期刊
JOURNAL OF ALLOYS AND COMPOUNDS
卷 888, 期 -, 页码 -出版社
ELSEVIER SCIENCE SA
DOI: 10.1016/j.jallcom.2021.161500
关键词
High entropy alloys; Cantor alloy; Grain boundary engineering; CSL boundaries; Twins; Corrosion behavior
资金
- Deutsche Forschungsgemeinschaft Germany [KA 4631/1-1]
In this study, a grain boundary engineered microstructure was achieved in a Cantor alloy through strain-annealing based thermo-mechanical processing, leading to improved grain boundary characteristics and corrosion resistance.
In the present study, strain-annealing based thermo-mechanical processing was employed to achieve a grain boundary engineered (GBE) microstructure in an equiatomic CoCrFeMnNi high entropy alloy (Cantor alloy) with a single phase, fcc structure. Cast, homogenized and recrystallized strips were cold rolled to 5%, 10% and 15% thickness reductions and annealed at temperatures from 1173 K to 1373 K for 1-6 h duration. Deformation twins were observed following cold rolling to 15%. From the deformed and annealed specimens, GBE microstructure was identified based on coincident site lattice (CSL) (Sigma <= 29) boundary length fraction, number of twins per grain, triple junctions (TJs) character distribution and grain boundary plane orientations. Specimens rolled to 5% and annealed at 1223 K for 1 h exhibited GBE microstructure. The Sigma 3 fraction was enhanced from similar to 44% to similar to 62% in the GBE specimen with concurrent increments in TJs containing at least two CSL boundaries from similar to 20% to similar to 40% compared to as-recrystallized (AR) specimen. Potentiodynamic polarization studies revealed that the GBE specimen exhibited lower corrosion rate in both 0.1 M and 0.6 M NaCl solutions as compared to AR counterpart. The GBE specimen also displayed better passive film resistance due to higher polarization and charge transfer resistance, as evaluated from electrochemical impedance spectroscopy studies. (C) 2021 Elsevier B.V. All rights reserved.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据