☆ 4.5 Article

Effects of drilling parameters on delamination of kenaf-glass fibre reinforced unsaturated polyester composites

JOURNAL OF INDUSTRIAL TEXTILES (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Textiles

The influence of kenaf contents and stacking sequence on drop-weight impact properties of hybrid laminated composites reinforced polyvinyl butyral composites

Suhad D. Salman

Summary: This study investigates the substitution of aramid fibers with woven kenaf in producing helmet shells. Drop-weight impact tests on different configurations of kenaf and aramid reinforced polyvinyl butyral film were conducted, revealing that hybrid laminates with woven kenaf layers alternating with aramid layers have better energy absorption and impact resistance compared to separate layers of woven kenaf and aramid.

JOURNAL OF INDUSTRIAL TEXTILES (2022)

添加到收藏夹

Article Materials Science, Textiles

Partial replacement of synthetic fibres by natural fibres in hybrid composites and its effect on monotonic properties

Suhad D. Salman

Summary: The study explored the use of jute fibers as substitutes for carbon fibers in composite materials, demonstrating that carbon/jute hybrids exhibit superior dynamic mechanical properties. Placing carbon fibers in the inner layers and jute fibers in the outer layers resulted in reduced performance compared to hybrids with jute in the inner layers. Hybridization with jute fibers increased the damping factor at higher temperatures.

JOURNAL OF INDUSTRIAL TEXTILES (2021)

添加到收藏夹

Article Engineering, Aerospace

Random copolymer membrane coated PBO fibers with significantly improved interfacial adhesion for PBO fibers/cyanate ester composites

Lin TANG et al.

Summary: This study successfully increased the surface roughness of PBO fibers through a modification method, enhancing their interfacial compatibility with resin matrix and improving the single fiber pull-out strength, while maintaining excellent tensile strength. The research provides a strong theoretical basis and technical support for controlling the surface structure and chemistry of inert substrates.

CHINESE JOURNAL OF AERONAUTICS (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Polymer matrix wave-transparent composites: A review

Lin Tang et al.

Summary: With the rapid development of electronic information technology, there is an increasing demand for lightweight, low dielectric constant, and excellent mechanical properties of polymer matrix wave-transparent composites to ensure high-quality electromagnetic wave transmission and protect antenna systems from external interference. The research mainly covers the wave transmission mechanism, key compositions, and testing methods for dielectric properties of wave-transparent composites, presenting future development trends and application prospects.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Composites

Microstructural investigation and hole quality evaluation in S2/FM94 glass-fibre composites under dry and cryogenic conditions

Khaled Giasin et al.

Summary: A new environmentally friendly cryogenic cooling technique was used for drilling S2/FM94 glass fibre reinforced epoxy composite in a liquid nitrogen bath. The study aimed to investigate the effects of drilling parameters and cryogenic cooling on cutting forces, surface roughness, hardness, and delamination factor at hole entry and exit sides. The results showed that spindle speed and cryogenic cooling had the most significant influence on cutting forces and surface roughness, while cryogenic cooling had the most significant influence on increasing hardness and delamination size at the hole entry and exit sides.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2021)

添加到收藏夹

Article Materials Science, Composites

Optimization for drilling process of metal-composite aeronautical structures

Cristiano Devitte et al.

Summary: This study focuses on analyzing the influence of uncoated carbide drills, cutting speeds, and feed rates on delamination factor and thrust force during drilling of metal-composite laminates and joints. The research found that feed rate and drill type were the most significant parameters affecting delamination factor, while feed rate was the most relevant factor for thrust force.

SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS (2021)

添加到收藏夹

Article Engineering, Mechanical

Optimization of drilling process parameters on delamination factor of Jute reinforced unsaturated polyester composite using Box-Behnken design of experiment

Z. Mustafa et al.

JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

Drilling on fiber reinforced polymer/nanopolymer composite laminates: a review

Kishore Kumar Panchagnula et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2018)

添加到收藏夹

Article Materials Science, Paper & Wood

Effects of Processing Method, Moisture Content, and Resin System on Physical and Mechanical Properties of Woven Kenaf Plant Fiber Composites

Mohaiman Jaffar Sharba et al.

BioResources (2016)

添加到收藏夹

Article Thermodynamics

Effect of drilling parameters and tool geometry on drilling performance in drilling carbon fiber-reinforced plastic/titanium alloy stacks

Yingying Wei et al.

ADVANCES IN MECHANICAL ENGINEERING (2016)

添加到收藏夹

Proceedings Paper Engineering, Mechanical

Influence of resin system on the energy absorption capability and morphological properties of plain woven kenaf composites

S. D. Salman et al.

3RD INTERNATIONAL CONFERENCE OF MECHANICAL ENGINEERING RESEARCH (ICMER 2015) (2015)

添加到收藏夹

Proceedings Paper Engineering, Chemical

Influence of machining parameters on delamination in drilling of GFRP-armour steel sandwich composites

M. A. J. Bosco et al.

CHEMICAL, CIVIL AND MECHANICAL ENGINEERING TRACKS OF 3RD NIRMA UNIVERSITY INTERNATIONAL CONFERENCE ON ENGINEERING (NUICONE2012) (2013)

添加到收藏夹

Review Mechanics

A review of mechanical drilling for composite laminates

DeFu Liu et al.

COMPOSITE STRUCTURES (2012)

添加到收藏夹

Article Engineering, Industrial

Drilling of long fiber reinforced thermoplastics-Influence of the cutting edge on the machining results

Vikki Franke

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2011)

添加到收藏夹

Review Computer Science, Artificial Intelligence

Optimization of cutting parameters on delamination based on Taguchi method during drilling of GFRP composite

E. Kilickap

EXPERT SYSTEMS WITH APPLICATIONS (2010)

添加到收藏夹

Article Materials Science, Composites

Investigation into the effect of drilling parameters on delamination in drilling GFRP

Erol Kilickap

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2010)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.