相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Hydrogen and Carbon Nanotubes from Pyrolysis-Catalysis of Waste Plastics: A Review
Paul T. Williams
WASTE AND BIOMASS VALORIZATION (2021)
Plasma gasification of the medical waste
Altug Alp Erdogan et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)
Challenges and practices on waste management and disposal during COVID-19 pandemic
Dwi Hantoko et al.
JOURNAL OF ENVIRONMENTAL MANAGEMENT (2021)
Technological review on thermochemical conversion of COVID-19-related medical wastes
Chandra Wahyu Purnomo et al.
RESOURCES CONSERVATION AND RECYCLING (2021)
Disposal Behavior of Used Masks during the COVID-19 Pandemic in the Moroccan Community: Potential Environmental Impact
Nezha Mejjad et al.
INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH (2021)
Tackling the toxics in plastics packaging
Jane Muncke
PLOS BIOLOGY (2021)
The COVID-19 pandemic face mask waste: A blooming threat to the marine environment
Selvakumar Dharmaraj et al.
CHEMOSPHERE (2021)
Pyrolysis: An effective technique for degradation of COVID-19 medical wastes
Selvakumar Dharmaraj et al.
CHEMOSPHERE (2021)
Abatement of hazardous materials and biomass waste via pyrolysis and co-pyrolysis for environmental sustainability and circular economy
Kit Wayne Chew et al.
ENVIRONMENTAL POLLUTION (2021)
Plastic waste associated with the COVID-19 pandemic: Crisis or opportunity?
Kuan Shiong Khoo et al.
JOURNAL OF HAZARDOUS MATERIALS (2021)
Disposal methods, health effects and emission regulations for sulfur hexafluoride and its by-products
Anupreetha Parthiban et al.
JOURNAL OF HAZARDOUS MATERIALS (2021)
COVID-19 pandemic and healthcare solid waste management strategy-A mini-review
Atanu Kumar Das et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2021)
COVID-19 pandemic and emerging plastic-based personal protective equipment waste pollution and management in Africa
Nsikak U. Benson et al.
JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)
An Overview of Plastic Waste Generation and Management in Food Packaging Industries
Lindani Koketso Ncube et al.
RECYCLING (2021)
Experimental investigation on gasification characteristics of polyethylene terephthalate (PET) microplastics in supercritical water
Bin Bai et al.
FUEL (2020)
Tribological characteristics of medical gloves in contact with human skin and skin equivalents
Jakob Manhart et al.
POLYMER TESTING (2020)
Supercritical water gasification of biomass model compounds: A review
Yulin Hu et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2020)
Gasification of plastic waste for synthesis gas production
Dang Saebea et al.
ENERGY REPORTS (2020)
Personal protective equipment and Covid 19- a risk to healthcare staff?
J.B.T. Herron et al.
BRITISH JOURNAL OF ORAL & MAXILLOFACIAL SURGERY (2020)
An Imperative Need for Research on the Role of Environmental Factors in Transmission of Novel Coronavirus (COVID-19)
Guangbo Qu et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2020)
COVID-19: Facemask use prevalence in international airports in Asia, Europe and the Americas, March 2020
Habida Elachola et al.
TRAVEL MEDICINE AND INFECTIOUS DISEASE (2020)
Exploration of alternative supply chains and distributed manufacturing in response to COVID-19; a case study of medical face shields
Alborz Shokrani et al.
MATERIALS & DESIGN (2020)
Minimising the present and future plastic waste, energy and environmental footprints related to COVID-19
Jiri Jaromir Klemes et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2020)
Sustainable cycles and management of plastics: A brief review of RCR publications in 2019 and early 2020
Wei-Qiang Chen et al.
RESOURCES CONSERVATION AND RECYCLING (2020)
Plastics recycling after the global pandemic: resurgence or regression?
Sebastian Kahlert et al.
RESOURCES CONSERVATION AND RECYCLING (2020)
Improper solid waste management increases potential for COVID-19 spread in developing countries
Christopher Nzediegwu et al.
RESOURCES CONSERVATION AND RECYCLING (2020)
Covid-19 face masks: A potential source of microplastic fibers in the environment
Oluniyi O. Fadare et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2020)
A Critical Review of SCWG in the Context of Available Gasification Technologies for Plastic Waste
Benedetta Ciuffi et al.
APPLIED SCIENCES-BASEL (2020)
Nature's fight against plastic pollution: Algae for plastic biodegradation and bioplastics production
Wen Yi Chia et al.
ENVIRONMENTAL SCIENCE AND ECOTECHNOLOGY (2020)
Rethinking and optimising plastic waste management under COVID-19 pandemic: Policy solutions based on redesign and reduction of single-use plastics and personal protective equipment
Ana L. Patricio Silva et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2020)
Unusual purchasing behavior during the early stages of the COVID-19 pandemic: The stimulus-organism-response approach
Samuli Laato et al.
JOURNAL OF RETAILING AND CONSUMER SERVICES (2020)
Current approaches to waste polymer utilization and minimization: a review
Meltem Okan et al.
JOURNAL OF CHEMICAL TECHNOLOGY AND BIOTECHNOLOGY (2019)
Microplastics in the environment: A review of analytical methods, distribution, and biological effects
Shaoliang Zhang et al.
TRAC-TRENDS IN ANALYTICAL CHEMISTRY (2019)
Plastics: Environmental and Biotechnological Perspectives on Microbial Degradation
Dominik Danso et al.
APPLIED AND ENVIRONMENTAL MICROBIOLOGY (2019)
Benchmarking the in Vitro Toxicity and Chemical Composition of Plastic Consumer Products
Lisa Zimmermann et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2019)
Use of Supercritical Water for the Liquefaction of Polypropylene into Oil
Wan-Ting Chen et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)
Catalysts for gasification: a review
R. A. Arnold et al.
SUSTAINABLE ENERGY & FUELS (2019)
Synergistic effects in steam gasification of combined biomass and plastic waste mixtures
K. G. Burra et al.
APPLIED ENERGY (2018)
Supercritical water gasification of biomass for hydrogen production Review
Catalina Rodriguez Correa et al.
JOURNAL OF SUPERCRITICAL FLUIDS (2018)
Recent advances in the gasification of waste plastics. A critical overview
Gartzen Lopez et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)
Dioxins and furans: A review from chemical and environmental perspectives
Sofian Kanan et al.
TRENDS IN ENVIRONMENTAL ANALYTICAL CHEMISTRY (2018)
Catalytic activities of nickel, dolomite, and olivine for tar removal and H2-enriched gas production in biomass gasification process
Ahsanullah Soomro et al.
ENERGY & ENVIRONMENT (2018)
Manipulating the H2/CO ratio from dry reforming of simulated mixed waste plastics by the addition of steam
Juniza Md Saad et al.
FUEL PROCESSING TECHNOLOGY (2017)
A review on plasma gasification for solid waste disposal
A. Sanlisoy et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Thermochemical routes for the valorization of waste polyolefinic plastics to produce fuels and chemicals. A review
Gartzen Lopez et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
The future of plastics recycling Chemical advances are increasing the proportion of polymer waste that can be recycled
Jeannette M. Garcia et al.
SCIENCE (2017)
Molecular-Level Kinetic Modeling of the Gasification of Common Plastics
Scott R. Horton et al.
ENERGY & FUELS (2016)
Co-gasification of wastewater sludge and different feedstock: Feasibility study
Salah Akkache et al.
BIOMASS & BIOENERGY (2016)
Review of gasification fundamentals and new findings: Reactors, feedstock, and kinetic studies
Nader Mahinpey et al.
CHEMICAL ENGINEERING SCIENCE (2016)
Catalytic co-pyrolysis of paper biomass and plastic mixtures (HDPE (high density polyethylene), PP (polypropylene) and PET (polyethylene terephthalate)) and product analysis
Jayeeta Chattopadhyay et al.
ENERGY (2016)
A review on pyrolysis of plastic wastes
Shafferina Dayana Anuar Sharuddin et al.
ENERGY CONVERSION AND MANAGEMENT (2016)
Time and temperature depended fuel gas generation from pyrolysis of real world municipal plastic waste
Rohit Kumar Singh et al.
FUEL (2016)
Fluidized-bed gasification combined continuous sorption-enhanced steam reforming system to continuous hydrogen production from waste plastic
Binlin Dou et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
TEMPERATURE AND TIME INFLUENCE ON THE WASTE PLASTICS PYROLYSIS IN THE FIXED BED REACTOR
Sasa V. Papuga et al.
THERMAL SCIENCE (2016)
Biomass gasification technology: The state of the art overview
Antonio Molino et al.
JOURNAL OF ENERGY CHEMISTRY (2016)
Sewage sludge valorization by flash pyrolysis in a conical spouted bed reactor
Jon Alvarez et al.
CHEMICAL ENGINEERING JOURNAL (2015)
Air gasification of PVC (polyvinyl chloride)-containing plastic waste in a two-stage gasifier using Ca-based additives and Ni-loaded activated carbon for the production of clean and hydrogen-rich producer gas
Min-Hwan Cho et al.
ENERGY (2015)
Fischer-Tropsch synthesis: Effect of ammonia in syngas on the Fischer-Tropsch synthesis performance of a precipitated iron catalyst
Wenping Ma et al.
JOURNAL OF CATALYSIS (2015)
Water - A magic solvent for biomass conversion
Andrea Kruse et al.
JOURNAL OF SUPERCRITICAL FLUIDS (2015)
Chemical Catalyzed Recycling of Polymers: Catalytic Conversion of PE, PP and PS into Fuels and Chemicals over H-Y
Laura C. Lerici et al.
INTERNATIONAL CONGRESS OF SCIENCE AND TECHNOLOGY OF METALLURGY AND MATERIALS, SAM - CONAMET 2013 (2015)
Influence of Plastic Waste for Refuse-Derived Fuel on Downdraft Gasification
Chatchai Kungkajit et al.
2015 INTERNATIONAL CONFERENCE ON ALTERNATIVE ENERGY IN DEVELOPING COUNTRIES AND EMERGING ECONOMIES (2015)
Fast microwave-assisted catalytic gasification of biomass for syngas production and tar removal
Qinglong Xie et al.
BIORESOURCE TECHNOLOGY (2014)
Dry Reforming of Hydrocarbon Feedstocks
Yatish T. Shah et al.
CATALYSIS REVIEWS-SCIENCE AND ENGINEERING (2014)
Influence of operating conditions on the steam gasification of biomass in a conical spouted bed reactor
Aitziber Erkiaga et al.
CHEMICAL ENGINEERING JOURNAL (2014)
Two-stage air gasification of mixed plastic waste: Olivine as the bed material and effects of various additives and a nickel-plated distributor on the tar removal
Min-Hwan Cho et al.
ENERGY (2014)
High-Temperature Steam Gasification of Municipal Solid Waste, Rubber, Plastic and Wood
Uisung Lee et al.
ENERGY & FUELS (2014)
Catalytic Co-pyrolysis of Biomass and Different Plastics (Polyethylene, Polypropylene, and Polystyrene) To Improve Hydrocarbon Yield in a Fluidized-Bed Reactor
Huiyan Zhang et al.
ENERGY & FUELS (2014)
Production, characterization and fuel properties of alternative diesel fuel from pyrolysis of waste plastic grocery bags
Brajendra K. Sharma et al.
FUEL PROCESSING TECHNOLOGY (2014)
NiO/Dolomite Catalyzed Steam/O2 Gasification of Different Plastics and Their Mixtures
Prangneth Friengfung et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2014)
Hydrogen-rich gas as a product of two-stage co-gasification of lignite/waste plastics mixtures
Pavel Straka et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)
Hydrogen production from biomass and plastic mixtures by pyrolysis-gasification
Jon Alvarez et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)
Low-temperature catalytic conversion of lignite: 1. Steam gasification using potassium carbonate supported on perovskite oxide
Young-Kwang Kim et al.
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2014)
Production of high quality syngas from argon/water plasma gasification of biomass and waste
M. Hlina et al.
WASTE MANAGEMENT (2014)
Olivine as tar removal catalyst in biomass gasification: Catalyst dynamics under model conditions
Hans O. A. Fredriksson et al.
APPLIED CATALYSIS B-ENVIRONMENTAL (2013)
Novel three-phase steam-air plasma torch for gasification of high-caloric waste
Philip G. Rutberg et al.
APPLIED ENERGY (2013)
Modelling of tar formation and evolution for biomass gasification: A review
Carolina Font Palma
APPLIED ENERGY (2013)
ASPEN PLUS SIMULATION OF POLYETHYLENE GASIFICATION UNDER EQUILIBRIUM CONDITIONS
Nahla Al Amoodi et al.
CHEMICAL ENGINEERING COMMUNICATIONS (2013)
Energy recovery from co-gasification of waste polyethylene and polyethylene terephthalate blends
P. Kannan et al.
COMPUTERS & FLUIDS (2013)
Hydrothermal conversion of biomass to fuels and energetic materials
Andrea Kruse et al.
CURRENT OPINION IN CHEMICAL BIOLOGY (2013)
Air gasification of mixed plastic wastes using calcined dolomite and activated carbon in a two-stage gasifier to reduce tar
Min-Hwan Cho et al.
ENERGY (2013)
Production of low-tar producer gas from air gasification of mixed plastic waste in a two-stage gasifier using olivine combined with activated carbon
Min-Hwan Cho et al.
ENERGY (2013)
Characterisation of tars from biomass gasification: Effect of the operating conditions
J. J. Hernandez et al.
ENERGY (2013)
Syngas from steam gasification of polyethylene in a conical spouted bed reactor
Aitziber Erkiaga et al.
FUEL (2013)
Conversion of mixed plastic wastes in a dual fluidized bed steam gasifier
V. Wilk et al.
FUEL (2013)
Design and operation of a conical spouted bed reactor pilot plant (25 kg/h) for biomass fast pyrolysis
A. Ruth Fernandez-Akarregi et al.
FUEL PROCESSING TECHNOLOGY (2013)
eOptical measurement of tars in a fluidized bed gasifier: influence of fuel type and gasification parameters on their formation
Panagiotis Mitsakis et al.
BIOMASS CONVERSION AND BIOREFINERY (2013)
Effect of H2:CO ratio in syngas on the performance of a dual fuel diesel engine operation
Bibhuti B. Sahoo et al.
APPLIED THERMAL ENGINEERING (2012)
Experimental study on catalytic steam gasification of municipal solid waste for bioenergy production in a combined fixed bed reactor
Jianfen Li et al.
BIOMASS & BIOENERGY (2012)
Review of fast pyrolysis of biomass and product upgrading
A. V. Bridgwater
BIOMASS & BIOENERGY (2012)
Kinetic models for the oxy-fuel combustion of coal and coal/biomass blend chars obtained in N2 and CO2 atmospheres
M. V. Gil et al.
ENERGY (2012)
Influence of pressure, temperature and steam on tar and gas in allothermal fluidized bed gasification
Matthias Mayerhofer et al.
FUEL (2012)
Effect of steam content in the air-steam flow on biomass entrained flow gasification
J. J. Hernandez et al.
FUEL PROCESSING TECHNOLOGY (2012)
Characterization of the waxes obtained by the pyrolysis of polyolefin plastics in a conical spouted bed reactor
M. Arabiourrutia et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2012)
Sustainable energy: A review of gasification technologies
Emanuele Graciosa Pereira et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2012)
Influence of temperature on biomass pyrolysis in a conical spouted bed reactor
M. Amutio et al.
RESOURCES CONSERVATION AND RECYCLING (2012)
H2-rich syngas production by fluidized bed gasification of biomass and plastic fuel
G. Ruoppolo et al.
WASTE MANAGEMENT (2012)
The O2-enriched air gasification of coal, plastics and wood in a fluidized bed reactor
Maria Laura Mastellone et al.
WASTE MANAGEMENT (2012)
Process and technological aspects of municipal solid waste gasification. A review
Umberto Arena
WASTE MANAGEMENT (2012)
Catalytic pyrolysis of plastic wastes with two different types of catalysts: ZSM-5 zeolite and Red Mud
A. Lopez-Urionabarrenechea et al.
APPLIED CATALYSIS B-ENVIRONMENTAL (2011)
Characteristics of syngas from co-gasification of polyethylene and woodchips
I. I. Ahmed et al.
APPLIED ENERGY (2011)
Investigations on heat transfer and hydrodynamics under pyrolysis conditions of a pilot-plant draft tube conical spouted bed reactor
J. Makibar et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2011)
Subcritical Water as Reaction Environment: Fundamentals of Hydrothermal Biomass Transformation
Maria Moeller et al.
CHEMSUSCHEM (2011)
Air gasification of mixed plastic wastes using a two-stage gasifier for the production of producer gas with low tar and a high caloric value
Jin-Won Kim et al.
FUEL (2011)
Experimental test on a novel dual fluidised bed biomass gasifier for synthetic fuel production
K. Goransson et al.
FUEL (2011)
Continuous Polyolefin Cracking on an HZSM-5 Zeolite Catalyst in a Conical Spouted Bed Reactor
Gorka Elordi et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2011)
Catalytic Air Gasification of Plastic Waste (Polypropylene) in a Fluidized Bed. Part II: Effects of Some Operating Variables on the Quality of the Raw Gas Produced Using Olivine as the In-Bed Material
Jose M. Toledo et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2011)
Pyrolysis-gasification of plastics, mixed plastics and real-world plastic waste with and without Ni-Mg-Al catalyst
Chunfei Wu et al.
FUEL (2010)
Optimum operating conditions for a two-stage gasification process fueled by polypropylene by means of continuous reactor over ruthenium catalyst
Yeongsu Park et al.
FUEL PROCESSING TECHNOLOGY (2010)
Catalytic properties in polyolefin cracking of hierarchical nanocrystalline HZSM-5 samples prepared according to different strategies
D. P. Serrano et al.
JOURNAL OF CATALYSIS (2010)