相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。A control approach to scheduling flexibly configurable jobs with dynamic structural-logical constraints
Dmitry Ivanov et al.
IISE TRANSACTIONS (2021)
Reconfigurable manufacturing systems from an optimisation perspective: a focused review of literature
Abdelkrim R. Yelles-Chaouche et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2021)
Learning to schedule job-shop problems: representation and policy learning using graph neural network and reinforcement learning
Junyoung Park et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2021)
Self-organizing manufacturing network: A paradigm towards smart manufacturing in mass personalization
Zhaojun Qin et al.
JOURNAL OF MANUFACTURING SYSTEMS (2021)
Design of reconfigurable machining lines: A novel comprehensive optimisation method
Olga Battaia et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2021)
Joint decision-making of production and maintenance in mixed model assembly systems with delayed differentiation configurations
Weihong Guo et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2020)
Optimal cost design of flow lines with reconfigurable machines for batch production
Olga Battaia et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2020)
An Optimization Model and Solution Algorithms for the Vehicle Routing Problem With a Factory-in-a-Box
Junayed Pasha et al.
IEEE ACCESS (2020)
Scheduling in production, supply chain and Industry 4.0 systems by optimal control: fundamentals, state-of-the-art and applications
Alexandre Dolgui et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2019)
Digital twin-driven rapid individualised designing of automated flow-shop manufacturing system
Qiang Liu et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2019)
Scheduling in cloud manufacturing: state-of-the-art and research challenges
Yongkui Liu et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2019)
Digital twin-driven product design framework
Fei Tao et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2019)
Two-level multi-task scheduling in a cloud manufacturing environment
Feng Li et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2019)
A survey on knowledge transfer for manufacturing data analytics
Seung Hwan Bang et al.
COMPUTERS IN INDUSTRY (2019)
Smart, connected open architecture product: an IT-driven co-creation paradigm with lifecycle personalization concerns
Pai Zheng et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2019)
Distributed manufacturing resource selection strategy in cloud manufacturing
Lei Wang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Choosing the system configuration for high-volume manufacturing
Yoram Koren et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2018)
The evolution of production systems from Industry 2.0 through Industry 4.0
Yong Yin et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2018)
Smart manufacturing
Andrew Kusiak
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2018)
Statistical transfer learning: A review and some extensions to statistical process control
Fugee Tsung et al.
QUALITY ENGINEERING (2018)
Real-time teaming of multiple reconfigurable manufacturing systems
Xingyu Li et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2018)
Product features characterization and customers(,) preferences prediction based on purchasing data
Jian Zhang et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2018)
Mapping customer needs to design parameters in the front end of product design by applying deep learning
Yue Wang et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2018)
Evaluation across and within collaborative manufacturing networks: a comparison of manufacturers' interactions and attributes
Jiewu Leng et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2018)
Deep learning for smart manufacturing: Methods and applications
Jinjiang Wang et al.
JOURNAL OF MANUFACTURING SYSTEMS (2018)
A graph-based cost model for supply chain reconfiguration
Weihong Guo et al.
JOURNAL OF MANUFACTURING SYSTEMS (2018)
Reconfigurable manufacturing systems: Principles, design, and future trends
Yoram Koren et al.
FRONTIERS OF MECHANICAL ENGINEERING (2018)
Advanced manufacturing systems: socialization characteristics and trends
F. Tao et al.
JOURNAL OF INTELLIGENT MANUFACTURING (2017)
The impact of maintainability on the manufacturing system architecture
Xi Gu
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2017)
Pollux: a dynamic hybrid control architecture for flexible job shop systems
Jose-Fernando Jimenez et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2017)
Decision support for design of reconfigurable rotary machining systems for family part production
Olga Battaia et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2017)
Flexible job-shop scheduling/rescheduling in dynamic environment: a hybrid MAS/ACO approach
Sicheng Zhang et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2017)
Value creation through design for scalability of reconfigurable manufacturing systems
Yoram Koren et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2017)
Alternative production strategies based on the comparison of additive and traditional manufacturing technologies
Charisios Achillas et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2017)
Estimation of active maintenance opportunity windows in Bernoulli production lines
Xi Gu et al.
JOURNAL OF MANUFACTURING SYSTEMS (2017)
Reconfiguration-oriented opportunistic maintenance policy for reconfigurable manufacturing systems
Tangbin Xia et al.
RELIABILITY ENGINEERING & SYSTEM SAFETY (2017)
A system framework for OKP product planning in a cloud-based design environment
Pai Zheng et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2017)
Strategies to realize decentralized manufacture through hybrid manufacturing platforms
Blake A. Kendrick et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2017)
Product personalization enabled by assembly architecture and cyber physical systems
Changbai Tan et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2017)
Systematic Consideration of Value Chains with Respect to the Timing of Individualization
Eva Bogner et al.
COMPLEX SYSTEMS ENGINEERING AND DEVELOPMENT (2017)
In Pursuit of Personalization Design
Kazuki Kaneko et al.
24TH CIRP CONFERENCE ON LIFE CYCLE ENGINEERING (2017)
A dynamic model and an algorithm for short-term supply chain scheduling in the smart factory industry 4.0
Dmitry Ivanov et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2016)
Resource sharing in cyber-physical systems: modelling framework and case studies
Ashutosh Nayak et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2016)
Schedule robustness analysis with the help of attainable sets in continuous flow problem under capacity disruptions
Dmitry Ivanov et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2016)
Social manufacturing as a sustainable paradigm for mass individualization
Pingyu Jiang et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2016)
Cloud-based design and manufacturing: A new paradigm in digital manufacturing and design innovation
Dazhong Wu et al.
COMPUTER-AIDED DESIGN (2015)
Scheduling to minimize the makespan in large-piece one-of-a-kind production with machine availability constraints
Wenyou Jia et al.
EXPERT SYSTEMS WITH APPLICATIONS (2015)
Simulation of matrix-structured manufacturing systems
Malte Schoenemann et al.
JOURNAL OF MANUFACTURING SYSTEMS (2015)
Product Design for Mass-Individualization
Y. Koren et al.
CIRP 25TH DESIGN CONFERENCE INNOVATIVE PRODUCT CREATION (2015)
Open-architecture products
Y. Koren et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2013)
Product variety management
H. ElMaraghy et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2013)
Genetic algorithm for balancing reconfigurable machining lines
Pavel A. Borisovsky et al.
COMPUTERS & INDUSTRIAL ENGINEERING (2013)
The rapid responsiveness of RMS
Yoram Koren
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2013)
Product architecting for personalization
Christopher Berry et al.
JOURNAL OF MANUFACTURING SYSTEMS (2013)
From cloud computing to cloud manufacturing
Xun Xu
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2012)
An efficient heuristic for adaptive production scheduling and control in one-of-a-kind production
Wei Li et al.
COMPUTERS & OPERATIONS RESEARCH (2011)
A heuristic for adaptive production scheduling and control in flow shop production
Wei Li et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2011)
Design for mass personalization
M. M. Tseng et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2010)
Design of reconfigurable manufacturing systems
Yoram Koren et al.
JOURNAL OF MANUFACTURING SYSTEMS (2010)
An information system for one-of-a-kind production
P. R. Dean et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2009)
Operation management in reconfigurable manufacturing systems: Reconfiguration for error handling
M Bruccoleri et al.
INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS (2006)
Flexible flow shop scheduling: optimum, heuristics and artificial intelligence solutions
H Wang
EXPERT SYSTEMS (2005)
A framework for evaluating production policies to improve customer responsiveness
S Kurnaz et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2005)
Present and future of flexible automation: Towards new paradigms
F Jovane et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2003)