4.7 Article

A reusable metastructure for tri-directional energy dissipation

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Mechanical

A theory for bistable vibration isolators

Bo Yan et al.

Summary: This paper presents a general theory for bistable vibration isolators (BVIs) and reveals the bistable vibration isolation mechanism. The advantages of BVIs in vibration isolation are quantitatively verified through theoretical and numerical calculations, providing guidance for the design, analysis, and optimization of BVIs.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Article Engineering, Mechanical

Nonlinear damping and mass effects of electromagnetic shunt damping for enhanced nonlinear vibration isolation

Hongye Ma et al.

Summary: This study investigates the nonlinear mass and damping effects of nonlinear electromagnetic shunt damping on the vibration isolation performance of a permanent magnets based nonlinear vibration isolator. By designing a specific electromagnetic structure and analyzing the mechanic-electromagnetic coupling coefficient, equivalent nonlinear damping and mass are achieved. The use of inductance is found to change the mass and frequency response of the vibration isolator.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

Article Acoustics

A novel lever-type vibration isolator with eddy current damping

Bo Yan et al.

Summary: This study proposes a lever-type vibration isolator with eddy current damping, which can broaden the isolation band by adjusting the lever ratio and improve the vibration suppression performance. The effects of lever ratio, tip mass, material properties, geometric parameters, and excitation amplitude on vibration isolation performance are analyzed. ECD can further enhance vibration suppression in the resonance region, while transmissibility tends to stabilize in the isolation region with increasing lever ratio.

JOURNAL OF SOUND AND VIBRATION (2021)

Article Nanoscience & Nanotechnology

Hierarchical Honeycomb-Structured Electret/Triboelectric Nanogenerator for Biomechanical and Morphing Wing Energy Harvesting

Kai Tao et al.

Summary: The hierarchical honeycomb-inspired triboelectric nanogenerator (h-TENG) proposed in this study demonstrates remarkable energy harvesting capabilities for biomechanical and UAV applications. With a peak power density of 0.275 mW cm(-3) (or 2.48 mW g(-1)), the h-TENG shows potential for real-world applications in areas such as insole pressure mapping and UAV wing energy conversion.

NANO-MICRO LETTERS (2021)

Article Engineering, Mechanical

Controlled snapping sequence and energy absorption in multistable mechanical metamaterial cylinders

Tark Raj Giri et al.

Summary: Mechanical metamaterials with bistable unit cells using additive manufacturing processes can tailor energy absorption and snapping sequence, leading to predictable geometric reconfiguration. Experimental and computational results show that energy absorption increases with the number of layers and is directionally dependent on the printed configuration of the lattices. By changing the thickness of the sinusoidal beams, the energy absorbed and snapping sequence of multistable cylindrical structures can be controlled, offering new opportunities for practical applications in elastic wave control and reconfigurable structures.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

Article Engineering, Mechanical

Tunable ultralow frequency wave attenuations in one-dimensional quasi-zero-stiffness metamaterial

Jiaxi Zhou et al.

Summary: This study designed a one-dimensional metamaterial for attenuating ultra-low frequency waves, achieving quasi-zero stiffness through optimized configuration with adjustable band gap structure. Results show that band gap can be tuned by changing pre-compression, enabling attenuation of ultra-low frequency waves.

INTERNATIONAL JOURNAL OF MECHANICS AND MATERIALS IN DESIGN (2021)

Article Engineering, Mechanical

A bistable vibration isolator with nonlinear electromagnetic shunt damping

Bo Yan et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

Article Mechanics

1D and 2D snapping mechanical metamaterials with cylindrical topology

Hang Yang et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2020)

Article Mechanics

Multistable Cylindrical Mechanical Metastructures: Theoretical and Experimental Studies

Jian Hua et al.

JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2019)

Article Engineering, Mechanical

Reusable metamaterial via inelastic instability for energy absorption

Xiaojun Tan et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)

Article Mechanics

Multistable Cosine-Curved Dome System for Elastic Energy Dissipation

Mansour Alturki et al.

JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2019)

Article Engineering, Mechanical

Application of smart honeycomb structures for automotive passive safety

Olga A. Ganilova et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING (2018)

Article Engineering, Mechanical

An origami-inspired structure with graded stiffness

Jiayao Ma et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

Article Physics, Applied

Negative stiffness honeycombs as tunable elastic metamaterials

Benjamin M. Goldsberry et al.

JOURNAL OF APPLIED PHYSICS (2018)

Article Materials Science, Multidisciplinary

Impact behavior of negative stiffness honeycomb materials

David A. Debeau et al.

JOURNAL OF MATERIALS RESEARCH (2018)

Article Multidisciplinary Sciences

Harnessing bistability for directional propulsion of soft, untethered robots

Tian Chen et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2018)

Review Materials Science, Multidisciplinary

Mechanical metamaterials associated with stiffness, rigidity and compressibility: A brief review

Xianglong Yu et al.

PROGRESS IN MATERIALS SCIENCE (2018)

Article Computer Science, Interdisciplinary Applications

Design of buckling-induced mechanical metamaterials for energy absorption using topology optimization

Qi Chen et al.

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2018)

Article Materials Science, Multidisciplinary

Design, fabrication, and analysis of lattice exhibiting energy absorption via snap-through behavior

Chan Soo Ha et al.

MATERIALS & DESIGN (2018)

Article Mechanics

Three-Dimensional-Printed Multistable Mechanical Metamaterials With a Deterministic Deformation Sequence

Kaikai Che et al.

JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2017)

Article Engineering, Mechanical

Enhanced acoustic insulation properties of composite metamaterials having embedded negative stiffness inclusions

D. Chronopoulos et al.

EXTREME MECHANICS LETTERS (2017)

Article Chemistry, Multidisciplinary

Tailored Buckling Microlattices as Reusable Light-Weight Shock Absorbers

Tobias Frenzel et al.

ADVANCED MATERIALS (2016)

Article Chemistry, Multidisciplinary

Multistable Architected Materials for Trapping Elastic Strain Energy

Sicong Shan et al.

ADVANCED MATERIALS (2015)

Article Chemistry, Multidisciplinary

Snapping Mechanical Metamaterials under Tension

Ahmad Rafsanjani et al.

ADVANCED MATERIALS (2015)

Article Engineering, Mechanical

Negative stiffness honeycombs for recoverable shock isolation

Dixon M. Correa et al.

RAPID PROTOTYPING JOURNAL (2015)

Article Engineering, Mechanical

Phase transforming cellular materials

David Restrepo et al.

EXTREME MECHANICS LETTERS (2015)

Article Mechanics

Bistable buckled beam and force actuation: Experimental validations

B. Camescasse et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2014)

Article Acoustics

A bifurcation-based coupled linear-bistable system for microscale mass sensing

R. L. Harne et al.

JOURNAL OF SOUND AND VIBRATION (2014)

Article Physics, Multidisciplinary

Programmable Mechanical Metamaterials

Bastiaan Florijn et al.

PHYSICAL REVIEW LETTERS (2014)

Article Multidisciplinary Sciences

Periodic Architecture for High Performance Shock Absorbing Composites

Abha Misra et al.

SCIENTIFIC REPORTS (2013)

Article Engineering, Mechanical

Curve Decomposition for Large Deflection Analysis of Fixed-Guided Beams With Application to Statically Balanced Compliant Mechanisms

Charles Kim et al.

JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME (2012)

Article Engineering, Mechanical

Modeling and Experiments of Buckling Modes and Deflection of Fixed-Guided Beams in Compliant Mechanisms

Gregory L. Holst et al.

JOURNAL OF MECHANICAL DESIGN (2011)

Article Multidisciplinary Sciences

Ultralight Metallic Microlattices

T. A. Schaedler et al.

SCIENCE (2011)

Article Mechanics

Post-buckling and snap-through behavior of inclined slender beams

Jian Zhao et al.

JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2008)

Article Engineering, Electrical & Electronic

The pull-in behavior of electrostatically actuated bistable microstructures

Slava Krylov et al.

JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2008)

Article Acoustics

Static analysis of a passive vibration isolator with quasi-zero-stiffness characteristic

A. Carrella et al.

JOURNAL OF SOUND AND VIBRATION (2007)

Review Multidisciplinary Sciences

Metamaterials and negative refractive index

DR Smith et al.

SCIENCE (2004)

Article Materials Science, Multidisciplinary

Dramatically stiffer elastic composite materials due to a negative stiffness phase?

RS Lakes et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2002)

Article Materials Science, Multidisciplinary

Rate independent hysteresis in a bi-stable chain

G Puglisi et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2002)

Article Physics, Fluids & Plasmas

Wave propagation in media having negative permittivity and permeability

RW Ziolkowski et al.

PHYSICAL REVIEW E (2001)

Article Multidisciplinary Sciences

Extreme damping in composite materials with negative-stiffness inclusions

RS Lakes et al.

NATURE (2001)

Article Materials Science, Multidisciplinary

Mechanics of a discrete chain with bi-stable elements

G Puglisi et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2000)