Comparative Analysis of Structure and Properties of Nb-B Inoculated Direct Chill Cast AA4032 Alloy Extruded from As-Cast and Homogenized Conditions

Review Materials Science, Multidisciplinary

Effect of solutes on grain refinement

Z. Fan et al.

Summary: Grain refinement is crucial for enhancing mechanical performance and controlling cast defects in metallic materials. Despite extensive historical research, there are still critical questions unanswered.

PROGRESS IN MATERIALS SCIENCE (2022)

添加到收藏夹

Article Chemistry, Physical

Enhancement of chip breakability of aluminium alloys by controlling the solidification during direct chill casting

Nilam S. Barekar et al.

Summary: The Melt Conditioned Direct-Chill (MC-DC) casting technology enables the production of aluminum billets with uniform microstructure and refinement of secondary phases, leading to improved machinability in downstream processing. This method combines conventional direct chill casting with a high shear device for in situ microstructural control, resulting in fine equiaxed dendritic grains and uniform distribution of second phase particles. The benefits include increased heat extraction rate, larger temperature gradient at the solidification front, and shallower sump, which contribute to the desired microstructural features.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Article Chemistry, Physical

Heterogeneous microstructure and deformation behavior of an automotive grade aluminum alloy

S. S. Dash et al.

Summary: Aluminum alloy is widely used in the automotive industry for its lightweight and high-performance characteristics. This study focused on the microstructure and strain rate effects on the tensile deformation behavior of a high-pressure die-cast Silafont*-36 alloy, revealing unique heterogeneous microstructures and strain hardening behavior.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Article Engineering, Industrial

In-situ microstructural control of A6082 alloy to modify second phase particles by melt conditioned direct chill (MC-DC) casting process - A novel approach

K. M. Sree Manu et al.

Summary: The study introduced a novel strategy to control the formation of noncompact second phase particles in the DC casting of aluminium alloys, achieving a fine-scale dispersion of particles and grain refinement without the deliberate addition of chemical grain refiners. In-situ melt conditioning was used to precisely tailor the as-cast microstructure by maintaining a specific thermal condition in the sump. The MC-DC casting process showed increased production rate potential and reduced the need for homogenisation practices.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Constitutive Behavior of an AA4032 Piston Alloy with Cu and Er Additions upon High-Temperature Compressive Deformation

Suwaree Chankitmunkong et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)

添加到收藏夹

Article Chemistry, Physical

Grain refinement of hypoeutectic Al-7wt.%Si alloy induced by an Al-V-B master alloy

Y. H. Zhang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Structure Modification upon Ultrasonic Processing of an AA4032 Piston Alloy: Comparison of Permanent Mold and Direct-Chill Casting

Suwaree Chankitmunkong et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Insight into Si poisoning on grain refinement of Al-Si/Al-5Ti-B system

Yang Li et al.

ACTA MATERIALIA (2020)

添加到收藏夹

Article Green & Sustainable Science & Technology

Unlocking Sustainability Potentials in Heat Treatment Processes

Stefan Scharf et al.

SUSTAINABILITY (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

The Role of Grain Refiner in the Nucleation of AlFeSi Intermetallic Phases During Solidification of a 6xxx Aluminum Alloy

A. Lui et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2019)

添加到收藏夹

Article Chemistry, Physical

Relationship of Mg2Si morphology with Mg2Si content and its effect on properties of in-situ Mg2Si/Al-Cu composites

Jianyu Li et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Towards industrial Al-Nb-B master alloys for grain refining Al-Si alloys

L. Bolzoni et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Efficacy of Borides in Grain Refining Al-Si Alloys

Leandro Bolzoni et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Formation of equiaxed crystal structures in directionally solidified Al-Si alloys using Nb-based heterogeneous nuclei

Leandro Bolzoni et al.

SCIENTIFIC REPORTS (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Grain refinement of Al-Si alloys by Nb-B inoculation. Part I: Concept development and effect on binary alloys

M. Nowak et al.

MATERIALS & DESIGN (2015)

添加到收藏夹

Article Nanoscience & Nanotechnology

The influence of Mg/Si ratio on the negative natural aging effect in Al-Mg-Si-Cu alloys

G. H. Tao et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)

添加到收藏夹

Article Nanoscience & Nanotechnology

High temperature deformation behavior and optimal hot processing parameters of Al-Si eutectic alloy

H. E. Hu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of Grain-Refiner Addition on the Morphology of Fe-Bearing Intermetallics in a Semi-Solid Processed Al-Mg-Si Alloy

Tahsina Smith et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)

添加到收藏夹

Article Chemistry, Physical

Electron microscopy studies of the age-hardening behaviors in 6005A alloy and microstructural characterizations of precipitates

Wenchao Yang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2012)

添加到收藏夹

Article Nanoscience & Nanotechnology

Continuous cooling precipitation diagrams of Al-Mg-Si alloys

Benjamin Milkereit et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Revised Orowan Strengthening: Effective Interparticle Spacing and Strain Field Considerations

J. B. Ferguson et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2012)

添加到收藏夹

Article Chemistry, Physical

Assessment of the effect of grain refinement on the solidification characteristics of 319 aluminum alloy using thermal analysis

S. G. Shabestari et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2010)

添加到收藏夹

Article Engineering, Industrial

Effects of Fe intermetallics on the machinability of heat-treated Al-(7-11)% Si alloys

Y. Zedan et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Macrosegregation in direct-chill casting of aluminium alloys

R. Nadella et al.

PROGRESS IN MATERIALS SCIENCE (2007)

添加到收藏夹

Article Materials Science, Multidisciplinary

A mechanism for the poisoning effect of silicon on the grain refinement of Al-Si alloys

D. Qiu et al.

ACTA MATERIALIA (2007)

添加到收藏夹

Article Materials Science, Multidisciplinary

The effect of Cu on precipitation in Al-Mg-Si alloys

C. D. Marioara et al.

PHILOSOPHICAL MAGAZINE (2007)

添加到收藏夹

Article Multidisciplinary Sciences

Atomic pillar-based nanoprecipitates strengthen AlMgSi alloys

JH Chen et al.

SCIENCE (2006)

添加到收藏夹

Comparative Analysis of Structure and Properties of Nb-B Inoculated Direct Chill Cast AA4032 Alloy Extruded from As-Cast and Homogenized Conditions

相关参考文献

导出引文

分享论文