相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Understanding tensile and creep properties of WC reinforced nickel-based composites fabricated by selective laser melting
Hongmei Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Modeling strength and failure variability due to porosity in additively manufactured metals
M. Khalil et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2021)
On the macro- and micro-deformation mechanisms of selectively laser melted damage tolerant metallic lattice structures
Guoqing Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Formability improvement, cracking behavior and control of Y- modified Ti-43Al-4Nb-1Mo-0.1B alloys produced by selective laser melting
Piao Gao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Effect of building directions on the surface roughness, microstructure, and tribological properties of selective laser melted Inconel 625
Xingchen Yan et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)
Unveiling damage sites and fracture path in laser powder bed fusion AlSi10Mg: Comparison between horizontal and vertical loading directions
Lv Zhao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Ad Hoc Heat Treatments for Selective Laser Melted Alsi10mg Alloy Aimed at Stress-Relieving and Enhancing Mechanical Performances
J. Fiocchi et al.
JOM (2020)
Microstructure, tensile properties and mechanical anisotropy of selective laser melted 304L stainless steel
Juan Hou et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
Microstructural evolution and EBSD analysis of AlSi10Mg alloy fabricated by selective laser remelting
Jieren Guan et al.
MATERIALS CHARACTERIZATION (2020)
Influence of sub-cell structure on the mechanical properties of AlSi10Mg manufactured by laser powder bed fusion
A. Kempf et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Strong field enhancement in individual Φ-shaped dielectric nanostructures based on anapole mode resonances
Jiepeng Wu et al.
OPTICS EXPRESS (2020)
Effects of the scanning strategy on the microstructure and mechanical properties of a TiAl6V4 alloy produced by electron beam additive manufacturing
Carlo Alberto Biffi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Study on the fatigue behaviour of selective laser melted AlSi10Mg alloy
Srinivasa Rakesh Ch et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Effect of build orientation on the quasi-static and dynamic response of SLM AlSi10Mg
Tobias Maconachie et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
The effect of energy density on texture and mechanical anisotropy in selective laser melted Inconel 718
S. Y. Liu et al.
MATERIALS & DESIGN (2020)
Laser powder bed fusion of AlSi10Mg: Influence of energy intensities on spatter and porosity evolution, microstructure and mechanical properties
Tao Yang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Effect of volumetric energy density on microstructure and tribological properties of FeCoNiCuAl high-entropy alloy produced by laser powder bed fusion
Yaojia Ren et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2020)
High-cycle fatigue and fracture behaviours of SLM AlSi10Mg alloy
S. GLODEZ et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2020)
Heterogeneous microstructure and voids dependence of tensile deformation in a selective laser melted AlSi10Mg alloy
D. D. Ben et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Effects of laser scanning strategies on selective laser melting of pure tungsten
Dongdong Gu et al.
INTERNATIONAL JOURNAL OF EXTREME MANUFACTURING (2020)
A review of selective laser melting of aluminum alloys: Processing, microstructure, property and developing trends
Jinliang Zhang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Orientation dependency for microstructure, geometric accuracy and mechanical properties of selective laser melting AlSi10Mg lattices
Zhichao Dong et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
A comparative study on single-laser and multi-laser selective laser melting AlSi10Mg: defects, microstructure and mechanical properties
Changchun Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Influence of working environment and built orientation on the tensile properties of selective laser melted AlSi10Mg alloy
Srinivasa Ch Rakesh et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Microstructure of selective laser melted AlSi10Mg alloy
Xihe Liu et al.
MATERIALS & DESIGN (2019)
Influence of NbC particles on microstructure and mechanical properties of AlCoCrFeNi high-entropy alloy coatings prepared by laser cladding
Xiaofeng Li et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Influence of re-melting on surface roughness and porosity of AlSi10Mg parts fabricated by selective laser melting
Wenhui Yu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Influence of manufacturing geometric defects on the mechanical properties of AlSi10Mg alloy fabricated by selective laser melting
Panding Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Microstructure, mechanical properties and strengthening mechanisms of AlCu5MnCdVA aluminum alloy fabricated by selective laser melting
Zhiheng Hu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Influence of Si precipitates on fracture mechanisms of AlSi10Mg parts processed by Selective Laser Melting
J. Delahaye et al.
ACTA MATERIALIA (2019)
Effect of build orientation on fracture and tensile behavior of A357 Al alloy processed by Selective Laser Melting
Joao Teixeira Oliveira de Menezes et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Structure-property relationship in high strength and lightweight AlSi10Mg microlattices fabricated by selective laser melting
Tianyu Yu et al.
MATERIALS & DESIGN (2019)
Tensile properties of selective laser melting products affected by building orientation and energy density
Snehashis Pal et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Role of melt pool boundary condition in determining the mechanical properties of selective laser melting AlSi10Mg alloy
Z. H. Xiong et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Study of heat treatment parameters for additively manufactured AlSi10Mg in comparison with corresponding cast alloy
Luca Girelli et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
γ-PGA and MTGase improve the formation of ε-(γ-glutamyl) lysine cross-links within hairtail (Trichiurus haumela) surimi protein
Yaqin Hu et al.
FOOD CHEMISTRY (2018)
Gradient in microstructure and mechanical property of selective laser melted AlSi10Mg
Y. J. Liu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Investigation of effects of process parameters on microstructure and hardness of SLM manufactured SS316L
Wakshum M. Tucho et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Effect of scanning strategy on grain structure and crystallographic texture of Inconel 718 processed by selective laser melting
H. Y. Wan et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)
Microstructure and mechanical properties of Inconel 718 produced by selective laser melting: Sample orientation dependence and effects of post heat treatments
Dunyong Deng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Microstructural characterization of cellular AlSi10Mg alloy fabricated by selective laser melting
Mulin Liu et al.
MATERIALS & DESIGN (2018)
Direction and location dependency of selective laser melted AlSi10Mg specimens
Leonhard Hitzler et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Microstructure and mechanical properties investigation of CP titanium processed by selective laser melting (SLM)
Bartlomiej Wysocki et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Strain rate sensitivity and fracture mechanism of AlSi10Mg parts produced by Selective Laser Melting
I. Rosenthal et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Cyclic plasticity and microstructure of as-built SLM Ti-6Al-4V: The effect of build orientation
Dylan Agius et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Change in microstructure of selectively laser melted AlSi10Mg alloy with heat treatments
Naoki Takata et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Fatigue of AlSi10Mg specimens fabricated by additive manufacturing selective laser melting (AM-SLM)
Naor Elad Uzan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Strength and strain hardening of a selective laser melted AlSi10Mg alloy
B. Chen et al.
SCRIPTA MATERIALIA (2017)
Effect of strut orientation on the microstructure heterogeneities in AlSi10Mg lattices processed by selective laser melting
Pauline Delroisse et al.
SCRIPTA MATERIALIA (2017)
Sandia fracture challenge 2: Sandia California's modeling approach
Kyle N. Karlson et al.
INTERNATIONAL JOURNAL OF FRACTURE (2016)
A high-precision instrument for mapping of rotational errors in rotary stages
Weihe Xu et al.
JOURNAL OF SYNCHROTRON RADIATION (2014)
Strong morphological and crystallographic texture and resulting yield strength anisotropy in selective laser melted tantalum
Lore Thijs et al.
ACTA MATERIALIA (2013)
Consideration of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites: A model for predicting their yield strength
Z Zhang et al.
SCRIPTA MATERIALIA (2006)