS process

Antoine Venault et al.

JOURNAL OF MEMBRANE SCIENCE (2015)

添加到收藏夹

Article Engineering, Chemical

Low-biofouling membranes prepared by liquid-induced phase separation of the PVDF/polystyrene-b-poly (ethylene glycol) methacrylate blend

Antoine Venault et al.

JOURNAL OF MEMBRANE SCIENCE (2014)

添加到收藏夹

Article Engineering, Chemical

PVDF hollow fiber membranes prepared from green diluent via thermally induced phase separation: Effect of PVDF molecular weight

Naser Tavajohi Hassankiadeh et al.

JOURNAL OF MEMBRANE SCIENCE (2014)

添加到收藏夹

Article Engineering, Chemical

Reorganization of the surface geometry of hollow-fiber membranes using dip-coating and vapor-induced phase separation

Yan Hao et al.

JOURNAL OF MEMBRANE SCIENCE (2014)

添加到收藏夹

Article Engineering, Chemical

High performance ultrafiltration membrane composed of PVDF blended with its derivative copolymer PVDF-g-PEGMA

Baicang Liu et al.

JOURNAL OF MEMBRANE SCIENCE (2013)

添加到收藏夹

Article Chemistry, Multidisciplinary

Surface Self-Assembled PEGylation of Fluoro-Based PVDF Membranes via Hydrophobic-Driven Copolymer Anchoring for Ultra-Stable Biofouling Resistance

Nien-Jung Lin et al.

LANGMUIR (2013)

添加到收藏夹

Review Engineering, Chemical

Progress in the production and modification of PVDF membranes

Fu Liu et al.

JOURNAL OF MEMBRANE SCIENCE (2011)

添加到收藏夹

Article Engineering, Chemical

Preparation and characterization of poly(vinyl butyral) hollow fiber membrane via thermally induced phase separation with diluent polyethylene glycol 200

Yun-Ren Qiu et al.

DESALINATION (2010)

添加到收藏夹

Article Engineering, Chemical

Preparation of PVDF hollow fiber membrane from a ternary polymer/solvent/nonsolvent system via thermally induced phase separation (TIPS) method

Saeid Rajabzadeh et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2008)

添加到收藏夹

Article Polymer Science

Surface immobilization of polymer brushes onto porous poly(vinylidene fluoride) membrane by electron beam to improve the hydrophilicity and fouling resistance

Fu Liu et al.

POLYMER (2007)

添加到收藏夹

Article Engineering, Chemical

Hollow fiber membranes obtained by simultaneous spinning of two polymer solutions: a morphological study

CC Pereira et al.

JOURNAL OF MEMBRANE SCIENCE (2003)

添加到收藏夹

Article Polymer Science

Preparation of porous membrane by combined use of thermally induced phase separation and immersion precipitation

H Matsuyama et al.

POLYMER (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.