相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Effect of rotationally accelerated shot peening on the microstructure and mechanical behavior of a metastable β titanium alloy
Xinkai Ma et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
High impact resistance of a TWIP β titanium alloy: linking the multi-scale deformation and fracture mechanisms
Chloe Varenne et al.
JOURNAL OF MATERIALS SCIENCE (2021)
In-situ investigation on tensile deformation and fracture behaviors of a new metastable β titanium alloy
Jing Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Stress-induced martensitic transformation in a β-solution treated Ti-10V-2Fe-3Al alloy during compressive deformation
Xinkai Ma et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Revisiting the martensite/ferrite interface damage initiation mechanism: The key role of substructure boundary sliding
L. Liu et al.
ACTA MATERIALIA (2021)
Interstitial effects on the incipient plasticity and dislocation behavior of a metastable high-entropy alloy: Nanoindentation experiments and statistical modeling
Kefu Gan et al.
ACTA MATERIALIA (2021)
Crystallography and elastic anisotropy in fatigue crack nucleation at nickel alloy twin boundaries
Xiaoxian Zhang et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2021)
Insight into microstructure-sensitive elastic strain concentrations from integrated computational modeling and digital image correlation
Marat Latypov et al.
SCRIPTA MATERIALIA (2021)
Accommodation mechanisms in strain-transformable titanium alloys
Y. Danard et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Low cycle fatigue behavior and deformation mechanism of different microstructures in Ti-5Al-5Mo-5V-3Cr alloy
Mainak Sen et al.
INTERNATIONAL JOURNAL OF FATIGUE (2021)
Martensite formation in titanium alloys: Crystallographic and compositional effects
Madeleine Bignon et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
An in-situ neutron diffraction investigation of martensitic transformation in a metastable β Ti-10V-2Fe-3Al alloy during uniaxial tension
Carla Isabel Pinilla Ducreux et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Revealing the intrinsic nanohardness of retained austenite grain in a medium Mn steel with heterogeneous structure
B. B. He et al.
MATERIALS CHARACTERIZATION (2021)
ω precipitation: Deformation regulator in metastable titanium alloys
J. F. Xiao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
The role of nano-scaled structural non-uniformities on deformation twinning and stress-induced transformation in a cold rolled multifunctional β-titanium alloy
Qianglong Liang et al.
SCRIPTA MATERIALIA (2020)
Abnormal TRIP effect on the work hardening behavior of a quenching and partitioning steel at high strain rate
M. Wang et al.
ACTA MATERIALIA (2020)
Dislocation Emission and Crack Dislocation Interactions
Chandra S. Pande et al.
METALS (2020)
Testing and analysis of solid polymers under large monotonic and long-term cyclic deformation
Thierry Barriere et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Elasto-viscoplastic tensile behavior of as-forged Ti-1023 alloy: Experiments and micromechanical modeling
Safaa Lhadi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Low cycle fatigue crack initiation in Ti-5Al-5Mo-5V-3Cr in relation to local crystallographic orientations
A. Helstroffer et al.
MATERIALS LETTERS (2020)
Evolution of twinning systems and variants during sequential twinning in cryo-rolled titanium
Z. W. Huang et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
Hot deformation behavior originated from dislocation activity and β to α phase transformation in a metastable β titanium alloy
Ke Hua et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
In-situ observation of the tensile deformation and fracture behaviour of powder-consolidated and as-cast metastable beta titanium alloys
Qinyang Zhao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
The dynamic response of the metastable β titanium alloy Ti-2Al-9.2Mo-2Fe at ambient temperature
J. F. Xiao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Achieving Gradient Martensite Structure and Enhanced Mechanical Properties in a Metastable β Titanium Alloy
Xinkai Ma et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2019)
Boundary micro-cracking in metastable Fe45Mn35Co10Cr10 high-entropy alloys
Shaolou Wei et al.
ACTA MATERIALIA (2019)
A compact constitutive model to describe the viscoelastic-plastic behaviour of glassy polymers: Comparison with monotonic and cyclic experiments and state-of-the-art models
T. Barriere et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
Effect of reverse β-to-ω transformation on twinning and martensitic transformation in a metastable β titanium alloy
J. F. Xiao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Probing the phase transformation and dislocation evolution in dual-phase high-entropy alloys
Qihong Fang et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
Interfacial-dislocation-controlled deformation and fracture in nanolayered composites: Toward higher ductility of drawn pearlite
Tomotsugu Shimokawa et al.
ACTA MATERIALIA (2019)
Transformation-induced plasticity and high strength in beta titanium alloy manufactured by selective laser melting
Y. J. Liu et al.
MATERIALIA (2019)
On the fracture toughness and stable crack growth in shape memory alloy actuators in the presence of transformation-induced plasticity
S. Jape et al.
INTERNATIONAL JOURNAL OF FRACTURE (2018)
Tensile properties and deformation mode of Si-added Fe-18Mn-0.6C steels
Sang-Min Lee et al.
ACTA MATERIALIA (2018)
Stress release-induced interfacial twin boundary omega phase formation in it a beta type Ti-based single crystal displaying stress-induced alpha '' martensitic transformation
Y. Yang et al.
ACTA MATERIALIA (2018)
omega phase acts as a switch between dislocation channeling and joint twinning- and transformation-induced plasticity in a metastable beta titanium alloy
M. J. Lai et al.
ACTA MATERIALIA (2018)
Slip transfer across phase boundaries in dual phase titanium alloys and the effect on strain rate sensitivity
Zebang Zheng et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2018)
Slip transfer and deformation structures resulting from the low cycle fatigue of near-alpha titanium alloy Ti-6242Si
Sudha Joseph et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2018)
The crack nucleation in hierarchically nanotwinned metals
Feng Zhang et al.
ENGINEERING FRACTURE MECHANICS (2018)
Nanograin layer formation at crack initiation region for very-high-cycle fatigue of a Ti-6Al-4V alloy
H. Su et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2017)
Continuum approach for modeling fatigue in amorphous glassy polymers. Applications to the investigation of damage-ratcheting interaction in polycarbonate
Sami Holopainen et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
Microstructural evolution of a ductile metastable β titanium alloy with combined TRIP/TWIP effects
J. Y. Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Phase stability dependence of deformation mode correlated mechanical properties and elastic properties in Ti-Nb gum metal
Sumin Shin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
High dislocation density-induced large ductility in deformed and partitioned steels
B. B. He et al.
SCIENCE (2017)
On the microstructural characteristics influencing the yielding behavior of ultra-fine grained medium-Mn steels
Katharina Steineder et al.
ACTA MATERIALIA (2017)
Fatigue mediated lattice rotation in Al alloys
R. Goswami et al.
ACTA MATERIALIA (2017)
Dislocation mediated variant selection for secondary twinning in compression of pure titanium
Shun Xu et al.
ACTA MATERIALIA (2017)
Deformation twinning in the full-α martensitic Ti-25Ta-20Nb shape memory alloy
Emmanuel Bertrand et al.
ACTA MATERIALIA (2016)
A combined grain scale elastic-plastic criterion for identification of fatigue crack initiation sites in a twin containing polycrystalline nickel-base superalloy
J. C. Stinville et al.
ACTA MATERIALIA (2016)
The dynamic response of a metastable β Ti-Nb alloy to high strain rates at room and elevated temperatures
Hongyi Zhan et al.
ACTA MATERIALIA (2016)
Strain hardening by dynamic slip band refinement in a high-Mn lightweight steel
E. Welsch et al.
ACTA MATERIALIA (2016)
On the mechanism of {332} twinning in metastable β titanium alloys
M. J. Lai et al.
ACTA MATERIALIA (2016)
Deformation mechanism of ω-enriched Ti-Nb-based gum metal: Dislocation channeling and deformation induced ω-β transformation
M. J. Lai et al.
ACTA MATERIALIA (2015)
Formation of nanocrystalline β structure in metastable beta Ti alloy during high pressure torsion: The role played by stress induced martensitic transformation
A. Zafari et al.
ACTA MATERIALIA (2015)
Dynamic softening behavior of TC18 titanium alloy during hot deformation
Y. Q. Ning et al.
MATERIALS & DESIGN (2015)
The TriBeam system: Femtosecond laser ablation in situ SEM
McLean P. Echlin et al.
MATERIALS CHARACTERIZATION (2015)
A new titanium alloy with a combination of high strength, high strain hardening and improved ductility
F. Sun et al.
SCRIPTA MATERIALIA (2015)
Nanoscale origins of the damage tolerance of the high-entropy alloy CrMnFeCoNi
ZiJiao Zhang et al.
NATURE COMMUNICATIONS (2015)
Origin of {332} twinning in metastable β-Ti alloys
Hirobumi Tobe et al.
ACTA MATERIALIA (2014)
Strain rate effects on tensile deformation behaviors for Fe-22Mn-0.6C-(1.5Al) twinning-induced plasticity steel
H. K. Yang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
A constitutive model of the deformation behaviour of twinning induced plasticity (TWIP) steel at different temperatures
V. Shterner et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Deformation mechanisms of a 20Mn TWIP steel investigated by in situ neutron diffraction and TEM
Y. F. Shen et al.
ACTA MATERIALIA (2013)
Nanodomain structure and its effect on abnormal thermal expansion behavior of a Ti-23Nb-2Zr-0.7Ta-1.2O alloy
Hee Young Kim et al.
ACTA MATERIALIA (2013)
Investigation of early stage deformation mechanisms in a metastable β titanium alloy showing combined twinning-induced plasticity and transformation-induced plasticity effects
F. Sun et al.
ACTA MATERIALIA (2013)
Probabilistic simulation of fatigue damage and life scatter of metallic components
M. Naderi et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2013)
The role of elastic anisotropy, length scale and crystallographic slip in fatigue crack nucleation
C. A. Sweeney et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2013)
Effects of grain size, texture and twinning on mechanical properties and work-hardening behaviors of pure Mg
Yandang Qiao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Nanoindentation investigation on the mechanical stability of individual austenite grains in a medium-Mn transformation-induced plasticity steel
B. B. He et al.
SCRIPTA MATERIALIA (2013)
Mechanism of twinning-induced plasticity in β-type Ti-15Mo alloy
Xiaohua Min et al.
SCRIPTA MATERIALIA (2013)
Deformation induced anisotropic responses of Ti-6Al-4V alloy Part II: A strain rate and temperature dependent anisotropic yield criterion
Akhtar S. Khan et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2012)
Quasi-cleavage Fracture along Annealing Twin Boundaries in a Fe-Mn-C Austenitic Steel
Motomichi Koyama et al.
ISIJ INTERNATIONAL (2012)
Premature Fracture Mechanism in an Fe-Mn-C Austenitic Steel
Motomichi Koyama et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2012)
Controlling reversible martensitic transformation in titanium alloys with high strength and low elastic modulus
Y. L. Hao et al.
SCRIPTA MATERIALIA (2012)
Effect of grain size on tensile properties of fine-grained metastable β titanium alloys fabricated by stress-induced martensite and its reverse transformations
Ming-Hui Cai et al.
SCRIPTA MATERIALIA (2012)
On the design of new β-metastable titanium alloys with improved work hardening rate thanks to simultaneous TRIP and TWIP effects
Matthieu Marteleur et al.
SCRIPTA MATERIALIA (2012)
Design of a novel Mn-based 1 GPa duplex stainless TRIP steel with 60% ductility by a reduction of austenite stability
C. Herrera et al.
ACTA MATERIALIA (2011)
Lattice modulation and superelasticity in oxygen-added β-Ti alloys
Masaki Tahara et al.
ACTA MATERIALIA (2011)
Transmission electron microscopy investigation of dislocation slip during superelastic cycling of Ni-Ti wires
R. Delville et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2011)
The conflicts between strength and toughness
Robert O. Ritchie
NATURE MATERIALS (2011)
Roles of grain boundaries in improving fracture toughness of ultrafine-grained metals
T. Shimokawa et al.
PHYSICAL REVIEW B (2011)
Twinning system selection in a metastable β-titanium alloy by Schmid factor analysis
E. Bertrand et al.
SCRIPTA MATERIALIA (2011)
On the mechanism of twin formation in Fe-Mn-C TWIP steels
H. Idrissi et al.
ACTA MATERIALIA (2010)
Ductile vs. brittle behavior of pre-cracked nanocrystalline and ultrafine-grained materials
I. A. Ovid'ko et al.
ACTA MATERIALIA (2010)
Flow stress analysis of TWIP steel via the XRD measurement of dislocation density
G. Dini et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Investigation of strain-induced martensitic transformation in metastable austenite using nanoindentation
T. -H. Ahn et al.
SCRIPTA MATERIALIA (2010)
Self-accommodation in Ti-Nb shape memory alloys
Y. W. Chai et al.
ACTA MATERIALIA (2009)
Plasticity induced transformation in a metastable β Ti-1023 alloy by controlled heat treatments
S. Neelakantan et al.
MATERIALS SCIENCE AND TECHNOLOGY (2009)
High-strength and ductile glassy-crystal Ni-Cu-Zr-Ti composite exhibiting stress-induced martensitic transformation
Dmitri V. Louzguine-Luzgin et al.
PHILOSOPHICAL MAGAZINE (2009)
Grain size effect on crack blunting in nanocrystalline materials
I. A. Ovid'ko et al.
SCRIPTA MATERIALIA (2009)
On the mechanisms of fatigue facet nucleation in titanium alloys
F. P. E. Dunne et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2008)
MATERIALS SCIENCE Deformation of the ultra-strong
Subra Suresh et al.
NATURE (2008)
Trigger stress for stress-induced martensitic transformation during tensile deformation in Ti-Al-Nb alloys: Effect of grain size
Archana Paradkar et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2008)
Toward a quantitative understanding of mechanical behavior of nanocrystalline metals
M. Dao et al.
ACTA MATERIALIA (2007)
Effect of oxygen content and microstructure on the thermo-mechanical response of three Ti-6Al-4V alloys: Experiments and modeling over a wide range of strain-rates and temperatures
Akhtar S. Khan et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2007)
Superelasticity in Ti-10V-2Fe-3Al alloys with nitrogen addition
T. Furuhara et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
TRIP-assisted steels: cracking of high-carbon martensite
S. Chatterjee et al.
MATERIALS SCIENCE AND TECHNOLOGY (2006)
Study of the austenite quantification by X-ray diffraction in the 18Ni-Co-Mo-Ti maraging 300 steel
JM Pardal et al.
JOURNAL OF MATERIALS SCIENCE (2006)
Effect of βgrain size on stress induced martensitic transformation in βsolution treated Ti-10V-2Fe-W alloy
A Bhattacharjee et al.
SCRIPTA MATERIALIA (2005)
Quasi-static and dynamic loading responses and constitutive modeling of titanium alloys
AS Khan et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2004)
Mechanical behavior of nanocrystalline metals and alloys
KS Kumar et al.
ACTA MATERIALIA (2003)
Progress in structural materials for aerospace systems
JC Williams et al.
ACTA MATERIALIA (2003)
Distinction between thermal and stress-induced martensitic transformations and inhomogeneity in internal stress
H Sakamoto
MATERIALS TRANSACTIONS (2002)
Effect of microstructure variations on the formation of deformation-induced martensite and associated tensile properties in a β metastable Ti alloy
T Grosdidier et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2000)