4.7 Article

The role of trace Sc and Y in the corrosion resistance of cold drawn Al-0.2Ce based alloys with high electrical conductivity

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Applied

Effect of cerium on microstructure, mechanical properties and corrosion properties of Al-Zn-Mg alloy

Guiyun Hu et al.

Summary: The addition of trace Ce has little effect on the strength of Al-Zn-Mg alloy, but can significantly improve the corrosion resistance. Excessive addition of Ce can decrease the mechanical properties and corrosion resistance of the alloy. Proper amount of Ce addition can significantly enhance the corrosion resistance properties of the alloy.

JOURNAL OF RARE EARTHS (2021)

Article Materials Science, Multidisciplinary

Insight into the localized strain effect on micro-galvanic corrosion behavior in AA7075-T6 aluminum alloy

Ni Li et al.

Summary: The research found that in the AA7075-T6 alloy, there were slight changes in the potential differences between the particles in the elastic deformation stage, while the changes were more significant in the plastic deformation stage, thereby affecting the pitting corrosion resistance of the aluminum alloy.

CORROSION SCIENCE (2021)

Article Electrochemistry

The synergistic effect of cerium acetate and sodium sulphate on corrosion inhibition of AA2024-T3 at various temperatures

Peter Rodic et al.

Summary: The study investigates the synergistic effect between cerium and sulphate ions in the corrosion inhibition of aluminium alloy, showing superior efficiency at lower temperatures. The formed film with the cooperation of cerium and sulphate ions provides enhanced protection against corrosion on the alloy surface.

ELECTROCHIMICA ACTA (2021)

Article Chemistry, Physical

Degradation mechanism of 6063 aluminium matrix composite reinforced with TiC and Al2O3 particles

Min Ao et al.

Summary: The addition of TiC and Al2O3 particles refines the grain structure of the composite material and increases the AlFeSi phase content, but reduces the corrosion resistance of the composite material.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Chemistry, Physical

Investigation on laser beam remelted Al-Cu-Li alloy part II: Corrosion behavior and mechanical properties

Xiaowei Lei et al.

Summary: Aging treatment reduces the corrosion resistance of laser beam remelted 2A97 Al-Cu-Li alloy, while the strength and hardness increase with aging temperature, and the ductility decreases distinctly.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Review Materials Science, Multidisciplinary

Cerium in aluminum alloys

Frank Czerwinski

JOURNAL OF MATERIALS SCIENCE (2020)

Article Materials Science, Multidisciplinary

Microstructure and mechanical properties of novel Al-Y-Sc alloys with high thermal stability and electrical conductivity

A. Pozdniakov et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

Article Chemistry, Physical

Hardening behavior of Al-0.25Sc and Al-0.25Sc-0.12Zr alloys during isothermal annealing

Yuhong Luo et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Article Electrochemistry

Corrosion behavior of AA2024-T6 and AA6065-T6 alloys in reline

Mihael Bucko et al.

ELECTROCHIMICA ACTA (2020)

Article Materials Science, Multidisciplinary

Influence of cerium content on the corrosion behavior of Al-Co-Ce amorphous alloys in 0.6 M NaCl solution

L. M. Zhang et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

Article Chemistry, Physical

Localized corrosion behavior associated with Al7Cu2Fe intermetallic in Al-Zn-Mg-Cu-Zr alloy

Yuanwei Sun et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Article Nanoscience & Nanotechnology

Enhanced corrosion resistance of Mg-Sn-Zn-Al alloy by Y microalloying

Daseul Lee et al.

SCRIPTA MATERIALIA (2019)

Article Materials Science, Multidisciplinary

Thermomechanical treatment and corrosion resistance correlation in the AA2198 Al-Cu-Li alloy

Joao Victor de Sousa Araujo et al.

CORROSION ENGINEERING SCIENCE AND TECHNOLOGY (2019)

Article Materials Science, Multidisciplinary

Enhancement of strength and electrical conductivity for a dilute Al-Sc-Zr alloy via heat treatments and cold drawing

Li Liu et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

Article Electrochemistry

Corrosion and Anodizing Behavior of T1 (Al2CuLi) Precipitates in Al-Cu-Li Alloy

Y. Ma et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

Article Materials Science, Multidisciplinary

Effect of repetitious non-isothermal heat treatment on corrosion behavior of Al-Zn-Mg alloy

Shuai Li et al.

CORROSION SCIENCE (2018)

Article Materials Science, Multidisciplinary

Corrosion Behavior of Nano-/Ultrafine-Grained Al-0.2 wt.% Sc Alloy Produced by Accumulative Roll Bonding (ARB)

Mina Vakili et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)

Article Materials Science, Multidisciplinary

Effect of Y on microstructure and mechanical properties of Al-Mg-Mn-Zr-Sc alloy with low Sc content

R. Yu. Barkov et al.

MATERIALS LETTERS (2018)

Article Materials Science, Multidisciplinary

Assessing the corrosion resistance of binary Al-Sc alloys in chloride-containing environment

F. Rosalbino et al.

MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2017)

Article Nanoscience & Nanotechnology

Development of a high temperature high strength Al alloy by addition of small amounts of Sc and Mg to 2219 alloy

S. Mondol et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

Article Materials Science, Multidisciplinary

Effect of Particles Content on Microstructure, Mechanical Properties, and Electrochemical Behavior of Aluminum-Based Hybrid Composite Processed by Accumulative Roll Bonding Process

Arash Fattah-Alhosseini et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)

Article Materials Science, Multidisciplinary

Role of alloyed Y in improving the corrosion resistance of extruded Mg-Al-Ca-based alloy

Soo-Min Baek et al.

CORROSION SCIENCE (2017)

Review Nanoscience & Nanotechnology

Enhanced strength and electrical conductivity of Al-Mg-Si alloy by thermo-mechanical treatment

Gaoyong Lin et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

Article Materials Science, Multidisciplinary

A localized approach to study the effect of cerium salts as cathodic inhibitor on iron/aluminum galvanic coupling

M. Mouanga et al.

CORROSION SCIENCE (2015)

Article Materials Science, Multidisciplinary

Effects of substituting ytterbium for scandium on corrosion behaviour of Al-Sc alloy

N. Q. Tuan et al.

MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2015)

Article Nanoscience & Nanotechnology

Microstructure and mechanical properties of rare-earth-modified Al-1Fe binary alloys

Z. M. Shi et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)

Article Materials Science, Multidisciplinary

Corrosion mechanism of Al, Al-Zn and Al-Zn-Sn alloys in 3 wt.% NaCl solution

S. Khireche et al.

CORROSION SCIENCE (2014)

Article Materials Science, Multidisciplinary

Inhibitive effect of Ce(III) and La(III) cations for AA2219 aluminium alloy corrosion in sodium chloride medium

G. Venkatasubramanian et al.

MATERIALS CHEMISTRY AND PHYSICS (2014)

Article Metallurgy & Metallurgical Engineering

Characterization of pitting corrosion of 7A60 aluminum alloy by EN and EIS techniques

Xue-hui Wang et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2014)

Article Materials Science, Multidisciplinary

In situ corrosion analysis of Al-Zn-In-Mg-Ti-Ce sacrificial anode alloy

Jingling Ma et al.

MATERIALS CHARACTERIZATION (2012)

Article Engineering, Multidisciplinary

Effect of trace Ce addition on the microstructures and mechanical properties of A356 (AL-7SI-0.35 Mg) aluminum alloys

Yu-Chou Tsai et al.

JOURNAL OF THE CHINESE INSTITUTE OF ENGINEERS (2011)

Article Nanoscience & Nanotechnology

Effect of co-addition of RE, Fe and Mn on the microstructure and performance of A390 alloy

Yunguo Li et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)

Article Nanoscience & Nanotechnology

Microstructure, mechanical properties and corrosion behaviour of dilute Al-Sc-Zr alloy prepared by powder metallurgy

V. Neubert et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)

Article Materials Science, Multidisciplinary

Characterization of dispersed intermetallic phases in an Al-8.32wt%Fe-3.4wt%Ce alloy

LC Zhang et al.

JOURNAL OF MATERIALS SCIENCE (2002)

Article Thermodynamics

Thermodynamic modeling of some aluminium-rare earth binary systems: Al-La, Al-Ce and Al-Nd

G Cacciamani et al.

CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY (2001)