4.7 Article

Enhanced photooxidative desulphurization of dibenzothiophene over fibrous silica tantalum: Influence of metal-disturbance electronic band structure

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Environmental

Cyanazine herbicide monitoring as a hazardous substance by a DNA nanostructure biosensor

Hassan Karimi-Maleh et al.

Summary: The research focused on monitoring cyanazine levels using an electrochemical strategy, synthesizing a Pt-Pd-CdO/SWCNTs composite and modifying a gold electrode for detection. The composite showed improved conductivity and lower charge-transfer resistance, allowing for monitoring of cyanazine at nanomolar concentrations. Differential pulse voltammograms indicated a linear dynamic range and detection limit, while molecular docking studies supported experimental results. The composite was successfully utilized for monitoring cyanazine in food and water samples.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Article Engineering, Environmental

Enhanced visible-light driven multi-photoredox Cr(VI) and p-cresol by Si and Zr interplay in fibrous silica-zirconia

F. F. A. Aziz et al.

Summary: The synergistic photoredox of Cr(VI) and pcresol (pC) by innovative fibrous silica zirconia (FSZr) photocatalyst was reported. FSZr exhibited high efficiency for removing Cr(VI) and pC in a simultaneous system, potentially suitable for wastewater treatment of various pollutants.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Chemistry, Applied

Facile fabrication of CeF3/g-C3N4 heterojunction photocatalysts with upconversion properties for enhanced photocatalytic desulfurization performance

Xiaowang Lu et al.

Summary: The CeF3 semiconductor with upconversion property was constructed on graphite carbonitride (g-C3N4) nanosheets using microwave hydrothermal method. The CeF3/g-C3N4 nanocomposite showed efficient photocatalytic desulfurization of model oil under visible light radiation, thanks to the synergistic effect between CeF3 and g-C3N4. This study provides a potential strategy for improving photocatalytic desulfurization processes using CeF3/g-C3N4 nanocomposites.

JOURNAL OF RARE EARTHS (2021)

Article Materials Science, Ceramics

Photocatalytic desulfurization of thiophene under visible light by hollow flower-like NixZn2-xV2O7/WO4 nanostructures

Mahvash Siahmansouri et al.

Summary: The synthesis and characterization of hollow flower-like NixZn2-xV2O7/WO4 nanostructures were reported using a simple Pechini sol-gel method to improve desulfurization efficiency of petroleum derivatives. Factors affecting morphology, such as chelating agent, gelling agent, and elements ratio, were investigated to determine optimal conditions. SEM images showed that involvement of all elements Ni, Zn, V, and W resulted in formation of hollow structures with high surface area, leading to over 95% efficiency of photocatalytic oxidative desulfurization after 2.5 hours under visible light. The presence of EDTA reduced efficiency to 23%, indicating superoxide as the most active radical species in the process. Comparisons of different compositions showed varying efficiency, highlighting the impact of both composition and morphology.

CERAMICS INTERNATIONAL (2021)

Article Materials Science, Biomaterials

MC3T3-E1 cell response to microporous tantalum oxide surfaces enriched with Ca, P and Mg

C. F. Almeida Alves et al.

Summary: The formation of a porous oxide surface doped with osteoconductive elements through micro arc oxidation was investigated, with studies on the effect of parameters like electrolyte composition on surface morphology and chemical composition. In vitro tests confirmed the biocompatibility and non-toxicity of the samples, with promising results for cell differentiation in the Ta-CaP samples.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)

Article Energy & Fuels

Synthesis BiVO4 modified by CuO supported onto bentonite for molecular oxygen photocatalytic oxidative desulfurization of fuel under visible light

Jiawei Cui et al.

Summary: The CuO-modified BiVO4/BTT composite photocatalyst showed significantly higher photocatalytic oxidative desulfurization efficiency for model oil under visible light, especially for DBT, compared to BiVO4 and BiVO4/BTT. The sulfur removal reactions were pseudo-first-order, with the desulfurization activity following the order of DBT > 4,6-DMDBT > BT. The photocatalytic oxidative desulfurization mechanism of CuO-BiVO4/BTT was analyzed by determining band gap, valence band, and conduction band positions. Furthermore, the recycling experiment demonstrated that CuO-BiVO4/BTT maintained good DBT removal efficiency even after ten cycles.
Article Materials Science, Multidisciplinary

Enhanced electrochemical performance and stability of Pt/Ni electrocatalyst supported on SiO2-PANI nanocomposite: A combined experimental and theoretical study

Mohammad Soleimani Lashkenari et al.

Summary: Polyaniline-Silica (PANI-SiO2) nanocomposite was developed as a support to enhance the performance of Pt/Ni electrocatalyst in direct methanol fuel cells (DMFCs). Experimental data and theoretical calculations confirmed that Pt/Ni/SiO2-PANI electrocatalyst showed outstanding catalytic activity and stability, which are crucial for practical applications.

MATERIALS CHEMISTRY AND PHYSICS (2021)

Article Materials Science, Ceramics

The production of rGO/RuO2 aerogel supercapacitor and analysis of its electrochemical performances

Satiye Korkmaz et al.

Summary: In this study, ruthenium was bonded to reduced graphene oxide to create aerogel electrodes with high specific capacitance and energy density for symmetrical supercapacitors. Through CV voltammograms testing, the aerogel exhibited a highest specific capacitance of 328.6 F g-1 and maintained a high energy density even at high power densities.

CERAMICS INTERNATIONAL (2021)

Article Engineering, Electrical & Electronic

Fabrication of Z-scheme flower-like AgI/Bi2O3 heterojunctions with enhanced visible light photocatalytic desulfurization under mild conditions

Mehdi Mousavi-Kamazani et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2020)

Article Engineering, Environmental

Superior sulfate radicals-induced visible-light-driven photodegradation of pharmaceuticals by appropriate Ce loading on fibrous silica ceria

A. A. Fauzi et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2020)

Article Engineering, Environmental

Efficient oxidative desulfurization of model fuel by visible-light-driven MoS2-CeO2/SiO2-Al2O3 nano photocatalyst coating

Sakineh Mohammadzadeh Yengejeh et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2020)

Article Chemistry, Applied

Effect of the Nature of Metal Nanoparticles on the Photocatalytic Degradation of Rhodamine B

Ahmad S. Alshammari et al.

TOPICS IN CATALYSIS (2019)

Article Engineering, Environmental

Boosting the photocatalytic oxidative desulfurization of dibenzothiophene by decoration of MWO4 (M = Cu, Zn, Ni) on WO3

Mingliang Kang et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2019)

Article Chemistry, Inorganic & Nuclear

Tailoring the Properties of Metal Oxide Loaded/KCC-1 toward a Different Mechanism of CO2 Methanation by in Situ IR and ESR

Muhamed Yusuf Shahul Hamid et al.

INORGANIC CHEMISTRY (2018)

Article Chemistry, Physical

Catalytic oxidative desulfurization of dibenzothiophene utilizing molybdenum and vanadium oxides supported on MCM-41

Abbas Teimouri et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)

Article Environmental Sciences

Altering fiber density of cockscomb-like fibrous silica-titania catalysts for enhanced photodegradation of ibuprofen

A. A. Fauzi et al.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2018)

Article Materials Science, Coatings & Films

Evaluation of cell activation promoted by tantalum and tantalum oxide coatings deposited by reactive DC magnetron sputtering

Hugo Moreira et al.

SURFACE & COATINGS TECHNOLOGY (2017)

Article Engineering, Environmental

Efficient and reusable iron-zinc oxide catalyst for oxidative desulfurization of model fuel

Wafaa Abdul-Kadhim et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2017)

Article Materials Science, Multidisciplinary

Structure and morphology transformation of ZnO by carbonation and thermal treatment

Pawel Kowalik et al.

MATERIALS RESEARCH BULLETIN (2015)

Article Chemistry, Physical

Experimental study on high temperature catalytic conversion of tars and organic sulfur compounds

Urs Rhyner et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)

Article Chemistry, Multidisciplinary

Visible-Light-Driven Cu(II)-(Sr1-yNay)(Ti1-xMox)O3 Photocatalysts Based on Conduction Band Control and Surface Ion Modification

Xiaoqing Qiu et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2010)

Article Chemistry, Physical

Desulfurization processes for fuel cells systems

S. Hernandeza et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2008)

Article Chemistry, Physical

Dynamics of removal of organosulfur compounds from diesel by adsorption on carbon aerogels for fuel cell applications

D Jayne et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2005)