相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Garnet Solid Electrolyte for Advanced All-Solid-State Li Batteries
Laiqiang Xu et al.
ADVANCED ENERGY MATERIALS (2021)
Direct Ink Writing of Polymer Composite Electrolytes with Enhanced Thermal Conductivities
Meng Cheng et al.
ADVANCED FUNCTIONAL MATERIALS (2021)
Application of graphene in energy storage device - A review
A. G. Olabi et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)
Design and Manufacture of 3D-Printed Batteries
Zhiyang Lyu et al.
JOULE (2021)
A review of composite polymer-ceramic electrolytes for lithium batteries
Xingwen Yu et al.
ENERGY STORAGE MATERIALS (2021)
Printing Porous Carbon Aerogels for Low Temperature Supercapacitors
Bin Yao et al.
NANO LETTERS (2021)
In situ 3D printing of implantable energy storage devices
Vaishali Krishnadoss et al.
CHEMICAL ENGINEERING JOURNAL (2021)
3D-printed interdigital electrodes for electrochemical energy storage devices
Renpeng Chen et al.
JOURNAL OF MATERIALS RESEARCH (2021)
Biocompatible, High-Performance, Wet-Adhesive, Stretchable All-Hydrogel Supercapacitor Implant Based on PANI@rGO/Mxenes Electrode and Hydrogel Electrolyte
Yang Liu et al.
ADVANCED ENERGY MATERIALS (2021)
A universal strategy towards 3D printable nanomaterial inks for superior cellular high-loading battery electrodes
Xiaocong Tian et al.
JOURNAL OF MATERIALS CHEMISTRY A (2021)
3D-Printed Structure Boosts the Kinetics and Intrinsic Capacitance of Pseudocapacitive Graphene Aerogels
Bin Yao et al.
ADVANCED MATERIALS (2020)
Solid-state shear milling method to prepare PA12/boron nitride thermal conductive composite powders and their selective laser sintering 3D-printing
Lu Yang et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2020)
Multifunctional materials for implantable and wearable photonic healthcare devices
Geon-Hui Lee et al.
NATURE REVIEWS MATERIALS (2020)
A Review of 3D Printing Technologies for Soft Polymer Materials
Lu-Yu Zhou et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
Garnet-Type Solid-State Electrolytes: Materials, Interfaces, and Batteries
Chengwei Wang et al.
CHEMICAL REVIEWS (2020)
Highly-Cyclable Room-Temperature Phosphorene Polymer Electrolyte Composites for Li Metal Batteries
Ramin Rojaee et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
Direct ink writing of surface-modified flax elastomer composites
Yizhou Jiang et al.
COMPOSITES PART B-ENGINEERING (2020)
Direct Ink Writing Technology (3D Printing) of Graphene-Based Ceramic Nanocomposites: A Review
Nestor Washington Solis Pinargote et al.
NANOMATERIALS (2020)
Electrode material-ionic liquid coupling for electrochemical energy storage
Xuehang Wang et al.
NATURE REVIEWS MATERIALS (2020)
Printable highly transparent natural fiber composites
Yizhou Jiang et al.
MATERIALS LETTERS (2020)
Stereolithography Three-Dimensional Printing Solid Polymer Electrolytes for All-Solid-State Lithium Metal Batteries
Yingjie He et al.
NANO LETTERS (2020)
Facile and scalable fabrication of highly thermal conductive polyethylene/graphene nanocomposites by combining solid-state shear milling and FDM 3D-printing aligning methods
Jingjing Jing et al.
CHEMICAL ENGINEERING JOURNAL (2020)
Experimental and Numerical Investigation of the Extrusion and Deposition Process of a Poly(lactic Acid) Strand with Fused Deposition Modeling
Anne Gosset et al.
POLYMERS (2020)
3D Printing of Electrochemical Energy Storage Devices: A Review of Printing Techniques and Electrode/Electrolyte Architectures
Meng Cheng et al.
BATTERIES & SUPERCAPS (2020)
Poly(Ethylene Oxide)-LiTFSI Solid Polymer Electrolyte Filaments for Fused Deposition Modeling Three-Dimensional Printing
Alexis Maurel et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)
3D printing-based cellular microelectrodes for high-performance asymmetric quasi-solid-state micro-pseudocapacitors
Teng Wang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2020)
Metal 3D printing in construction: A review of methods, research, applications, opportunities and challenges
C. Buchanan et al.
ENGINEERING STRUCTURES (2019)
Electrical and Thermal Conductivity of Polylactic Acid (PLA)-Based Biocomposites by Incorporation of Nano-Graphite Fabricated with Fused Deposition Modeling
Rui Guo et al.
POLYMERS (2019)
Review on Polymer-Based Composite Electrolytes for Lithium Batteries
Penghui Yao et al.
FRONTIERS IN CHEMISTRY (2019)
Direct Ink Writing of Wearable Thermoresponsive Supercapacitors with rGO/CNT Composite Electrodes
Yizhou Jiang et al.
ADVANCED MATERIALS TECHNOLOGIES (2019)
3D printing of ceramics: A review
Zhangwei Chen et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)
Efficient 3D Printed Pseudocapacitive Electrodes with Ultrahigh MnO2 Loading
Bin Yao et al.
JOULE (2019)
3D printing of ionic conductors for high-sensitivity wearable sensors
Xiang-Yu Yin et al.
MATERIALS HORIZONS (2019)
3D printed electrochemical energy storage devices
Peng Chang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
Challenges and prospects of 3D micro-supercapacitors for powering the internet of things
Christophe Lethien et al.
ENERGY & ENVIRONMENTAL SCIENCE (2019)
Advanced Energy Storage Devices: Basic Principles, Analytical Methods, and Rational Materials Design
Jilei Liu et al.
ADVANCED SCIENCE (2018)
Combining 3D Printing with Electrospinning for Rapid Response and Enhanced Designability of Hydrogel Actuators
Tingting Chen et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
3D-Printing Electrolytes for Solid-State Batteries
Dennis W. McOwen et al.
ADVANCED MATERIALS (2018)
Towards flexible solid-state supercapacitors for smart and wearable electronics
Deepak P. Dubal et al.
CHEMICAL SOCIETY REVIEWS (2018)
Hybrid electrolytes with 3D bicontinuous ordered ceramic and polymer microchannels for all-solid-state batteries
Stefanie Zekoll et al.
ENERGY & ENVIRONMENTAL SCIENCE (2018)
3D Printing Quasi-Solid-State Asymmetric Micro-Supercapacitors with Ultrahigh Areal Energy Density
Kai Shen et al.
ADVANCED ENERGY MATERIALS (2018)
3D Printing Technologies for Flexible Tactile Sensors toward Wearable Electronics and Electronic Skin
Changyong Liu et al.
POLYMERS (2018)
Safety modelling and testing of lithium-ion batteries in electrified vehicles
Jie Deng et al.
NATURE ENERGY (2018)
Materials for lithium-ion battery safety
Kai Liu et al.
SCIENCE ADVANCES (2018)
A Single Integrated 3D-Printing Process Customizes Elastic and Sustainable Triboelectric Nanogenerators for Wearable Electronics
Shuo Chen et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
Elevated-Temperature 3D Printing of Hybrid Solid-State Electrolyte for Li-Ion Batteries
Meng Cheng et al.
ADVANCED MATERIALS (2018)
3D Printing Fiber Electrodes for an All-Fiber Integrated Electronic Device via Hybridization of an Asymmetric Supercapacitor and a Temperature Sensor
Jingxin Zhao et al.
ADVANCED SCIENCE (2018)
All-printed solid-state substrate-versatile and high-performance micro-supercapacitors for in situ fabricated transferable and wearable energy storage via multi-material 3D printing
Yan Zhang et al.
JOURNAL OF POWER SOURCES (2018)
3D printed separator for the thermal management of high-performance Li metal anodes
Yang Liu et al.
ENERGY STORAGE MATERIALS (2018)
Biodegradable photolithography compatible substrate for transparent transient electronics and flexible energy storage devices
Sankalp Verma et al.
APPLIED MATERIALS TODAY (2018)
Safety issues caused by internal short circuits in lithium-ion batteries
Binghe Liu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
Evaluating Eco-Efficiency of 3D Printing in the Aeronautic Industry
Fares Mami et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2017)
3D Printing of Polymer Nanocomposites via Stereolithography
Jill Z. Manapat et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2017)
Microstructuring of carbon/tin quantum dots via a novel photolithography and pyrolysis-reduction process
Xufeng Hong et al.
NANO RESEARCH (2017)
Additive Biotech-Chances, challenges, and recent applications of additive manufacturing technologies in biotechnology
Felix Krujatz et al.
NEW BIOTECHNOLOGY (2017)
Rheological behavior of Al2O3 suspensions containing polyelectrolyte complexes for direct ink writing
Yuehua Sun et al.
POWDER TECHNOLOGY (2017)
Fabrication of a Highly Aligned Neural Scaffold via a Table Top Stereolithography 3D Printing and Electrospinning
Se-Jun Lee et al.
TISSUE ENGINEERING PART A (2017)
3D Printable Ceramic-Polymer Electrolytes for Flexible High-Performance Li-Ion Batteries with Enhanced Thermal Stability
Aaron J. Blake et al.
ADVANCED ENERGY MATERIALS (2017)
Emerging 3D-Printed Electrochemical Energy Storage Devices: A Critical Review
Xiaocong Tian et al.
ADVANCED ENERGY MATERIALS (2017)
Ror2 signaling regulates Golgi structure and transport through IFT20 for tumor invasiveness
Michiru Nishita et al.
SCIENTIFIC REPORTS (2017)
3D printing trends in building and construction industry: a review
Yi Wei Daniel Tay et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2017)
Flexible, High-Wettability and Fire-Resistant Separators Based on Hydroxyapatite Nanowires for Advanced Lithium-Ion Batteries
Heng Li et al.
ADVANCED MATERIALS (2017)
Hybrid 3D Printing of Soft Electronics
Alexander D. Valentine et al.
ADVANCED MATERIALS (2017)
Fully Packaged Carbon Nanotube Supercapacitors by Direct Ink Writing on Flexible Substrates
Bolin Chen et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
3D printing of polymer matrix composites: A review and prospective
Xin Wang et al.
COMPOSITES PART B-ENGINEERING (2017)
3D Porous Sponge-Inspired Electrode for Stretchable Lithium-Ion Batteries
Wei Liu et al.
ADVANCED MATERIALS (2016)
Graphene Oxide-Based Electrode Inks for 3D-Printed Lithium-Ion Batteries
Kun Fu et al.
ADVANCED MATERIALS (2016)
Energy storage technologies and real life applications - A state of the art review
Mathew Aneke et al.
APPLIED ENERGY (2016)
3D printing of functional biomaterials for tissue engineering
Wei Zhu et al.
CURRENT OPINION IN BIOTECHNOLOGY (2016)
Direct ink writing of special-shaped structures based on TiO2 inks
Ya-yun Li et al.
MODERN PHYSICS LETTERS B (2016)
Development of rapid tooling using fused deposition modeling: a review
Kamaljit Singh Boparai et al.
RAPID PROTOTYPING JOURNAL (2016)
3D Metal Printing Technology
Thomas Duda et al.
IFAC PAPERSONLINE (2016)
Three-Dimensional Printing of High-Content Graphene Scaffolds for Electronic and Biomedical Applications
Adam E. Jakus et al.
ACS NANO (2015)
A review of electrolyte materials and compositions for electrochemical supercapacitors
Cheng Zhong et al.
CHEMICAL SOCIETY REVIEWS (2015)
Enhanced thermal and electrochemical properties of PVDF-HFP/PMMA polymer electrolyte by TiO2 nanoparticles
Dayu Song et al.
SOLID STATE IONICS (2015)
Poly(ethylene oxide)-based electrolytes for lithium-ion batteries
Zhigang Xue et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
TGF-β1 conjugated chitosan collagen hydrogels induce chondrogenic differentiation of human synovium-derived stem cells
Jinku Kim et al.
JOURNAL OF BIOLOGICAL ENGINEERING (2015)
Fused deposition modeling with polypropylene
O. S. Carneiro et al.
MATERIALS & DESIGN (2015)
Optimization of fused deposition modeling process parameters: a review of current research and future prospects
Omar A. Mohamed et al.
ADVANCES IN MANUFACTURING (2015)
High-Performance Lithium-Ion Polymer Cells Assembled with Composite Polymer Electrolytes based on Core-Shell Structured SiO2 Particles Containing Poly(lithium acrylate) in the Shell
Se-Mi Park et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)
Extrusion-based 3D printing of ceramic components
M. Faes et al.
3RD CIRP GLOBAL WEB CONFERENCE - PRODUCTION ENGINEERING RESEARCH ADVANCEMENT BEYOND STATE OF THE ART (CIRPE2014) (2015)
Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers
Joseph T. Muth et al.
ADVANCED MATERIALS (2014)
Fabrication of Sn film via magnetron sputtering towards understanding electrochemical behavior in lithium-ion battery application
Meng Wu et al.
ELECTROCHIMICA ACTA (2014)
Electrochemical energy storage in a sustainable modern society
John B. Goodenough
ENERGY & ENVIRONMENTAL SCIENCE (2014)
Effect of TiO2 nano-filler and EC plasticizer on electrical and thermal properties of poly(ethylene oxide) (PEO) based solid polymer electrolytes
K. Vignarooban et al.
SOLID STATE IONICS (2014)
3D Printing of Interdigitated Li-Ion Microbattery Architectures
Ke Sun et al.
ADVANCED MATERIALS (2013)
Epitaxial growth and lithium ion conductivity of lithium-oxide garnet for an all solid-state battery electrolyte
Sangryun Kim et al.
DALTON TRANSACTIONS (2013)
Digital material fabrication using mask-image-projection-based stereolithography
Chi Zhou et al.
RAPID PROTOTYPING JOURNAL (2013)
3D Printing Disrupts Manufacturing How Economies of One Create New Rules of Competition
Irene J. Petrick et al.
RESEARCH-TECHNOLOGY MANAGEMENT (2013)
Epitaxial Growth of Branched α-Fe2O3/SnO2 Nano-Heterostructures with Improved Lithium-Ion Battery Performance
Weiwei Zhou et al.
ADVANCED FUNCTIONAL MATERIALS (2011)
Electrochemical Energy Storage for Green Grid
Zhenguo Yang et al.
CHEMICAL REVIEWS (2011)
Lithium ion transport and ion-polymer interaction in PEO based polymer electrolyte plasticized with ionic liquid
Yogesh Kumar et al.
SOLID STATE IONICS (2011)
Highly Flexible and All-Solid-State Paper like Polymer Supercapacitors
Chuizhou Meng et al.
NANO LETTERS (2010)
Key challenges in future Li-battery research
J. -M. Tarascon
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2010)
Energy storage devices for future hybrid electric vehicles
Eckhard Karden et al.
JOURNAL OF POWER SOURCES (2007)
Direct ink writing of three-dimensional ceramic structures
Jennifer A. Lewis et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2006)
Thin film lithium ion batteries prepared only by pulsed laser deposition
Naoaki Kuwata et al.
SOLID STATE IONICS (2006)
Materials analysis of stereolithography resins for use in Rapid Manufacturing
R Hague et al.
JOURNAL OF MATERIALS SCIENCE (2004)
Ionic conductivity studies of polymeric electrolytes containing lithium salt with plasticizer
EH Cha et al.
ELECTROCHIMICA ACTA (2004)
Development of a lithium-type advanced energy storage device
A Yoshino et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2004)
Colloidal inks for directed assembly of 3-D periodic structures
JE Smay et al.
LANGMUIR (2002)