4.7 Article

Mercury/oxygen reaction mechanism over CuFe2O4 catalyst

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Environmental

Charge-distribution modulation of copper ferrite spinel-type catalysts for highly efficient Hg0 oxidation

Yingju Yang et al.

Summary: The study proposed a strategy of charge distribution modulation to design novel catalysts, and successfully developed copper ferrite spinel-type catalysts with superior catalytic performance that can efficiently oxidize Hg-0 over a wide temperature range. The research also revealed the mechanism and key steps of Hg-0 oxidation on copper ferrite.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Thermodynamics

Experimental and theoretical studies on formaldehyde catalytic combustion over Cu-Fe spinel-type catalyst

Junyan Ding et al.

Summary: A series of Cu-Fe spinel-type catalysts were synthesized for HCHO catalytic combustion, and a combined experimental and theoretical investigation was conducted to uncover the reaction process. Cu0.5Fe2.5O4 catalyst showed excellent catalytic performance due to high crystallinity facilitating HCHO adsorption and oxidation. The flexible valences of metal cations in spinel-type catalysts benefited electron transfer for efficient HCHO combustion.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2021)

Article Energy & Fuels

Natural ferruginous manganese ore for efficient immobilization of elemental mercury from coal combustion flue gas

Yang Xu et al.

Summary: This study investigated the use of NFM as a cost-effective sorbent for Hg-0 removal from flue gas, showing that untreated NFM had high efficiency over a broad temperature range, while calcination process might have negative effects on its performance. The research also revealed the Hg-0 removal mechanism and demonstrated the dominance of chemisorption in the process.
Article Engineering, Environmental

Nanosized ZnIn2S4 supported on facet-engineered CeO2 nanorods for efficient gaseous elemental mercury immobilization

Tao Jia et al.

Summary: CeO2/ZnIn2S4 composite material shows excellent adsorption performance towards elemental mercury in a wide temperature range, with higher adsorption capacity and better resistance to sulfur, oxygen, and nitrogen oxidation compared to pure CeO2. Density functional theory calculations and experimental results confirm that the active oxygen and sulfur sites on the surface are the most stable adsorption sites for mercury.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Engineering, Environmental

The adsorption mechanisms of Hg0 on marcasite-type metal selenides: The influences of metal-terminated site

Hailong Li et al.

Summary: This study systematically investigated the immobilization mechanisms of elemental mercury on marcasite-type metal selenides based on density functional theory, finding that the adsorptions of Hg-0 at metal sites are mainly influenced by the 4p orbitals of metal atoms, while interactions at Se sites are affected by both the 5s and 4p orbitals of Se atoms. The influences of metal-terminated sites on Hg-0 adsorptions at Se sites are relatively limited.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Energy & Fuels

SO2 Tolerance and Mechanism of Elemental Mercury Removal from Flue Gas by a Magnetic Recyclable Fe6Mn0.8Ce0.2Oy Sorbent

Qiang Zhou et al.

Summary: The Ce-doped Fe6Mn0.8Ce0.2Oy magnetic sorbent exhibits good SO2 tolerance and can be used for the circulating removal of mercury in high-temperature flue gas. Ce protects Mn4+ active sites from SO2 poisoning, while O-2 helps supplement oxygen vacancies in a timely manner, enhancing the sorbent's tolerance.

ENERGY & FUELS (2021)

Review Energy & Fuels

Mercury Removal from Flue Gas by Noncarbon Sorbents

Jianping Yang et al.

Summary: Mercury emissions from coal-fired power production pose a significant threat to human health and ecosystems, with activated carbons being the most explored sorbents for mercury removal. However, noncarbon sorbents have been developed as supplementary options due to the limitations of activated carbons. This review summarizes the recent progress on noncarbon sorbents for mercury removal and provides guidance for the design and exploration of new adsorbents.

ENERGY & FUELS (2021)

Article Energy & Fuels

Cost-effective sulfurized sorbents derived from one-step pyrolysis of wood and scrap tire for elemental mercury removal from flue gas

Yang Xu et al.

Summary: Sulfurized chars derived from wood and scrap tire pyrolysis were developed as cost-effective sorbents for capturing elemental mercury (Hg-0) from flue gas. The synergistic effect between wood and tire during co-pyrolysis enhanced the Hg-0 capture capability of the sulfurized chars. Chemisorption dominated the Hg-0 removal process, with organic sulfur/elemental sulfur serving as active components for Hg-0 oxidization into HgS.
Article Energy & Fuels

Regeneration Characteristics of Elemental Sulfur-Modified Activated Carbon for Mercury Removal

Cong Chen et al.

Summary: The study demonstrated that thermally renewable sulfur-loading on activated carbon modified with elemental sulfur not only achieved efficient mercury removal, but also showed excellent regeneration characteristics. Under optimal preparation conditions, the adsorbents reached a maximum Hg-0 breakthrough rate of less than 8.58% at 150 degrees Celsius.

ENERGY & FUELS (2021)

Article Energy & Fuels

The influences of selenium species on mercury removal over pyrite surface: A density functional theory study

Wenqi Qu et al.

Summary: This study calculated the co-adsorption of Hg0 and selenium species on pyrite surface using DFT, and found that selenium species play an important role in Hg0 adsorption. The effect of SeO2 on Hg0 adsorption depends on its concentration, with low concentrations producing coordination-absent active sites beneficial for mercury elimination.
Article Engineering, Environmental

Rational design bionic flower-like BiOBr0.5I0.5/WS2 Z-scheme heterojunction for efficient oxidation of Hg0: Synergistic effect of facets exposed and intrinsic defects

Xiaoyan Zhao et al.

Summary: The research on BiOBr0.5I0.5/WS2 photocatalyst indicates that it shows excellent photoactivity under visible light, efficiently removing Hg-0, and possessing high surface area and optimized band structure.

CHEMICAL ENGINEERING JOURNAL (2021)

Review Engineering, Environmental

Bismuth-based photocatalyst for photocatalytic oxidation of flue gas mercury removal: A review

Yu Guan et al.

Summary: Photocatalytic oxidation is a promising technology for addressing industrial flue gas mercury (Hg) pollution. Bi-based photocatalysts have attracted attention due to their unique structures and high performance, offering potential solutions to the issue.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Thermodynamics

Reaction mechanism of elemental mercury oxidation to HgSO4 during SO2/SO3 conversion over V2O5/TiO2 catalyst

Yingju Yang et al.

Summary: Experiments and density functional theory calculations reveal that SO2 promotes Hg-0 oxidation over V2O5/TiO2 catalyst with the assistance of oxygen, depending on reaction temperature and the bimolecular reaction with SO3. SO2 is oxidized to high oxidation ability SO3 for Hg-0 oxidation, forming HgSO4 species.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2021)

Article Engineering, Environmental

Mercury in Dental Amalgam, Online Retail, and the Minamata Convention on Mercury

Alphin Joy et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2020)

Article Thermodynamics

Heterogeneous reaction mechanism of elemental mercury oxidation by oxygen species over MnO2 catalyst

Zhen Wang et al.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2019)

Article Engineering, Environmental

Reaction mechanism for NH3-SCR of NOx over CuMn2O4 catalyst

Yingju Yang et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Review Chemistry, Multidisciplinary

Cu-CHA - a model system for applied selective redox catalysis

Elisa Borfecchia et al.

CHEMICAL SOCIETY REVIEWS (2018)

Review Chemistry, Multidisciplinary

Spinels: Controlled Preparation, Oxygen Reduction/Evolution Reaction Application, and Beyond

Qing Zhao et al.

CHEMICAL REVIEWS (2017)

Article Energy & Fuels

Mercury Oxidation by Halogens under Air- and Oxygen-Fired Conditions

Ignacio Preciado et al.

ENERGY & FUELS (2014)

Article Engineering, Environmental

Regenerable sorbents for mercury capture in simulated coal combustion flue gas

Jorge Rodriguez-Perez et al.

JOURNAL OF HAZARDOUS MATERIALS (2013)

Editorial Material Multidisciplinary Sciences

Global Change and Mercury

David P. Krabbenhoft et al.

SCIENCE (2013)

Review Thermodynamics

Review of technologies for mercury removal from flue gas from cement production processes

Yuanjing Zheng et al.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2012)

Article Energy & Fuels

Gas-Phase Oxidation of Mercury by Bromine and Chlorine in Flue Gas

Brydger Van Otten et al.

ENERGY & FUELS (2011)

Article Thermodynamics

Predicting the impact of SO3 on mercury removal by carbon sorbents

Balaji Krishnakumar et al.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2011)

Article Thermodynamics

Mercury speciation in air-coal and oxy-coal combustion: A modelling approach

M. Gharebaghi et al.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2011)

Article Thermodynamics

Experimental evaluation of the effects of quench rate and quartz surface area on homogeneous mercury oxidation

Andrew Fry et al.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2007)

Article Physics, Condensed Matter

First-principles simulation: ideas, illustrations and the CASTEP code

MD Segall et al.

JOURNAL OF PHYSICS-CONDENSED MATTER (2002)