相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Anti-phase boundary energy of β series precipitates in Mg-Y-Nd system
Yanlin Guo et al.
SCRIPTA MATERIALIA (2021)
Effects of La and Ce on microstructure and properties of SiC/Al composites
Qiuyuan Liu et al.
CERAMICS INTERNATIONAL (2020)
Elastic properties of long-period stacking ordered phases in Mg-Zn-Y and Mg-Ni-Y alloys: A first-principles study
Yanlin Guo et al.
SCRIPTA MATERIALIA (2020)
Insight into Si poisoning on grain refinement of Al-Si/Al-5Ti-B system
Yang Li et al.
ACTA MATERIALIA (2020)
Influence of orientations biomimetic units processed by laser on wear resistance of 6082 aluminium alloy
Guoping Zhao et al.
OPTICS AND LASER TECHNOLOGY (2020)
Microstructure and mechanical properties of SiCnp/Al6082 aluminum matrix composites prepared by squeeze casting combined with stir casting
Junwen Zhu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)
In-situ observation of grain refinement dynamics of hypoeutectic Al-Si alloy inoculated by Al-Ti-Nb-B alloy
Jin Xu et al.
SCRIPTA MATERIALIA (2020)
Powder metallurgy of Al-based composites reinforced with Fe-based glassy particles: Effect of microstructural modification
Ozge Balci et al.
PARTICULATE SCIENCE AND TECHNOLOGY (2019)
A Review of Advanced Composite and Nanostructured Coatings by Solid-State Cold Spraying Process
Wenya Li et al.
CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES (2019)
The Use of Stirring Methods for the Production of SiC-Reinforced Aluminum Matrix Composite and Validation Via Simulation Studies
Ugur Aybarc et al.
INTERNATIONAL JOURNAL OF METALCASTING (2019)
Enhanced mechanical properties of SiC/Al composites at cryogenic temperatures
Qiuyuan Liu et al.
CERAMICS INTERNATIONAL (2019)
Achievement in grain-refining hypoeutectic Al-Si alloys with Nb
Yang Li et al.
SCRIPTA MATERIALIA (2019)
Effect of reinforcement shape on fracture behaviour of SiC/Al composites with network architecture
Xiang Gao et al.
COMPOSITE STRUCTURES (2019)
Influence mechanisms of Zr and Fe particle additions on the microstructure and mechanical behavior of squeeze-cast 7075Al hybrid composites
Tiwen Lu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Ultrasonic assisted squeeze casting of a wrought aluminum alloy
Gang Chen et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Development of high strength and toughness nano-SiCp/A356 composites with ultrasonic vibration and squeeze casting
Du Yuan et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Air-isolated stir casting of homogeneous Al-SiC composite with no air entrapment and Al4C3
W. Y. Zhang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Development of Al-Nb-B master alloy with high Nb/B ratio for grain refinement of hypoeutectic Al-Si cast alloys
J. Xu et al.
JOURNAL OF MATERIALS SCIENCE (2019)
Effects of magnetic field on the microstructure and mechanical property of Mg-Al-Gd alloys
Qi Cai et al.
MATERIALS CHARACTERIZATION (2019)
Atomic structure and interface chemistry in a high-stiffness and high-strength Al-Si-Mg/TiB2 nanocomposite
Shouxun Ji et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Achieving ultra-high strength and good ductility in AZ61 alloy composites containing hybrid micron SiC and carbon nanotubes reinforcements
M. Y. Zhou et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Microstructure and mechanical behavior of AA6082-T6/SiC/B4C-based aluminum hybrid composites
Gurpreet Singh et al.
PARTICULATE SCIENCE AND TECHNOLOGY (2018)
Effect of SiC and TiC nanoparticle reinforcement on the microstructure, microhardness, and tensile performance of AA6082-T6 friction stir welds
P. N. Karakizis et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Microstructural investigation of Al-Mg/B4C composite deformed at elevated temperature
M. Rezayat et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Development and strengthening mechanisms of bulk ultrafine grained AA6063/SiC composite sheets with varying reinforcement size ranging from nano to micro domain
O. B. Bembalge et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Preparation of Al matrix nanocomposites by diluting the composite granules containing nano-SiCp under ultrasonic vibaration
Shulin Lu et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)
Influence of TiB2 particles on aging behavior of in-situ TiB2/Al-4.5Cu composites
Rui Du et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Nanostructured AA5005/Al2O3 composite manufactured by anodising and accumulative roll bonding
Roohollah Jamaati
MATERIALS SCIENCE AND TECHNOLOGY (2018)
Variation of gamma radiation shielding properties with incident photon energy and penetration depth for WC/Al composites
Shanhua Chen et al.
RADIATION EFFECTS AND DEFECTS IN SOLIDS (2018)
Composite materials parts manufacturing
Juergen Fleischer et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2018)
Stir casting process for manufacture of Al-SiC composites
Shahin Soltani et al.
RARE METALS (2017)
Manufacturing of cast A356 matrix composite reinforced with nano- to micrometer-sized SiC particles
Reza Taherzadeh Mousavian et al.
RARE METALS (2017)
Microstructure and properties of mechanically milled AZ61 powders dispersed with submicron/nanometer Ti particulates
Huan Yu et al.
MATERIALS CHARACTERIZATION (2017)
A review on composite materials and process parameters optimisation for the fused deposition modelling process
N. Mohan et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2017)
Combined effects of reinforcement fraction and porosity on ultrasonic velocity in SiC particulate aluminum alloy matrix composites
N. B. Podymova et al.
COMPOSITES PART B-ENGINEERING (2017)
Reasons for the superior mechanical properties of medium-entropy CrCoNi compared to high-entropy CrMnFeCoNi
G. Laplanche et al.
ACTA MATERIALIA (2017)
EFFECT OF ADDITIONS OF SIC AND AL2O3 PARTICULATES ON THE MICROSTRUCTURE AND TENSILE PROPERTIES OF AL-SI-CU-MG CAST ALLOYS
Jacobo Hernandez-Sandoval et al.
INTERNATIONAL JOURNAL OF METALCASTING (2016)
Microstructure and mechanical properties of Al-nano/micro SiC composites produced by stir casting technique
K. Amouri et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Preparation and characterization of hybrid A359/(SiC+Si3N4) composites synthesized by stir/squeeze casting techniques
Essam A. M. Shalaby et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Effect of grit size on two body abrasive wear of Al 6082 hybrid composites produced by stir casting method
N. Ch. Kaushik et al.
TRIBOLOGY INTERNATIONAL (2016)
Effect of inclusion of SiC particulates on the mechanical resistance behaviour of stir-cast AA6063/SiC composites
I. Balasubramanian et al.
MATERIALS & DESIGN (2015)
Effects of reinforcement surface modification on the microstructures and tensile properties of SiCp/Al2014 composites
Long-Jiang Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Effect of interfacial-active elements addition on the incorporation of micron-sized SiC particles in molten pure aluminum
M. Mohammadpour et al.
CERAMICS INTERNATIONAL (2014)
Combined effects of mechanical vibration and wall thickness on microstructure and mechanical properties of A356 aluminum alloy produced by expendable pattern shell casting
Wenming Jiang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Effects of rare earth elements addition on microstructures, tensile properties and fractography of A357 alloy
Wenming Jiang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy
F. Otto et al.
ACTA MATERIALIA (2013)
Synthesis of A356-MWCNT nanocomposites through a novel two stage casting process
Mehrdad Shayan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Correlation of microstructure with mechanical properties and fracture behavior of A356-T6 aluminum alloy fabricated by expendable pattern shell casting with vacuum and low-pressure, gravity casting and lost foam casting
Wenming Jiang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Hot rolling behaviour of stir-cast Al 6061 and Al 6082 alloys - SiC fine particulates reinforced composites
A. El-Sabbagh et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2012)
Effect of particle size, forging and ageing on the mechanical fatigue characteristics of Al6082/SiCp metal matrix composites
Raja Thimmarayan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2010)
Effect of pressure on microstructures and mechanical properties of Al-Cu-based alloy prepared by squeeze casting
Zhang Ming et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2007)
The wettability of SiC particles by molten aluminium alloy
J Hashim et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)
The enhancement of wettability of SiC particles in cast aluminium matrix composites
J Hashim et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)