相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Alloys-by-design: Application to new superalloys for additive manufacturing
Yuanbo T. Tang et al.
ACTA MATERIALIA (2021)
Metallurgy, mechanistic models and machine learning in metal printing
T. DebRoy et al.
NATURE REVIEWS MATERIALS (2021)
Direct fabrication of single-crystal-like structure using quasi-continuous-wave laser additive manufacturing
Hui Xiao et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
Reducing hot tearing by grain boundary segregation engineering in additive manufacturing: example of an AlxCoCrFeNi high-entropy alloy
Zhongji Sun et al.
ACTA MATERIALIA (2021)
Steels in additive manufacturing: A review of their microstructure and properties
P. Bajaj et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Revealing the Mechanisms of Grain Nucleation and Formation During Additive Manufacturing
Michael Bermingham et al.
JOM (2020)
Analysis of cyclic phase transformations during additive manufacturing of hardenable tool steel by in-situ X-ray diffraction experiments
Jeremy Epp et al.
SCRIPTA MATERIALIA (2020)
Evolution of cellular dislocation structures and defects in additively manufactured austenitic stainless steel under ion irradiation
Shilei Li et al.
SCRIPTA MATERIALIA (2020)
Grain structure control during metal 3D printing by high-intensity ultrasound
C. J. Todaro et al.
NATURE COMMUNICATIONS (2020)
Influence of keyhole and conduction mode melting for top-hat shaped beam profiles in laser powder bed fusion
Christian Tenbrock et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)
Premature failure of an additively manufactured material
Zhi Wang et al.
NPG ASIA MATERIALS (2020)
The origin of high-density dislocations in additively manufactured metals
Ge Wang et al.
MATERIALS RESEARCH LETTERS (2020)
Origin of dislocation structures in an additively manufactured austenitic stainless steel 316L
K. M. Bertsch et al.
ACTA MATERIALIA (2020)
Solid-State Metal Additive Manufacturing: A Review
Nihan Tuncer et al.
JOM (2020)
The effect of laser scanning strategies on texture, mechanical properties, and site-specific grain orientation in selective laser melted 316L SS
Jithin James Marattukalam et al.
MATERIALS & DESIGN (2020)
Microstructural heterogeneity and mechanical anisotropy of 18Ni-330 maraging steel fabricated by selective laser melting: The effect of build orientation and height
Yi Yao et al.
JOURNAL OF MATERIALS RESEARCH (2020)
High-strength Damascus steel by additive manufacturing
Philipp Kuernsteiner et al.
NATURE (2020)
A modified volumetric energy density-based approach for porosity assessment in additive manufacturing process design
Paolo Ferro et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Ordered nitrogen complexes overcoming strength-ductility trade-off in an additively manufactured high-entropy alloy
Dandan Zhao et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2020)
Towards prediction of microstructure during laser based additive manufacturing process of Co-Cr-Mo powder beds
Pikee Priya et al.
MATERIALS & DESIGN (2020)
Additive manufacturing of Ti6Al4V alloy: A review
Shunyu Liu et al.
MATERIALS & DESIGN (2019)
Promoting the columnar to equiaxed transition and grain refinement of titanium alloys during additive manufacturing
M. J. Bermingham et al.
ACTA MATERIALIA (2019)
Density and mechanical properties in selective laser melting of Invar 36 and stainless steel 316L
Mostafa Yakout et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Effect of selective laser melting parameters on morphology, microstructure, densification and mechanical properties of supersaturated silver alloy
Wei Xiong et al.
MATERIALS & DESIGN (2019)
3D printing of Aluminium alloys: Additive Manufacturing of Aluminium alloys using selective laser melting
Nesma T. Aboulkhair et al.
PROGRESS IN MATERIALS SCIENCE (2019)
Modeling of thermal and solidification behavior during laser additive manufacturing of AlSi10Mg alloy powders and its experimental validation
Mihir Samantaray et al.
JOURNAL OF LASER APPLICATIONS (2019)
Selective laser melting enabling the hierarchically heterogeneous microstructure and excellent mechanical properties in an interstitial solute strengthened high entropy alloy
Z. G. Zhu et al.
MATERIALS RESEARCH LETTERS (2019)
Microscale residual stresses in additively manufactured stainless steel
Wen Chen et al.
NATURE COMMUNICATIONS (2019)
3D printing of ceramics: A review
Zhangwei Chen et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)
Additive manufacturing of ultrafine-grained high-strength titanium alloys
Duyao Zhang et al.
NATURE (2019)
On the origin of microstructural banding in Ti-6Al4V wire-arc based high deposition rate additive manufacturing
Alistair Ho et al.
ACTA MATERIALIA (2019)
Solute clustering and supersaturated solid solution of AlSi10Mg alloy fabricated by selective laser melting
Takashi Maeshima et al.
HELIYON (2019)
Additively manufactured hierarchical stainless steels with high strength and ductility
Y. Morris Wang et al.
NATURE MATERIALS (2018)
A comparison of Selective Laser Melting with bulk rapid solidification of AlSi10Mg alloy
Silvia Marola et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Solid-state additive manufacturing and repairing by cold spraying: A review
Wenya Li et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)
Processing optimisation, mechanical properties and microstructural evolution during selective laser melting of Cu-15Sn high-tin bronze
Zhongfa Mao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Dislocation network in additive manufactured steel breaks strength-ductility trade-off
Leifeng Liu et al.
MATERIALS TODAY (2018)
Additive manufacturing: scientific and technological challenges, market uptake and opportunities
Syed A. M. Tofail et al.
MATERIALS TODAY (2018)
Additive manufacturing of metallic components - Process, structure and properties
T. DebRoy et al.
PROGRESS IN MATERIALS SCIENCE (2018)
Columnar to equiaxed transition in Al-Mg(-Sc)-Zr alloys produced by selective laser melting
Kun V. Yang et al.
SCRIPTA MATERIALIA (2018)
Additive Manufacturing of Metallic and Ceramic Components by the Material Extrusion of Highly-Filled Polymers: A Review and Future Perspectives
Joamin Gonzalez-Gutierrez et al.
MATERIALS (2018)
Interfacial characteristic and mechanical performance of maraging steel-copper functional bimetal produced by selective laser melting based hybrid manufacture
Chaolin Tan et al.
MATERIALS & DESIGN (2018)
Microstructure prediction of selective laser melting AlSi10Mg using finite element analysis
Shiwen Liu et al.
MATERIALS & DESIGN (2018)
Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review
Y. Kok et al.
MATERIALS & DESIGN (2018)
Influence of SLM scan-speed on microstructure, precipitation of Al3Sc particles and mechanical properties in Sc- and Zr-modified Al-Mg alloys
A. B. Spierings et al.
MATERIALS & DESIGN (2018)
A sensitivity analysis of the columnar-to-equiaxed transition for Ni-based superalloys in electron beam additive manufacturing
M. Haines et al.
COMPUTATIONAL MATERIALS SCIENCE (2018)
Fusion zone geometries, cooling rates and solidification parameters during wire arc additive manufacturing
W. Ou et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)
Peritectic titanium alloys for 3D printing
Pere Barriobero-Vila et al.
NATURE COMMUNICATIONS (2018)
Mitigation of lack of fusion defects in powder bed fusion additive manufacturing
T. Mukherjee et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Microstructure and mechanical properties of Ti-2Al alloyed with Mo formed in laser additive manufacture
Fengying Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Anisotropic tensile behavior of in situ precipitation strengthened Inconel 718 fabricated by additive manufacturing
Mang Ni et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Influence of energy density on metallurgy and properties in metal additive manufacturing
Shahir M. Yusuf et al.
MATERIALS SCIENCE AND TECHNOLOGY (2017)
3D printing of high-strength aluminium alloys
John H. Martin et al.
NATURE (2017)
Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti-6Al-4V and high-entropy alloys
Stephane Gorsse et al.
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2017)
Design for additive manufacturing with site-specific properties in metals and alloys
S. Tammas-Williams et al.
SCRIPTA MATERIALIA (2017)
In situ investigation of phase transformations in Ti-6Al-4V under additive manufacturing conditions combining laser melting and high-speed micro-X-ray diffraction
C. Kenel et al.
SCIENTIFIC REPORTS (2017)
An Overview of Additive Manufacturing of Titanium Components by Directed Energy Deposition: Microstructure and Mechanical Properties
Abdollah Saboori et al.
APPLIED SCIENCES-BASEL (2017)
Is the energy density a reliable parameter for materials synthesis by selective laser melting?
K. G. Prashanth et al.
MATERIALS RESEARCH LETTERS (2017)
The effect of interdendritic δ phase on the mechanical properties of Alloy 718 built up by additive manufacturing
Yen-Ling Kuo et al.
MATERIALS & DESIGN (2017)
On the limitations of Volumetric Energy Density as a design parameter for Selective Laser Melting
Umberto Scipioni Bertoli et al.
MATERIALS & DESIGN (2017)
Comparative Study of Selective Laser Melting and Direct Laser Metal Deposition of Ni3Al Intermetallic Alloy
Dmitry Kotoban et al.
IUTAM SYMPOSIUM ON GROWING SOLIDS, 2015 (2017)
Localized melt-scan strategy for site specific control of grain size and primary dendrite arm spacing in electron beam additive manufacturing
Narendran Raghavan et al.
ACTA MATERIALIA (2017)
Polymers for 3D Printing and Customized Additive Manufacturing
Samuel Clark Ligon et al.
CHEMICAL REVIEWS (2017)
Modeling of additive manufacturing processes for metals: Challenges and opportunities
M. M. Francois et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2017)
Simulation of metal additive manufacturing microstructures using kinetic Monte Carlo
Theron M. Rodgers et al.
COMPUTATIONAL MATERIALS SCIENCE (2017)
Massive nanoprecipitation in an Fe-19Ni-xAl maraging steel triggered by the intrinsic heat treatment during laser metal deposition
Philipp Kuernsteiner et al.
ACTA MATERIALIA (2017)
Prediction of microstructure in laser powder bed fusion process
Ranadip Acharya et al.
ACTA MATERIALIA (2017)
In situ tailoring microstructure in additively manufactured Ti-6Al-4V for superior mechanical performance
W. Xu et al.
ACTA MATERIALIA (2017)
Laser and electron-beam powder-bed additive manufacturing of metallic implants: A review on processes, materials and designs
Swee Leong Sing et al.
JOURNAL OF ORTHOPAEDIC RESEARCH (2016)
Normalised model-based processing diagrams for additive layer manufacture of engineering alloys
Meurig Thomas et al.
ACTA MATERIALIA (2016)
Additive manufacturing of metals
Dirk Herzog et al.
ACTA MATERIALIA (2016)
Epitaxy and Microstructure Evolution in Metal Additive Manufacturing
Amrita Basak et al.
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 46 (2016)
The metallurgy and processing science of metal additive manufacturing
W. J. Sames et al.
INTERNATIONAL MATERIALS REVIEWS (2016)
Precipitation Reactions in Age-Hardenable Alloys During Laser Additive Manufacturing
Eric A. Jaegle et al.
JOM (2016)
Changing the alloy composition of A17075 for better processability by selective laser melting
Maria L. Montero Sistiaga et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Additive manufacturing of Ni-based superalloys: The outstanding issues
Moataz M. Attallah et al.
MRS BULLETIN (2016)
Investigation of crystal growth mechanism during selective laser melting and mechanical property characterization of 316L stainless steel parts
Di Wang et al.
MATERIALS & DESIGN (2016)
Printability of alloys for additive manufacturing
T. Mukherjee et al.
SCIENTIFIC REPORTS (2016)
Anisotropic tensile behavior of Ti-6Al-4V components fabricated with directed energy deposition additive manufacturing
Beth E. Carroll et al.
ACTA MATERIALIA (2015)
Grain morphology evolution behavior of titanium alloy components during laser melting deposition additive manufacturing
T. Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges
W. E. King et al.
APPLIED PHYSICS REVIEWS (2015)
Site specific control of crystallographic grain orientation through electron beam additive manufacturing
R. R. Dehoff et al.
MATERIALS SCIENCE AND TECHNOLOGY (2015)
Spatial variation of melt pool geometry, peak temperature and solidification parameters during laser assisted additive manufacturing process
V. Manvatkar et al.
MATERIALS SCIENCE AND TECHNOLOGY (2015)
Microstructure and mechanical properties of a novel β titanium metallic composite by selective laser melting
B. Vrancken et al.
ACTA MATERIALIA (2014)
Heat transfer and material flow during laser assisted multi-layer additive manufacturing
V. Manvatkar et al.
JOURNAL OF APPLIED PHYSICS (2014)
Metal Additive Manufacturing: A Review
William E. Frazier
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)
Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing
Wayne E. King et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
Compositionally graded metals: A new frontier of additive manufacturing
Douglas C. Hofmann et al.
JOURNAL OF MATERIALS RESEARCH (2014)
Microstructural Characterization of Laser-Deposited Al 4047 Alloy
G. P. Dinda et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)
Balling behavior of stainless steel and nickel powder during selective laser melting process
Ruidi Li et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
Lawrence E. Murr et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2012)
Characterization of interfacial microstructures in 3003 aluminum alloy blocks fabricated by ultrasonic additive manufacturing
R. R. Dehoff et al.
ACTA MATERIALIA (2010)
A study of the micro structural evolution during selective laser melting of Ti-6Al-4V
Lore Thijs et al.
ACTA MATERIALIA (2010)
The Origin of Microstructural Diversity, Texture, and Mechanical Properties in Electron Beam Melted Ti-6Al-4V
S. S. Al-Bermani et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2010)
Balling phenomena in direct laser sintering of stainless steel powder: Metallurgical mechanisms and control methods
Dongdong Gu et al.
MATERIALS & DESIGN (2009)
Effects of process variables and size-scale on solidification microstructure in beam-based fabrication of bulky 3D structures
Srikanth Bontha et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Microstructural evolution in laser-deposited multilayer Ti-M-4V builds: Part I. Microstructural characterization
SM Kelly et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2004)
Microstructural evolution in laser-deposited multilayer Ti-6AI-4V builds: Part II. Thermal modeling
SM Kelly et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2004)
Single-crystal laser deposition of superalloys:: Processing-microstructure maps
M Gäumann et al.
ACTA MATERIALIA (2001)
Columnar to equiaxed transition in solidification processing
W. Kurz et al.
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2001)
分享论文
