☆ 4.5 Article

3D printing of biomedical materials and devices

JOURNAL OF MATERIALS RESEARCH (2021)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Biomedical

Hydroxyapatite reinforced Ti6Al4V composites for load-bearing implants

Jose D. Avila et al.

Summary: In this study, HA reinforced Ti64 composites were prepared using additive manufacturing technology to enhance both biocompatibility and wear resistance. The addition of HA resulted in increased hardness, the formation of a lubricating film, and a significant reduction in wear rates, promoting bone tissue-implant response and enhancing bone surface properties.

ACTA BIOMATERIALIA (2021)

添加到收藏夹

Article Engineering, Biomedical

Biofunctionalization of 3D-printed silicone implants with immunomodulatory hydrogels for controlling the innate immune response: An in vivo model of tracheal defect repair

J. Barthes et al.

Summary: A new cytokine cocktail and hydrogel were designed to control immune responses, promote tissue integration, and increase the survival rate of implants. In vivo experiments demonstrated that implants coated with this hydrogel could reduce inflammatory reactions and significantly improve animal survival rates.

BIOMATERIALS (2021)

添加到收藏夹

Article Materials Science, Biomaterials

3D printed bioactive and antibacterial silicate glass-ceramic scaffold by fused filament fabrication

Adam C. Marsh et al.

Summary: The FFF technique was successfully used to fabricate novel 3D printed silicate bioactive and antibacterial Ag-doped glass-ceramic (Ag-BG) scaffolds. The developed Ag-BG filaments showed promising characteristics for orthopedic applications, with excellent compressive strength and antibacterial effects demonstrated in vitro.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)

添加到收藏夹

Article Engineering, Biomedical

Bioglass incorporated methacrylated collagen bioactive ink for 3D printing of bone tissue

Nilabh S. Kajave et al.

Summary: Bioactive BG-CMA constructs show great potential for advancements in bone tissue engineering by enhancing cell viability, alkaline phosphatase activity, and calcium deposition. Addition of BG particles significantly improves the performance of 3D printed constructs.

BIOMEDICAL MATERIALS (2021)

添加到收藏夹

Article Materials Science, Biomaterials

3D printing of alginate dialdehyde-gelatin (ADA-GEL) hydrogels incorporating phytotherapeutic icariin loaded mesoporous SiO2-CaO nanoparticles for bone tissue engineering

Mahshid Monavari et al.

Summary: 3D printed hydrogel nanocomposites with bioactive glass nanoparticles show enhanced mechanical stiffness, cell adhesion, and drug delivery capability, making them promising for bone tissue engineering applications.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)

添加到收藏夹

Article Pharmacology & Pharmacy

3D printed polymeric drug-eluting implants

Athina Liaskoni et al.

Summary: Extrusion-based 3D printing was used to manufacture sustained drug release PCL implants. Different drug loading formulations were printed without solvents or excipients, and analyzed using SEM, DSC, XRD, ATR-FTIR, and Raman spectroscopy. The implants demonstrated sustained drug release efficiency and the Korsmeyer-Peppas model was suggested as the best fit for drug release profiles. This work highlights the potential of hot-melt extrusion-based 3D printing for customizable drug-eluting implants.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)

添加到收藏夹

Article Engineering, Mechanical

High solid content 45S5 bioglass (R)-based scaffolds using stereolithographic ceramic manufacturing: process, structural and mechanical properties

Zhiyong Ma et al.

Summary: The study utilized the SLCM method to fabricate 45S5 Bioglass-based scaffolds, improving the solid content, reducing linear shrinkage, and enhancing compressive strength through optimization of process parameters.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

3D Printing in alloy design to improve biocompatibility in metallic implants

Indranath Mitra et al.

Summary: 3D printing technology can be used to design metallic alloys for orthopedic and dental applications with improved biocompatibility. This study focused on enhancing the biocompatibility of titanium by combining tantalum chemistry, designed micro-porosity, and nanoscale surface modification.

MATERIALS TODAY (2021)

添加到收藏夹

Article Chemistry, Physical

Tailorable Zinc-Substituted Mesoporous Bioactive Glass/Alginate-Methylcellulose Composite Bioinks

Vera Guduric et al.

Summary: This study synthesized different types of composites containing zinc in mesoporous bioactive glasses (MBG) known for their osteogenic and antimicrobial properties, suitable for bone tissue engineering bioprinting applications, and demonstrated the adaptability of these composites to bone cells.

MATERIALS (2021)

添加到收藏夹

Article Engineering, Biomedical

A 3D-printed PRP-GelMA hydrogel promotes osteochondral regeneration through M2 macrophage polarization in a rabbit model

Guangyao Jiang et al.

Summary: The study investigated the effects of a PRP-GelMA hydrogel scaffold in osteochondral repair in a rabbit model. The scaffold showed optimal effects on BMSCs proliferation, migration, and differentiation, as well as promoting M2 macrophage polarization. Compared to pure GelMA hydrogel, the PRP-GelMA composite demonstrated superior cartilage and subchondral bone regeneration properties, indicating its potential as a candidate for osteochondral tissue engineering.

ACTA BIOMATERIALIA (2021)

添加到收藏夹

Article Biochemistry & Molecular Biology

Silk Fibroin Enhances Cytocompatibilty and Dimensional Stability of Alginate Hydrogels for Light-Based Three-Dimensional Bioprinting

Eunu Kim et al.

Summary: The study synthesized alginate derivatives and silk fibroin to prepare bioinks, enhancing cell compatibility, and pregelated them by ionic cross-linking to increase viscosity for 3D printing. The results showed that the new bioink had improved cytocompatibility compared to traditional bioinks, making it a promising material for tissue engineering.

BIOMACROMOLECULES (2021)

添加到收藏夹

Article Engineering, Manufacturing

Influence of random and designed porosities on 3D printed tricalcium phosphate-bioactive glass scaffolds

Susmita Bose et al.

Summary: This study focuses on utilizing TCP-BG ceramics to fabricate scaffolds with enhanced mechanical and dissolution properties for bone graft applications. The research findings indicate that different porosity structures have a significant impact on the compressive strength and biocompatibility of composite materials.

ADDITIVE MANUFACTURING (2021)

添加到收藏夹

Article Biology

Composite Scaffolds for Bone Tissue Regeneration Based on PCL and Mg-Containing Bioactive Glasses

Mauro Petretta et al.

Summary: In this study, 3D-printed PCL scaffolds reinforced with Mg-doped bioactive glass were developed, showing improved mechanical properties and biological reactivity for bone tissue engineering applications. The composite scaffolds demonstrated high biocompatibility, bioactivity, and cell adhesion, making them promising for promoting cell viability and supporting mechanical loading in trabecular bone.

BIOLOGY-BASEL (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Design and manufacturing of biomimetic porous metal implants

Masud Rana et al.

Summary: The study aims to minimize the stress-shielding effect by using porous materials for implants, with pre-determined stiffness, to promote a more robust implant-bone interface through innovative mechanical loading conditions. The design of interconnected porous metal implants is based on the stiffness variations in bone and the Hounsfield Unit of CT scan data. Finite element analysis compared the performance of porous implants to solid implants, showing that porous implants generate a strain profile at peri-implant bone closer to normal bone.

JOURNAL OF MATERIALS RESEARCH (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

3D printed poly(hydroxybutyrate-co-hydroxyvalerate)-45S5 bioactive glass composite resorbable scaffolds suitable for bone regeneration

Beatriz Araoz et al.

Summary: 3D printing of tissue engineering scaffolds using a combination of PHBV and BG materials allows for the control of infill density to create interconnected pores and channels resembling the extracellular matrix of bone cells. Chemical treatment of BG particles enhances the ductility of the extruded filaments, improving printability. Results demonstrate that scaffolds containing BG particles coated with CTMS exhibit no cytotoxic effects and promote cell spreading, mimicking the mechanical and biological properties of trabecular bone ECM.

JOURNAL OF MATERIALS RESEARCH (2021)

添加到收藏夹

Article Materials Science, Biomaterials

Development, characterization and sterilisation of Nanocellulose-alginate-(hyaluronic acid)- bioinks and 3D bioprinted scaffolds for tissue engineering

M. Lafuente-Merchan et al.

Summary: 3D-bioprinting is a promising technology for tissue engineering with effective control over scaffold fabrication and cell distribution. The use of short cycle autoclave is recommended for sterilizing NC-Alg based cell-free bioinks, and the addition of HA improves the characteristics of the NC-Alg bioink.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)

添加到收藏夹

Article Materials Science, Biomaterials

Upgrading Hepatic Differentiation and Functions on 3D Printed Silk-Decellularized Liver Hybrid Scaffolds

Aarushi Sharma et al.

Summary: The study developed hybrid liver-specific three-dimensional printed scaffolds using solubilized native decellularized liver matrix and silk fibroin, which provided a favorable microenvironment for elevating differentiation and functions of hepatic cells. Different compositions of the scaffolds were studied, with those containing DCL showing increased cell proliferation and upregulated expression of hepatocyte markers.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2021)

添加到收藏夹

Article Materials Science, Biomaterials

Modeling and Fabrication of Silk Fibroin-Gelatin-Based Constructs Using Extrusion-Based Three-Dimensional Bioprinting

Diego Trucco et al.

Summary: Robotic dispensing-based 3D bioprinting is a powerful technology for developing hydrogel-based 3D constructs in regenerative medicine. An analytical model based on hydrogel rheological properties was developed to predict extruded filament width, maximizing printed structure fidelity. Validation of model data and estimation of cell viability during bioprinting process were conducted, indicating the potential for future tissue engineering optimization.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2021)

添加到收藏夹

Article Materials Science, Biomaterials

3D printing of Cu-doped bioactive glass composite scaffolds promotes bone regeneration through activating the HIF-1α and TNF-α pathway of hUVECs

Qiyuan Dai et al.

Summary: This study demonstrated that Cu-BG particles can enhance angiogenesis by activating hUVECs and promote osteogenic differentiation of BMSCs. A 3D-printed scaffold containing Cu-BG showed profound angiogenesis effects in rat bone defect repairs. A hydrogel containing 1 wt% 2Cu-BG effectively regulated the spatiotemporal coupling of vascularization and osteogenesis.

BIOMATERIALS SCIENCE (2021)

添加到收藏夹

Article Materials Science, Biomaterials

Multiscale porosity in mesoporous bioglass 3D-printed scaffolds for bone regeneration

M. Natividad Gomez-Cerezo et al.

Summary: The 3D-printed MBG-PCL composite scaffold with microporosity showed enhanced bone forming ability and mechanical properties due to the multiscale porosity. Microporosity played a crucial role in affecting compressive properties and biological benefits, demonstrating the potential of microporous structure in bioceramic composite constructs.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)

添加到收藏夹

Review Materials Science, Biomaterials

Alginate Based Scaffolds for Cartilage Tissue Engineering: A Review

Maryam Farokhi et al.

INTERNATIONAL JOURNAL OF POLYMERIC MATERIALS AND POLYMERIC BIOMATERIALS (2020)

添加到收藏夹

Article Biochemistry & Molecular Biology

3D bioprinted alginate-gelatin based scaffolds for soft tissue engineering

Dipul Chawla et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

添加到收藏夹

Article Biotechnology & Applied Microbiology

Polymer-Bioactive Glass Composite Filaments for 3D Scaffold Manufacturing by Fused Deposition Modeling: Fabrication and Characterization

Thomas Distler et al.

FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2020)

添加到收藏夹

Review Endocrinology & Metabolism

3D Printing for Bone Regeneration

Amit Bandyopadhyay et al.

CURRENT OSTEOPOROSIS REPORTS (2020)

添加到收藏夹

Article Cell Biology

Blockage of bone morphogenetic protein signalling counteracts hypertrophy in a human osteoarthritic micro-cartilage model

Shikha Chawla et al.

JOURNAL OF CELL SCIENCE (2020)

添加到收藏夹

Review Materials Science, Biomaterials

Bioengineered in Vitro Tissue Models to Study SARS-CoV-2 Pathogenesis and Therapeutic Validation

Juhi Chakraborty et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Cellular Proliferation, Self-Assembly, and Modulation of Signaling Pathways in Silk Fibroin Gelatin-Based 3D Bioprinted Constructs

Juhi Chakraborty et al.

ACS APPLIED BIO MATERIALS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Liposome-Encapsulated Curcumin-Loaded 3D Printed Scaffold for Bone Tissue Engineering

Naboneeta Sarkar et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Clinical significance of three-dimensional printed biomaterials and biomedical devices

Susmita Bose et al.

MRS BULLETIN (2019)

添加到收藏夹

Review Engineering, Biomedical

Review of alginate-based hydrogel bioprinting for application in tissue engineering

Prasansha Rastogi et al.

BIOFABRICATION (2019)

添加到收藏夹

Article Materials Science, Coatings & Films

Mechanical and biological properties of graded porous tantalum coatings deposited on titanium alloy implants by vacuum plasma spraying

Tsung-Yuan Kuo et al.

SURFACE & COATINGS TECHNOLOGY (2019)

添加到收藏夹

Article Materials Science, Biomaterials

3D printing of mesoporous bioactive glass/silk fibroin composite scaffolds for bone tissue engineering

Xiaoyu Du et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)

添加到收藏夹

Article Engineering, Biomedical

3D printing mesoporous bioactive glass/sodium alginate/gelatin sustained release scaffolds for bone repair

Jingwen Wu et al.

JOURNAL OF BIOMATERIALS APPLICATIONS (2019)

添加到收藏夹

Article Materials Science, Biomaterials

Sustained release of vitamin C from PCL coated TCP induces proliferation and differentiation of osteoblast cells and suppresses osteosarcoma cell growth

Susmita Bose et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)

添加到收藏夹

Article Cell Biology

Establishment of in vitro model of corneal scar pathophysiology

Shikha Chawla et al.

JOURNAL OF CELLULAR PHYSIOLOGY (2018)

添加到收藏夹

Article Engineering, Biomedical

Recent Advances in Extrusion-Based 3D Printing for Biomedical Applications

Jesse K. Placone et al.

ADVANCED HEALTHCARE MATERIALS (2018)

添加到收藏夹

Article Engineering, Biomedical

Regulation of fibrotic changes by the synergistic effects of cytokines, dimensionality and matrix: Towards the development of an in vitro human dermal hypertrophic scar model

Shikha Chawla et al.

ACTA BIOMATERIALIA (2018)

添加到收藏夹

Article Engineering, Biomedical

Additively manufactured biodegradable porous magnesium

Y. Li et al.

ACTA BIOMATERIALIA (2018)

添加到收藏夹

Article Engineering, Biomedical

Enhanced In Vivo Bone and Blood Vessel Formation by Iron Oxide and Silica Doped 3D Printed Tricalcium Phosphate Scaffolds

Susmita Bose et al.

ANNALS OF BIOMEDICAL ENGINEERING (2018)

添加到收藏夹

Article Engineering, Biomedical

Silk fibroin-bioactive glass based advanced biomaterials: towards patient-specific bone grafts

Swati Midha et al.

BIOMEDICAL MATERIALS (2018)

添加到收藏夹

Review Materials Science, Multidisciplinary

Additive manufacturing of multi-material structures

Amit Bandyopadhyay et al.

MATERIALS SCIENCE & ENGINEERING R-REPORTS (2018)

添加到收藏夹

Review Materials Science, Multidisciplinary

Additive manufacturing of biomaterials

Susmita Bose et al.

PROGRESS IN MATERIALS SCIENCE (2018)

添加到收藏夹

Review Engineering, Biomedical

Silk-Based Bioinks for 3D Bioprinting

Shikha Chawla et al.

ADVANCED HEALTHCARE MATERIALS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

In Vitro Corrosion Assessment of Additively Manufactured Porous NiTi Structures for Bone Fixation Applications

Hamdy Ibrahim et al.

METALS (2018)

添加到收藏夹

Article Materials Science, Biomaterials

Developmental Biology-Inspired Strategies To Engineer 3D Bioprinted Bone Construct

Shikha Chawla et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2018)

添加到收藏夹

Article Engineering, Biomedical

3D Printing of Calcium Phosphate Ceramics for Bone Tissue Engineering and Drug Delivery

Ryan Trombetta et al.

ANNALS OF BIOMEDICAL ENGINEERING (2017)

添加到收藏夹

Article Engineering, Biomedical

Effect of Chemistry on Osteogenesis and Angiogenesis Towards Bone Tissue Engineering Using 3D Printed Scaffolds

Susmita Bose et al.

ANNALS OF BIOMEDICAL ENGINEERING (2017)

添加到收藏夹

Article Engineering, Biomedical

Effect of an amorphous titania nanotubes coating on the fatigue and corrosion behaviors of the biomedical Ti-6Al-4V and Ti-6Al-7Nb alloys

Leonardo Contri Campanelli et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)

添加到收藏夹

Article Materials Science, Biomaterials

Silver doped resorbable tricalcium phosphate scaffolds for bone graft applications

Sean Hoover et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)

添加到收藏夹

Article Cell & Tissue Engineering

Comparison of 3D-Printed Poly-ε-Caprolactone Scaffolds Functionalized with Tricalcium Phosphate, Hydroxyapatite, Bio-Oss, or Decellularized Bone Matrix

Ethan Nyberg et al.

TISSUE ENGINEERING PART A (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

13-93 bioactive glass/alginate composite scaffolds 3D printed under mild conditions for bone regeneration

Guilin Luo et al.

RSC ADVANCES (2017)

添加到收藏夹

Article Biochemical Research Methods

Designing of PLA scaffolds for bone tissue replacement fabricated by ordinary commercial 3D printer

Ales Gregor et al.

JOURNAL OF BIOLOGICAL ENGINEERING (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Modelling and characterization of a porosity graded lattice structure for additively manufactured biomaterials

Mathieu Dumas et al.

MATERIALS & DESIGN (2017)

添加到收藏夹

Proceedings Paper Engineering, Biomedical

Solvent Based 3D Printing of Biopolymer/Bioactive Glass Composite and Hydrogel for Tissue Engineering Applications

Krishna Kolan et al.

3RD CIRP CONFERENCE ON BIOMANUFACTURING (2017)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Stereolithography: A new method for processing dental ceramics by additive computer-aided manufacturing

Marion Dehurtevent et al.

DENTAL MATERIALS (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Additively Manufactured and Surface Biofunctionalized Porous Nitinol

Z. Gorgin Karaji et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

添加到收藏夹

Article Materials Science, Ceramics

Effect of the particle size and the debinding process on the density of alumina ceramics fabricated by 3D printing based on stereolithography

Haidong Wu et al.

CERAMICS INTERNATIONAL (2016)

添加到收藏夹

Article Materials Science, Ceramics

Characterization of ceramic components fabricated using binder jetting additive manufacturing technology

J. A. Gonzalez et al.

CERAMICS INTERNATIONAL (2016)

添加到收藏夹

Article Materials Science, Biomaterials

Continuous cellularization of calcium phosphate hybrid scaffolds induced by plasma polymer activation

Claudia Bergemann et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)

添加到收藏夹

Article Engineering, Biomedical

Bioplotting of a bioactive alginate dialdehyde-gelatin composite hydrogel containing bioactive glass nanoparticles

Alvaro J. Leite et al.

BIOFABRICATION (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Mesoporous bioactive glass nanolayer-functionalized 3D-printed scaffolds for accelerating osteogenesis and angiogenesis

Yali Zhang et al.

NANOSCALE (2015)

添加到收藏夹

Article Multidisciplinary Sciences

Geometrical versus Random β-TCP Scaffolds: Exploring the Effects on Schwann Cell Growth and Behavior

Lauren Sweet et al.

PLOS ONE (2015)

添加到收藏夹

Article Multidisciplinary Sciences

Toward Smart Implant Synthesis: Bonding Bioceramics of Different Resorbability to Match Bone Growth Rates

Rafael Comesana et al.

SCIENTIFIC REPORTS (2015)

添加到收藏夹

Article Materials Science, Ceramics

Stereolithographic Ceramic Manufacturing of High Strength Bioactive Glass

Robert Gmeiner et al.

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2015)

添加到收藏夹

Article Engineering, Biomedical

Three-dimensional printing of strontium-containing mesoporous bioactive glass scaffolds for bone regeneration

Jianhua Zhang et al.

ACTA BIOMATERIALIA (2014)

添加到收藏夹

Review Materials Science, Multidisciplinary

Additive Manufacturing of Ceramic-Based Materials

Nahum Travitzky et al.

ADVANCED ENGINEERING MATERIALS (2014)

添加到收藏夹

Article Materials Science, Ceramics

Robocasting of 45S5 bioactive glass scaffolds for bone tissue engineering

Siamak Eqtesadi et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2014)

添加到收藏夹

Review Biotechnology & Applied Microbiology

3D bioprinting of tissues and organs

Sean V. Murphy et al.

NATURE BIOTECHNOLOGY (2014)

添加到收藏夹

Article Cell & Tissue Engineering

Microwave-sintered 3D printed tricalcium phosphate scaffolds for bone tissue engineering

Solaiman Tarafder et al.

JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Bone tissue engineering using 3D printing

Susmita Bose et al.

MATERIALS TODAY (2013)

添加到收藏夹

Review Chemistry, Physical

Alginate-Based Biomaterials for Regenerative Medicine Applications

Jinchen Sun et al.

MATERIALS (2013)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Effects of silica and zinc oxide doping on mechanical and biological properties of 3D printed tricalcium phosphate tissue engineering scaffolds

Gary A. Fielding et al.

DENTAL MATERIALS (2012)

添加到收藏夹

Article Materials Science, Ceramics

Sintering of 3D-Printed Glass/HAp Composites

Alexander Winkel et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2012)

添加到收藏夹

Article Engineering, Biomedical

Effect of material, process parameters, and simulated body fluids on mechanical properties of 13-93 bioactive glass porous constructs made by selective laser sintering

Krishna C. R. Kolan et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Processing of 45S5 Bioglass® by lithography-based additive manufacturing

Passakorn Tesavibul et al.

MATERIALS LETTERS (2012)

添加到收藏夹

Review Biotechnology & Applied Microbiology

Recent advances in bone tissue engineering scaffolds

Susmita Bose et al.

TRENDS IN BIOTECHNOLOGY (2012)

添加到收藏夹

Article Engineering, Biomedical

Bone cell-materials interactions and Ni ion release of anodized equiatomic NiTi alloy

Sheldon A. Bernard et al.

ACTA BIOMATERIALIA (2011)

添加到收藏夹

Article Engineering, Biomedical

Three-dimensional printing of hierarchical and tough mesoporous bioactive glass scaffolds with a controllable pore architecture, excellent mechanical strength and mineralization ability

Chengtie Wu et al.

ACTA BIOMATERIALIA (2011)

添加到收藏夹

Article Engineering, Biomedical

Fabrication of 13-93 bioactive glass scaffolds for bone tissue engineering using indirect selective laser sintering

Krishna C. R. Kolan et al.

BIOFABRICATION (2011)

添加到收藏夹

Article Engineering, Biomedical

Understanding the influence of MgO and SrO binary doping on the mechanical and biological properties of β-TCP ceramics

Shashwat S. Banerjee et al.

ACTA BIOMATERIALIA (2010)

添加到收藏夹

Article Engineering, Biomedical

Direct laser processing of a tantalum coating on titanium for bone replacement structures

Vamsi Krishna Balla et al.

ACTA BIOMATERIALIA (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Tantalum-A Bioactive Metal for Implants

Vamsi Krishna Balla et al.

JOM (2010)

添加到收藏夹

Article Materials Science, Ceramics

3D printing of bone substitute implants using calcium phosphate and bioactive glasses

Christian Bergmann et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2010)

添加到收藏夹

Review Materials Science, Multidisciplinary

A review on biodegradable polymeric materials for bone tissue engineering applications

Muhammad Iqbal Sabir et al.

JOURNAL OF MATERIALS SCIENCE (2009)

添加到收藏夹

Article Engineering, Biomedical

Mechanical and in vitro performance of apatite-wollastonite glass ceramic reinforced hydroxyapatite composite fabricated by 3D-printing

J. Suwanprateeb et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2009)

添加到收藏夹

Article Engineering, Biomedical

Laser processing of bioactive tricalcium phosphate coating on titanium for load-bearing implants

Mangal Roy et al.

ACTA BIOMATERIALIA (2008)

添加到收藏夹

Article Engineering, Biomedical

Processing and biocompatibility evaluation of laser processed porous titanium

Weichang Xue et al.

ACTA BIOMATERIALIA (2007)

添加到收藏夹

Article Engineering, Biomedical

Low stiffness porous Ti structures for load-bearing implants

B. Vamsi Krishna et al.

ACTA BIOMATERIALIA (2007)

添加到收藏夹

Article Materials Science, Ceramics

Calcium phosphate-based resorbable ceramics:: Influence of MgO, ZnO, and SiO2 dopants

Amit Bandyopadhyay et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2006)

添加到收藏夹

Article Engineering, Biomedical

45S5 Bioglass®-derived glass-ceramic scaffolds for bone tissue engineering

QZZ Chen et al.

BIOMATERIALS (2006)

添加到收藏夹

Review Engineering, Biomedical

Magnesium and its alloys as orthopedic biomaterials: A review

MP Staiger et al.

BIOMATERIALS (2006)

添加到收藏夹

Article Materials Science, Ceramics

From CT scan to ceramic bone graft

J Darsell et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.