相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Enhanced mechanical and electrical properties of in situ synthesized nano-tungsten dispersion-strengthened copper alloy
Tianxing Lu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Study on the microwave sintering of the novel Mo-W-Cu alloys
Hongling Zhou et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Low-temperature densification and microstructure of W-Cu composites with Sn additives
Yuan Li et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)
Characterization of laser-powder interaction and particle transport phenomena during laser direct deposition of W-Cu composite
Guangyuan Wang et al.
ADDITIVE MANUFACTURING (2021)
Fabrication and characterization of W -Ni nanocomposites via a facile chemical co-precipitation route
Qiuyu Chen et al.
ADVANCED POWDER TECHNOLOGY (2021)
Thermal stability and high-temperature mechanical performance of nanostructured W-Cu-Cr-ZrC composite
Lijun Cao et al.
COMPOSITES PART B-ENGINEERING (2021)
In situ synthesis of core-shell W-Cu nanopowders for fabricating full-densified and fine-grained alloys with dramatically improved performance
Xiaojing Li et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Effect of Nano Copper on the Densification of Spark Plasma Sintered W-Cu Composites
Vadde Madhur et al.
NANOMATERIALS (2021)
In-situ synthesis of core-shell structure W(WC) composite grains in W-Cu composites fabricated by infiltration
Qiao Chen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Influence of mechanical faults on electrical resistance in high voltage circuit breaker
Yakui Liu et al.
INTERNATIONAL JOURNAL OF ELECTRICAL POWER & ENERGY SYSTEMS (2021)
A novel approach to fabricate W-Cu functionally graded materials via sedimentation and infiltration method
Bangzheng Wei et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Novel nanocrystalline W-Cu-Cr-ZrC composite with ultra-high hardness
Lijun Cao et al.
NANOTECHNOLOGY (2020)
Improved parallelism of graded W-Cu-SiC materials by adjusting the coefficient of thermal expansion
Chengcheng Zhang et al.
CERAMICS INTERNATIONAL (2020)
Densified W-Cu composite fabricated via laser additive manufacturing
Shuang Su et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2020)
Infiltrated tungsten-copper composite reinforced with short tungsten fibers
Longchao Zhuo et al.
VACUUM (2020)
Preparation and characterization of WMo solid solution nanopowders with a wide composition range
Qiuyu Chen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
The influence of pre-sintering temperature on the microstructure and properties of infiltrated ultrafine-grained tungsten-copper composites
Yiheng Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Ice-templated porous tungsten and tungsten carbide inspired by natural wood
Yuan Zhang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
Tailoring the microstructure and properties of tungsten-copper composites by minor addition of SiC particles for nuclear fusion reactor application
Longchao Zhuo et al.
JOURNAL OF NUCLEAR MATERIALS (2020)
Insight into the Microstructure and Tensile Behavior of the W-Cu Composite Reinforced with Tungsten Fibers and Particulates
Longchao Zhuo et al.
ADVANCED ENGINEERING MATERIALS (2020)
Performance assessment of thick W/Cu graded interlayer for DEMO divertor target
M. Richou et al.
FUSION ENGINEERING AND DESIGN (2020)
Achieving both high conductivity and reliable high strength for W-Cu composite alloys using spherical initial powders
Longchao Zhuo et al.
VACUUM (2020)
Arc erosion behavior of the Al2O3-Cu/(W, Cr) electrical contacts
Xiaohui Zhang et al.
COMPOSITES PART B-ENGINEERING (2019)
Enhanced mechanical and arc erosion resistant properties by homogenously precipitated nanocrystalline fcc-Nb in the hierarchical W-Nb-Cu composite
Longchao Zhuo et al.
COMPOSITES PART B-ENGINEERING (2019)
Selective laser melting of tungsten-copper functionally graded material
Chaolin Tan et al.
MATERIALS LETTERS (2019)
Synthesis and Characterization of Nanoscale Tungsten Particles with Hollow Superstructure Using Spray Drying Combined with Calcination Process
Panchao Zhao et al.
NANOSCALE RESEARCH LETTERS (2019)
Ice-Templated W-Cu Composites with High Anisotropy
Andre Rothlisberger et al.
SCIENTIFIC REPORTS (2019)
Enhanced ductility of W-Mo-Cu alloy through the formation of nanometer-to-micrometer-thick dual-phase transition phase layer
Jin Cao et al.
MATERIALS & DESIGN (2019)
Preparation and properties of ultrafine-grained W-Cu composites reinforced with tungsten fibers
Longchao Zhuo et al.
MATERIALS LETTERS (2019)
Review on nanocomposites fabricated by mechanical alloying
Mohammed A. Taha et al.
INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2019)
Elaborating the Cu-network structured of the W-Cu composites by sintering intermittently electroplated core-shell powders
Jianqiang Li et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Improved model for cathode spot crater in vacuum arc
Xiao Zhang et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2019)
Materials used for sinking EDM electrodes: a review
Tiago Czelusniak et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2019)
Microstructure and properties of ultrafine-grained W-25 wt.%Cu composites doped with CNTs
Qiao Zhang et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
Recent Progress in Sol-Gel Method for Designing and Preparing Metallic and Alloy Nanocrystals
Wang Qingqing et al.
ACTA PHYSICO-CHIMICA SINICA (2019)
Preparation of w-cu nano-composite powders with high copper content using a chemical co-deposition technique
Xiran Wang et al.
ADVANCED POWDER TECHNOLOGY (2018)
Mechanical behavior of Cu-W interface systems upon tensile loading from molecular dynamics simulations
G. C. Ma et al.
COMPUTATIONAL MATERIALS SCIENCE (2018)
Microstructural study on the effect of directional infiltration and Ni activator on tensile strength and conductivity of W-10 wt%Cu composite
M. Ahangarkani et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2018)
Microstructural and texture evolution of copper-(chromium, molybdenum, tungsten) composites deformed by high-pressure-torsion
Julian M. Rosalie et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2018)
Mutual relationship between material removal rate and W-W interfacial features during ultra-high temperature erosion of infiltrated W-10wt.%Cu composite
M. Ahangarkani et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2018)
Citric acid-assisted combustion-nitridation-denitridation synthesis of well-distributed W-Cu nanocomposite powders
Aimin Chu et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2018)
Fabrication and properties of the W-Cu composites reinforced with uncoated and nickel-coated tungsten fibers
Longchao Zhuo et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2018)
A novel approach for fabrication of functionally graded W/Cu composites via microwave processing
Chengshang Zhou et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Fabrication of fine-grained W-Cu composites with high hardness
Baoqiang Li et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Effects of milling time and sintering temperature on structural evolution, densification behavior and properties of a W-20wt.%Cu alloy
Chenguang Li et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
W-Cu functionally graded material: Low temperature fabrication and mechanical characterization
Ali Yusefi et al.
JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2018)
Formation of gradient microstructure and mechanical properties of hot-pressed W-20 wt% Cu composites after sliding friction severe deformation
L. L. Dong et al.
MATERIALS CHARACTERIZATION (2018)
Laser 3D printing of W-Cu composite
Zhenghong Liu et al.
MATERIALS LETTERS (2018)
Microstructural investigation after vacuum electrical breakdown of the W-30wt.%Cu contact material
Qiuyu Chen et al.
VACUUM (2018)
Experimental and theoretical analysis of microstructural evolution and deformation behaviors of CuW composites during equal channel angular pressing
Wenge Chen et al.
MATERIALS & DESIGN (2018)
pH-induced phase evolution and enhanced physical properties of co-precipitated WO3-CuO powders and reduced bodies for microelectronics packaging
Fangzheng Zhen et al.
CERAMICS INTERNATIONAL (2018)
Evaluation method of contact erosion for high voltage SF6 circuit breakers using dynamic contact resistance measurement
Tingting Cheng et al.
ELECTRIC POWER SYSTEMS RESEARCH (2018)
High temperature friction and wear behavior of tungsten - copper alloys
Youting Huang et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2018)
The process of surface carburization and high temperature wear behavior of infiltrated W-Cu composites
Wenge Chen et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Mechanical characterization of electrochemically based W - Cu joints for low-temperature heat sink application
Wolfgang Krauss et al.
FUSION ENGINEERING AND DESIGN (2017)
Microstructural study on ultra-high temperature erosion mechanism of infiltrated W-10 wt%Cu composite
M. Ahangarkani et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2017)
Effect of ball-milling time on structural characteristics and densification behavior of W-Cu composite powder produced from WO3-CuO powder mixtures
Sung-Soo Ryu et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2017)
Infiltration sintering of WCu alloys from copper-coated tungsten composite powders for superior mechanical properties and arc-ablation resistance
Wenge Chen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Rapid consolidation of ultrafine grained W-30 wt.% Cu composites by field assisted sintering from the sol-gel prepared nanopowders
Yajie Guo et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Fabrication and properties of the W-30wt%Cu gradient composite with W@WC core-shell structure
Qiao Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Microstructure and properties characterization of tungsten-copper composite materials doped with graphene
Longlong Dong et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Plasma expansion synthesis of tungsten nanopowder
Trinayan Sarmah et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Fabrication of W/Cu composite coatings by supersonic atmosphere plasma spraying and their anti-ablation performance under oxyacetylene torch
Ling-Jun Guo et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Ultrafine-grained W-25 wt-%Cu composite with superior high-temperature characteristics
Qiao Zhang et al.
MATERIALS SCIENCE AND TECHNOLOGY (2017)
Development of advanced high heat flux and plasma-facing materials
Ch. Linsmeier et al.
NUCLEAR FUSION (2017)
Erosion of nanostructured tungsten by laser ablation, sputtering and arcing
Dogyun Hwangbo et al.
NUCLEAR MATERIALS AND ENERGY (2017)
Assessment of solid state and liquid phase sintering models by comparison of isothermal densification kinetics in W and W-Cu systems
Francis Delannay et al.
ACTA MATERIALIA (2016)
First-principles determination of grain boundary strengthening in tungsten: Dependence on grain boundary structure and metallic radius of solute
Xuebang Wu et al.
ACTA MATERIALIA (2016)
Synthesis of high-purity micro-spherical ruthenium particles by chemical refining method
Jun Bi et al.
ADVANCED POWDER TECHNOLOGY (2016)
A review on the susceptor assisted microwave processing of materials
Madhuchhanda Bhattacharya et al.
ENERGY (2016)
Effect of Zn and Ni added in W-Cu alloy on penetration performance and penetration mechanism of shaped charge liner
Ziying Zhao et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2016)
Preparation of W-Cu alloy with high density and ultrafine grains by mechanical alloying and high pressure sintering
W. T. Qiu et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2016)
The sintering behavior of quasi-spherical tungsten nanopowders
Baoqiang Li et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2016)
Hybrid nanocomposite coating by sol-gel method: a review
Sahar Amiri et al.
IRANIAN POLYMER JOURNAL (2016)
Synthesis of high purity tungsten nanoparticles from tungsten heavy alloy scrap by selective precipitation and reduction route
S. S. Kalyan Kamal et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Effects of Zr alloying on cohesion properties of Cu/W interfaces
Ji Wei Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Evolution mechanism of surface nano-crystallization of tungsten copper alloys
Hongmei Gao et al.
MATERIALS LETTERS (2016)
Ultra-rapid processing of high-hardness tungsten-copper nanocomposites
Walid M. Daoush et al.
SCRIPTA MATERIALIA (2016)
Effect of interface modification by Cu-coated W powders on the microstructure evolution and properties improvement for Cu-W composites
Pingan Chen et al.
SURFACE & COATINGS TECHNOLOGY (2016)
Microstructure, thermal physical property and surface morphology of W-Cu composite fabricated via selective laser melting
Anru Yan et al.
MATERIALS & DESIGN (2016)
Synthesis of nanocrystalline tungsten and tungsten carbide powders in a single step via thermal plasma technique
Ravi K. Enneti
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2015)
Activated liquid phase sintering of W-Cu and Mo-Cu
John L. Johnson
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2015)
Experimental investigations on the synthesis of W-Cu nanocomposite through spark plasma sintering
Ayman Elsayed et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Overview spectra and axial distribution of spectral line intensities in a high-current vacuum arc with CuCr electrodes
M. Lisnyak et al.
JOURNAL OF APPLIED PHYSICS (2015)
Accelerated sintering in phase-separating nanostructured alloys
Mansoo Park et al.
NATURE COMMUNICATIONS (2015)
Three-dimensional characterization of the permeability of W-Cu composites using a new TriBeam technique
McLean P. Echlin et al.
ACTA MATERIALIA (2014)
Nanoscale segregation behavior and high-temperature stability of nanocrystalline W-20 at.% Ti
Tongjai Chookajorn et al.
ACTA MATERIALIA (2014)
Effect of 2,2′-dipyridyl on the plating rate, microstructure and performance of copper-coated tungsten composite powders prepared using electroless plating
Wenshu Chen et al.
APPLIED SURFACE SCIENCE (2014)
Fabrication of W-Cu functionally graded material by spark plasma sintering method
Xiaoqiao Tang et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2014)
Enhanced liquid-phase sintering of W-Cu composites by liquid infiltration
Hafed Ibrahim et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2014)
Low-temperature densification and excellent thermal properties of W-Cu thermal-management composites prepared from copper-coated tungsten powders
Lianmeng Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Influences of temperatures on tungsten copper alloy prepared by microwave sintering
Lei Xu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Influence of copper content on the property of Cu-W alloy prepared by microwave vacuum infiltration sintering
Lei Xu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Study on improving self-sharpening capacity of W-Cu-Zn alloy by the pressureless infiltration method
Xiaoliang Fang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Preparation of copper coated tungsten powders by intermittent electrodeposition
Jiudong Xu et al.
POWDER TECHNOLOGY (2014)
Effects of Zr addition on properties and vacuum arc characteristics of Cu-W alloy
Xiaohong Yang et al.
VACUUM (2014)
Interface structure and work function of W-Cu interfaces
C. P. Liang et al.
APPLIED PHYSICS LETTERS (2013)
The mechanical properties of W-Cu composite by activated sintering
Pingan Chen et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2013)
A spray-drying strategy for synthesis of nanoscale metal-organic frameworks and their assembly into hollow superstructures
Arnau Carne-Sanchez et al.
NATURE CHEMISTRY (2013)
The effect of additive and sintering mechanism on the microstructural characteristics of W-40Cu composites
M. Ahangarkani et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2012)
Single-step pathway for the synthesis of tungsten nanosized powders by RF induction thermal plasma
Haibao Zhang et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2012)
Synthesis of ultrafine/nanocrystalline W-(30-50)Cu composite powders and microstructure characteristics of the sintered alloys
Jinglian Fan et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2012)
Effects of processing parameters of tungsten-copper composites
A. Abu-Oqail et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2012)
Investigation on the characteristics of micro- and nano-structured W-15 wt.%Cu composites prepared by powder metallurgy route
H. Abbaszadeh et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2012)
Effects of Zn additions on the solid-state sintering of W-Cu composites
Pingan Chen et al.
MATERIALS & DESIGN (2012)
Microstructure and thermostability of a W-Cu nanocomposite produced via high-pressure torsion
D. Edwards et al.
PHILOSOPHICAL MAGAZINE (2012)
Design of Stable Nanocrystalline Alloys
Tongjai Chookajorn et al.
SCIENCE (2012)
Fabrication of Electronic Packaging Grade Cu-W Materials by High-Temperature and High-Velocity Compaction
Guosheng Jiang et al.
IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY (2012)
Automatic Multishot Operation of an Electromagnetic Launcher
Michael J. Veracka et al.
IEEE TRANSACTIONS ON PLASMA SCIENCE (2011)
Effect of Fe on vacuum breakdown properties of CuW alloys
Cao Weichan et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2011)
Tungsten-copper composite production by activated sintering and infiltration
A. Ghaderi Hamidi et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2011)
100 years of doped tungsten wire
P. Schade
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2010)
Effect of WC and CeO2 on microstructure and properties of W-Cu electrical contact material
Xiaohong Yang et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2010)
Fabrication of W-Cu composites by microwave infiltration
Yingli Guo et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
Synthesis of tungsten nanoparticles by solvothermal decomposition of tungsten hexacarbonyl
Prasanta Kumar Sahoo et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2009)
Evaluation of microstructure and contiguity of W/Cu composites prepared by coated tungsten powders
M. Amirjan et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2009)
Microwave sintering W-Cu composites: Analyses of densification and microstructural homogenization
Shu-dong Luo et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
An experimental investigation on the W-Cu composites
A. Ibrahim et al.
MATERIALS & DESIGN (2009)
Research on the densification of W-40 wt.%Cu by liquid sintering and hot-hydrostatic extrusion
Daren Li et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2008)
Solid state and liquid phase sintering of mechanically activated W-20 wt.% Cu powder mixture
M. H. Maneshian et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2008)
Fabrication and characterization of W-15Cu composite powders by a novel mechano-chemical process
Jigui Cheng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Synthesis and characterization of W-Cu nanocomposites developed by mechanical alloying
Syed Nasimul Alam
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
The behavior of tungsten oxides in the presence of copper during hydrogen reduction
Gil-Su Kim et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2006)
Evaluation of conductivity in W-Cu composites through the estimation of topological microstructures
YJ Lee et al.
MATERIALS LETTERS (2006)
Freezing as a path to build complex composites
S Deville et al.
SCIENCE (2006)
Effects of tungsten particle size and copper content on densification of liquid-phase-sintered W-Cu
JL Johnson et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2005)
Formation of a W-25%Cu nanocomposite during high pressure torsion
I Sabirov et al.
SCRIPTA MATERIALIA (2005)
Alloys created between immiscible elements
E Ma
PROGRESS IN MATERIALS SCIENCE (2005)
Preparation of W-Cu nanocomposite powder by hydrogen-reduction of ball-milled W and CuO powder mixture
DG Kim et al.
MATERIALS LETTERS (2004)
Effect of heating rate on microstructural homogeneity of sintered W-15wt%Cu nanocomposite fabricated from W-CuO powder mixture
DG Kim et al.
SCRIPTA MATERIALIA (2004)
Glass-forming ability determined by an n-body potential in a highly immiscible Cu-W system through molecular dynamics simulations -: art. no. 144201
HR Gong et al.
PHYSICAL REVIEW B (2003)
The influence of the dispersion technique on the characteristics of the W-Cu powders and on the sintering behavior
FA da Costa et al.
POWDER TECHNOLOGY (2003)
Segregation of Fe during the sintering of doped W-Cu Alloys
F Doré et al.
SCRIPTA MATERIALIA (2003)
Dilatometric analysis on the sintering behavior of nanocrystalline W-Cu prepared by mechanical alloying
SS Ryu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2002)
Correlation between cathode properties, burning voltage, and plasma parameters of vacuum arcs
A Anders et al.
JOURNAL OF APPLIED PHYSICS (2001)
Activated sintering of nickel-doped tungsten: Approach by grain boundary structural transition
NM Hwang et al.
SCRIPTA MATERIALIA (2000)