期刊
JOURNAL OF COMPUTATIONAL AND APPLIED MATHEMATICS
卷 400, 期 -, 页码 -出版社
ELSEVIER
DOI: 10.1016/j.cam.2021.113676
关键词
2D constitutive model of timber; Orthotropic Tsai-Hill failure criterion; Fixed smeared crack model; Traction-separation law; Compact tension test; Single edge notched arch
资金
- Czech Science Foundation [18-05791S]
This paper presents a numerical analysis of the three-point bending test of glued-laminated timber arches with the fibers aligned with the longitudinal direction. The results demonstrate that the model can adequately simulate the quantitative response of the arches, including both linear and non-linear behavior, as well as capturing the most distinctive features of cracking.
This paper describes the numerical analysis of the three-point bending test of glued- laminated timber arches with the fibers aligned with the longitudinal direction. The arches were cut with the vertical notch of 0.5 or 0.25 times the cross-sectional height in the middle of the arch span of 1700 mm or 1830 mm. The 2D homogeneous orthotropic constitutive model of tensile and shear fracture in timber, which has been recently proposed by the authors, was used for the non-linear finite element simulation. The off-axis and the compact tension test results, from the authors' experimental campaign, were used to calibrate the model components. These are (i) orthotropic failure criterion, (ii) crack-type criterion, and (iii) cohesive (traction-separation) law for a crack along or across the grain. The numerical results show that the model can adequately simulate the quantitative response of the arches, including both the linear and non-linear behavior. Furthermore, the model captures well the most distinctive features of the cracking. (C) 2021 Elsevier B.V. All rights reserved.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据