4.5 Article

Multi-principal element grain boundaries: Stabilizing nanocrystalline grains with thick amorphous complexions

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Materials Science, Multidisciplinary

Critical cooling rates for amorphous-to-ordered complexion transitions in Cu-rich nanocrystalline alloys

Charlette M. Grigorian et al.

Summary: In this study, the stability of amorphous complexions in Cu-based alloys was investigated, showing enhanced stability of the amorphous complexion structure in the Cu-Zr-Hf alloy compared to the Cu-Zr alloy. Time-temperature-transformation diagrams were constructed for amorphous-to-ordered complexion transition, revealing a critical cooling rate three orders of magnitude slower in the ternary alloy compared to the binary alloy.

ACTA MATERIALIA (2021)

Article Materials Science, Multidisciplinary

Density-based grain boundary phase diagrams: Application to Fe-Mn-Cr, Fe-Mn-Ni, Fe-Mn-Co, Fe-Cr-Ni and Fe-Cr-Co alloy systems

Lei Wang et al.

Summary: This research utilized a density-based model to calculate multi-component grain boundary phase diagrams and studied the Fe-Mn-Cr, Fe-Mn-Ni, Fe-Mn-Co, Fe-Cr-Ni, and Fe-Cr-Co alloy systems. The study found that despite solute segregation enrichment, a grain boundary may have a lower solubility limit than the bulk, promoting interfacial chemical decomposition.

ACTA MATERIALIA (2021)

Article Materials Science, Multidisciplinary

Reducing hot tearing by grain boundary segregation engineering in additive manufacturing: example of an AlxCoCrFeNi high-entropy alloy

Zhongji Sun et al.

Summary: One major hindrance in alloy design for additive manufacturing (AM) is hot tearing, and a new approach of segregation engineering can effectively prevent hot tearing and achieve systematic additive manufacturing of alloys.

ACTA MATERIALIA (2021)

Article Chemistry, Physical

Segregation engineering in a promising heat-resistant AlCoCrFeMo0.05Ni2 high entropy alloy

Qilu Ye et al.

Summary: Segregation engineering can optimize the microstructure and improve the properties of traditional alloys. In the annealing process of AlCoCrFeMo0.05Ni2 HEA, a large number of metastable phases were formed, leading to significant improvement in high temperature ductility of the alloy.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Nanoscience & Nanotechnology

Tailoring the thermal stability of nanocrystalline Ni alloy by thick grain boundaries

Jie Ding et al.

SCRIPTA MATERIALIA (2020)

Article Multidisciplinary Sciences

Understanding solute effect on grain boundary strength based on atomic size and electronic interaction

Zhifeng Huang et al.

SCIENTIFIC REPORTS (2020)

Article Materials Science, Multidisciplinary

Modeling grain boundary and surface segregation in multicomponent high-entropy alloys

Paul Wynblatt et al.

PHYSICAL REVIEW MATERIALS (2019)

Review Nanoscience & Nanotechnology

High-entropy alloys

Easo P. George et al.

NATURE REVIEWS MATERIALS (2019)

Article Materials Science, Multidisciplinary

Thick amorphous complexion formation and extreme thermal stability in ternary nanocrystalline Cu-Zr-Hf alloys

Charlette M. Grigorian et al.

ACTA MATERIALIA (2019)

Article Multidisciplinary Sciences

Hierarchical nanostructured aluminum alloy with ultrahigh strength and large plasticity

Ge Wu et al.

NATURE COMMUNICATIONS (2019)

Review Materials Science, Multidisciplinary

Solute stabilization of nanocrystalline tungsten against abnormal grain growth

Olivia K. Donaldson et al.

JOURNAL OF MATERIALS RESEARCH (2018)

Article Nanoscience & Nanotechnology

Amorphous complexions enable a new region of high temperature stability in nanocrystalline Ni-W

Jennifer D. Schuler et al.

SCRIPTA MATERIALIA (2018)

Article Materials Science, Multidisciplinary

Solute interaction effects on grain boundary segregation in ternary alloys

Wenting Xing et al.

ACTA MATERIALIA (2018)

Article Nanoscience & Nanotechnology

Preferred nanocrystalline configurations in ternary and multicomponent alloys

Wenting Xing et al.

SCRIPTA MATERIALIA (2017)

Article Nanoscience & Nanotechnology

Calculation and validation of a grain boundary complexion diagram for Bi-doped Ni

Naixie Zhou et al.

SCRIPTA MATERIALIA (2017)

Article Materials Science, Multidisciplinary

Materials selection rules for amorphous complexion formation in binary metallic alloys

Jennifer D. Schuler et al.

ACTA MATERIALIA (2017)

Article Materials Science, Multidisciplinary

Zr alloying effect on the microstructure evolution and plastic deformation of nanostructured Cu thin films

J. T. Zhao et al.

ACTA MATERIALIA (2017)

Article Materials Science, Multidisciplinary

Liquid-like grain boundary complexion and sub-eutectic activated sintering in CuO-doped TiO2

Jiuyuan Nie et al.

ACTA MATERIALIA (2017)

Article Materials Science, Multidisciplinary

An atom probe study on Nb solute partitioning and nanocrystalline grain stabilization in mechanically alloyed Cu-Nb

Monica Kapoor et al.

ACTA MATERIALIA (2017)

Review Materials Science, Multidisciplinary

Grain boundary complexions in multicomponent alloys: Challenges and opportunities

Naixie Zhou et al.

CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2016)

Article Multidisciplinary Sciences

Manipulating the interfacial structure of nanomaterials to achieve a unique combination of strength and ductility

Amirhossein Khalajhedayati et al.

NATURE COMMUNICATIONS (2016)

Article Materials Science, Multidisciplinary

Amorphous intergranular films as toughening structural features

Zhiliang Pan et al.

ACTA MATERIALIA (2015)

Article Materials Science, Multidisciplinary

Phase stability of non-equiatomic CoCrFeMnNi high entropy alloys

Duancheng Ma et al.

ACTA MATERIALIA (2015)

Article Materials Science, Multidisciplinary

Grain boundary complexions

Patrick R. Cantwell et al.

ACTA MATERIALIA (2014)

Review Materials Science, Multidisciplinary

Grain boundary segregation engineering in metallic alloys: A pathway to the design of interfaces

D. Raabe et al.

CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2014)

Article Materials Science, Multidisciplinary

Stability of binary nanocrystalline alloys against grain growth and phase separation

Heather A. Murdoch et al.

ACTA MATERIALIA (2013)

Article Materials Science, Multidisciplinary

Structure and shear deformation of metallic crystalline-amorphous interfaces

C. Brandl et al.

ACTA MATERIALIA (2013)

Article Materials Science, Multidisciplinary

Estimation of grain boundary segregation enthalpy and its role in stable nanocrystalline alloy design

Heather A. Murdoch et al.

JOURNAL OF MATERIALS RESEARCH (2013)

Article Materials Science, Multidisciplinary

Grain boundary wetting in the NdFeB-based hard magnetic alloys

B. B. Straumal et al.

JOURNAL OF MATERIALS SCIENCE (2012)

Article Materials Science, Multidisciplinary

Thermodynamics of grain boundary premelting in alloys. II. Atomistic simulation

P. L. Williams et al.

ACTA MATERIALIA (2009)

Article Materials Science, Multidisciplinary

Thermodynamics of grain boundary premelting in alloys. I. Phase-field modeling

Y. Mishin et al.

ACTA MATERIALIA (2009)

Article Physics, Applied

Grain boundary wetting and prewetting in Ni-doped Mo

Xiaomeng Shi et al.

APPLIED PHYSICS LETTERS (2009)

Article Materials Science, Multidisciplinary

Liquid-like interface complexion: From activated sintering to grain boundary diagrams

Jian Luo

CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2008)

Article Materials Science, Ceramics

Demystifying the role of sintering additives with complexion

Shen J. Dillon et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2008)

Article Nanoscience & Nanotechnology

Solid-state wetting transitions at grain boundaries

Paul Wynblatt et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)

Article Materials Science, Multidisciplinary

Complexion: A new concept for kinetic engineering in materials science

Shen J. Dillon et al.

ACTA MATERIALIA (2007)

Article Materials Science, Multidisciplinary

Thin intergranular films and solid-state activated sintering in nickel-doped tungsten

Vivek K. Gupta et al.

ACTA MATERIALIA (2007)

Article Materials Science, Multidisciplinary

Grain boundary order-disorder transitions

Ming Tang et al.

JOURNAL OF MATERIALS SCIENCE (2006)

Article Physics, Multidisciplinary

Grain boundary transitions in binary alloys

Ming Tang et al.

PHYSICAL REVIEW LETTERS (2006)

Review Nanoscience & Nanotechnology

Intergranular glassy films:: An overview

Anandh Subramaniam et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)

Article Chemistry, Physical

Non-equilibrium grain boundary cosegregation of Mo and P

L Li et al.

APPLIED SURFACE SCIENCE (2006)

Article Materials Science, Multidisciplinary

Diffuse interface model for structural transitions of grain boundaries

M Tang et al.

PHYSICAL REVIEW B (2006)

Article Materials Science, Ceramics

Sintering analysis of undoped and cobalt oxide doped ceria solid solutions

E Jud et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2005)

Article Chemistry, Multidisciplinary

Ductile-to-brittle transition in nanocrystalline metals

HQ Li et al.

ADVANCED MATERIALS (2005)

Article Materials Science, Multidisciplinary

Grain-boundary melting phase transition in the Cu-Bi system

S Divinski et al.

PHYSICAL REVIEW B (2005)

Article Materials Science, Multidisciplinary

Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes

JW Yeh et al.

ADVANCED ENGINEERING MATERIALS (2004)

Article Materials Science, Ceramics

Abnormal grain growth in alumina:: Synergistic effects of yttria and silica

I MacLaren et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2003)

Article Materials Science, Multidisciplinary

Correlation of grain boundary character with wetting behavior

M Takashima et al.

INTERFACE SCIENCE (2000)

Article Materials Science, Multidisciplinary

Stabilization of metallic supercooled liquid and bulk amorphous alloys

A Inoue

ACTA MATERIALIA (2000)