相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Taper corrosion: a complication of total hip arthroplasty
Michael M. Morlock et al.
EFORT OPEN REVIEWS (2020)
Origins of material loss in highly worn acetabular cups of metal-on-metal total hip replacements
Zhen Lu et al.
JOURNAL OF ORTHOPAEDIC RESEARCH (2019)
Five Hundred Fifty-five Retrieved Metal-on-metal Hip Replacements of a Single Design Show a Wide Range of Wear, Surface Features, and Histopathologic Reactions
Sang-Hyun Park et al.
CLINICAL ORTHOPAEDICS AND RELATED RESEARCH (2018)
What Factors Drive Taper Corrosion?
Robin Pourzal et al.
JOURNAL OF ARTHROPLASTY (2018)
Head Taper Corrosion Causing Head Bottoming Out and Consecutive Gross Stem Taper Failure in Total Hip Arthroplasty
Michael M. Morlock et al.
JOURNAL OF ARTHROPLASTY (2018)
Recall of the ASR XL Head and Hip Resurfacing Systems
Werner Maurer-Ertl et al.
ORTHOPEDICS (2017)
Factors Associated With Trunnionosis in the Metal-on-Metal Pinnacle Hip
Harry S. Hothi et al.
JOURNAL OF ARTHROPLASTY (2017)
A large taper mismatch is one of the key factors behind high wear rates and failure at the taper junction of total hip replacements: A finite element wear analysis
Ariyan Ashkanfar et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)
Otto Aufranc Award: Large Heads Do Not Increase Damage at the Head-neck Taper of Metal-on-polyethylene Total Hip Arthroplasties
Georgios K. Triantafyllopoulos et al.
CLINICAL ORTHOPAEDICS AND RELATED RESEARCH (2016)
Comprehensive Analysis of a Recalled Modular Total Hip System and Recommendations for Management
Danyal H. Nawabi et al.
JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME (2016)
Simultaneous measurement of friction and wear in hip simulators
Hani Haider et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE (2016)
The effect of different assembly loads on taper junction fretting wear in total hip replacements
Russell English et al.
TRIBOLOGY INTERNATIONAL (2016)
Trunnionosis in total hip arthroplasty: a review
Jaydev B. Mistry et al.
JOURNAL OF ORTHOPAEDICS AND TRAUMATOLOGY (2016)
The taper disaster - how could it happen?
Michael M. Morlock
HIP INTERNATIONAL (2015)
A novel analytical approach for determining the frictional moments and torques acting on modular femoral components in total hip replacements
H. Farhoudi et al.
JOURNAL OF BIOMECHANICS (2015)
Shorter, rough trunnion surfaces are associated with higher taper wear rates than longer, smooth trunnion surfaces in a contemporary large head metal-on-metal total hip arthroplasty system
Timothy M. Brock et al.
JOURNAL OF ORTHOPAEDIC RESEARCH (2015)
What is the Trouble With Trunnions?
Christina I. Esposito et al.
CLINICAL ORTHOPAEDICS AND RELATED RESEARCH (2014)
Total hip arthroplasty head-neck contact mechanics: A stochastic investigation of key parameters
Finn E. Donaldson et al.
JOURNAL OF BIOMECHANICS (2014)
The Relation Between Titanium Taper Corrosion and Cobalt-Chromium Bearing Wear in Large-Head Metal-on-Metal Total Hip Prostheses A Retrieval Study
F. Witt et al.
JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME (2014)
Accuracy of methods for calculating volumetric wear from coordinate measuring machine data of retrieved metal-on-metal hip joint implants
Zhen Lu et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE (2014)
The Influence of Head Size on Corrosion and Fretting Behaviour at the Head-Neck Interface of Artificial Hip Joints
Richard M. R. Dyrkacz et al.
JOURNAL OF ARTHROPLASTY (2013)
High friction moments in large hard-on-hard hip replacement bearings in conditions of poor lubrication
Nicholas E. Bishop et al.
JOURNAL OF ORTHOPAEDIC RESEARCH (2013)
The influence of contact conditions and micromotions on the fretting behavior of modular titanium alloy taper connections
M. Baxmann et al.
MEDICAL ENGINEERING & PHYSICS (2013)
Corrosion at the Cone/Taper Interface Leads to Failure of Large-diameter Metal-on-metal Total Hip Arthroplasties
Heiko Meyer et al.
CLINICAL ORTHOPAEDICS AND RELATED RESEARCH (2012)
Taper junction failure in large-diameter metal-on-metal bearings
D. J. Langton et al.
BONE & JOINT RESEARCH (2012)
High failure rates with a large-diameter hybrid metal-on-metal total hip replacement CLINICAL, RADIOLOGICAL AND RETRIEVAL ANALYSIS
B. J. R. F. Bolland et al.
JOURNAL OF BONE AND JOINT SURGERY-BRITISH VOLUME (2011)
Accelerating failure rate of the ASR total hip replacement
D. J. Langton et al.
JOURNAL OF BONE AND JOINT SURGERY-BRITISH VOLUME (2011)
The principle of low frictional torque in the Charnley total hip replacement
B. M. Wroblewski et al.
JOURNAL OF BONE AND JOINT SURGERY-BRITISH VOLUME (2009)
Friction moments of large metal-on-metal hip joint bearings and other modern designs
N. E. Bishop et al.
MEDICAL ENGINEERING & PHYSICS (2008)
Metal degradation products - A cause for concern in metal-metal bearings?
JJ Jacobs et al.
CLINICAL ORTHOPAEDICS AND RELATED RESEARCH (2003)
分享论文
