Sustainable approach on removal of toxic metals from electroplating industrial wastewater using dissolved air flotation

This research paper concentrates on the removal of heavy metal from wastewater which was produced from an electroplating industry. Here, the Dissolved Air Flotation (DAF) treatment process is carried out to remove toxic metals such as chromium, cadmium, nickel, lead, and copper using Sodium Dodecyl Sulfate (SDS) as a collector. The best-optimized conditions for the maximum removal of all the metal ions about 97.39% was achieved at pH 8, contact time of 60 min, surfactant dosage of 0.2 g, and the pressure of 137.89 kPa. At optimized conditions, the treated water consists of 2.71 mg/L of chromium, 1.13 mg/L of cadmium, 10.24 mg/L of nickel, 0.06 mg/L of lead, and 1.14 mg/L of copper. The used surfactant SDS was found as an environmentally friendly compound as prescribed by the Environmental Protection Agency. It is inferred that the flotation kinetics that manifests the rate of recovery and time for all the metal ions follow first-order kinetics. Further, the removal rate constant (k) increases with decreasing the initial metal ion concentration. Overall, the result of this work propounds that the DAF process plays as a promising technique to eliminate noxious pollutants from the wastewater.

Automated summary

This research successfully removed heavy metals from wastewater produced by an electroplating industry using the Dissolved Air Flotation (DAF) treatment process. Under optimized conditions, about 97.39% of metal ions were removed, demonstrating the potential of the DAF process in wastewater treatment.