相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Recent progress of the gas diffusion layer in proton exchange membrane fuel cells: Material and structure designs of microporous layer
Yange Yang et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)
Recent progress of gas diffusion layer in proton exchange membrane fuel cell: Two-phase flow and material properties
Qin Chen et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)
Mechanism and Model for Optimizing Polytetrafluoroethylene Distribution to Improve the Electrical and Thermal Conductivity of Treated Carbon Fiber Paper in Fuel Cells
Ruofan Zhang et al.
ACS APPLIED MATERIALS & INTERFACES (2021)
Effect of clamping pressure on liquid-cooled PEMFC stack performance considering inhomogeneous gas diffusion layer compression
Xiaohui Yan et al.
APPLIED ENERGY (2020)
A parametric study on the deformation of gas diffusion layer in PEM fuel cell
Taehyun Lee et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2020)
Improved analytical modeling and mechanical characterization of gas diffusion layers under compression load
Yang Xiao et al.
ENERGY SCIENCE & ENGINEERING (2020)
Supplier involvement in eco-innovation: The co-development of electric, hybrid and fuel cell technologies within the Japanese automotive industry
Antony Potter et al.
JOURNAL OF CLEANER PRODUCTION (2019)
An integrated model of the water transport in nonuniform compressed gas diffusion layers for PEMFC
Yifan Xu et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
Mass transport in anode gas diffusion layer of direct methanol fuel cell derived from compression effect
Guangrong Deng et al.
JOURNAL OF POWER SOURCES (2019)
Impact of gas diffusion layer mechanics on PEM fuel cell performance
P. Irmscher et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
A review of gas diffusion layers for proton exchange membrane fuel cells-With a focus on characteristics, characterization techniques, materials and designs
Adnan Ozden et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2019)
Review of gas diffusion layer for proton exchange membrane-based technologies with a focus on unitised regenerative fuel cells
Reza Omrani et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
Investigation of two-phase flow in the compressed gas diffusion layer microstructures
Xia Zhou et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
Stresses and their impacts on proton exchange membrane fuel cells: A review
Ahmed Mohmed Dafalla et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)
Electrical resistance and microstructure of typical gas diffusion layers for proton exchange membrane fuel cell under compression
Diankai Qiu et al.
APPLIED ENERGY (2018)
A constitutive law to predict the compression of gas diffusion layers
Christophe Carral et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)
The Role of Compressive Stress on Gas Diffusion Media Morphology and Fuel Cell Performance
Robert W. Atkinson et al.
ACS APPLIED ENERGY MATERIALS (2018)
Investigation of GDL compression effects on the performance of a PEM fuel cell cathode by lattice Boltzmann method
G. R. Molaeimanesh et al.
JOURNAL OF POWER SOURCES (2017)
Material and Morphological Heat Transfer Properties of Fuel Cell Porous Transport Layers
Vinaykumar Konduru et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Review on microstructure modelling of a gas diffusion layer for proton exchange membrane fuel cells
D. M. Fadzillah et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
Thermomechanical characterisation of commercial Gas Diffusion Layers of a Proton Exchange Membrane Fuel Cell for high compressive pre-loads under dynamic excitation
Y. Faydi et al.
FUEL (2016)
Heterogeneous porosity distributions of polymer electrolyte membrane fuel cell gas diffusion layer materials with rib-channel compression
R. Banerjee et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
Measurement of effective bulk and contact resistance of gas diffusion layer under inhomogeneous compression - Part II: Thermal conductivity
Prabudhya Roy Chowdhury et al.
JOURNAL OF POWER SOURCES (2016)
Numerical and experimental study of the effects of the electrical resistance and diffusivity under clamping pressure on the performance of a metallic gas-diffusion layer in polymer electrolyte fuel cells
Shiro Tanaka et al.
JOURNAL OF POWER SOURCES (2016)
Measurement of effective bulk and contact resistance of gas diffusion layer under inhomogeneous compression - Part I: Electrical conductivity
Ajit Vikram et al.
JOURNAL OF POWER SOURCES (2016)
Gas-diffusion-layer structural properties under compression via X-ray tomography
Iryna V. Zenyuk et al.
JOURNAL OF POWER SOURCES (2016)
Effect of gas diffusion layer compression on the polarization curves of a polymer electrolyte membrane fuel cell: Analysis using a polarization curve-fitting model
In-Su Han et al.
KOREAN JOURNAL OF CHEMICAL ENGINEERING (2016)
Degradations analysis and aging modeling for health assessment and prognostics of PEMFC
Marine Jouin et al.
RELIABILITY ENGINEERING & SYSTEM SAFETY (2016)
A review of the gas diffusion layer in proton exchange membrane fuel cells: Durability and degradation
Jaeman Park et al.
APPLIED ENERGY (2015)
Probing water distribution in compressed fuel-cell gas-diffusion layers using X-ray computed tomography
Iryna V. Zenyuk et al.
ELECTROCHEMISTRY COMMUNICATIONS (2015)
Mechanical characterization and analytical modeling of gas diffusion layers under cyclic compression
P. A. Gigos et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)
Deconvolution of electrical contact and bulk resistance of gas diffusion layers for fuel cell applications
Pradeep Kumar Sow et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)
A numerical analysis of PEMFC stack assembly through a 3D finite element model
Christophe Carral et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)
Three-dimensional study of compressed gas diffusion layers using synchrotron X-ray imaging
C. Toetzke et al.
JOURNAL OF POWER SOURCES (2014)
Effects of polytetrafluoroethylene treatment and compression on gas diffusion layer microstructure using high-resolution X-ray computed tomography
Navvab Khajeh-Hosseini-Dalasm et al.
JOURNAL OF POWER SOURCES (2014)
A new model for thermal contact resistance between fuel cell gas diffusion layers and bipolar plates
Hamidreza Sadeghifar et al.
JOURNAL OF POWER SOURCES (2014)
Effect of Polytetrafluoroethylene (PTFE) and micro porous layer (MPL) on thermal conductivity of fuel cell gas diffusion layers: Modeling and experiments
Hamidreza Sadeghifar et al.
JOURNAL OF POWER SOURCES (2014)
Deformation of PEM fuel cell gas diffusion layers under compressive loading: An analytical approach
Vahid Norouzifard et al.
JOURNAL OF POWER SOURCES (2014)
A review of thermoplastic composites for bipolar plate applications
Fatma Gul Boyaci San et al.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2013)
Effect of local stress concentration near the rib edge on water and electron transport phenomena in polymer electrolyte fuel cell
Daisuke Kanda et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2013)
A study of the effect of compression on the performance of polymer electrolyte fuel cells using electrochemical impedance spectroscopy and dimensional change analysis
Thomas J. Mason et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2013)
Coupled mechanical stress and multi-dimensional CFD analysis for high temperature proton exchange membrane fuel cells (HT-PEMFCs)
Purushothama Chippar et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2013)
Gas diffusion layer deformation and its effect on the transport characteristics and performance of proton exchange membrane fuel cell
Yibo Zhou et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2013)
A statistically-based thermal conductivity model for fuel cell Gas Diffusion Layers
Hamidreza Sadeghifar et al.
JOURNAL OF POWER SOURCES (2013)
The Effect of Inhomogeneous Compression on Water Transport in the Cathode of a Proton Exchange Membrane Fuel Cell
Anders C. Olesen et al.
JOURNAL OF FUEL CELL SCIENCE AND TECHNOLOGY (2012)
Determining the effective thermal conductivity of compressed PEMFC GDLs through thermal resistance modelling
J. Yablecki et al.
JOURNAL OF POWER SOURCES (2012)
Effect of clamping pressure on ohmic resistance and compression of gas diffusion layers for polymer electrolyte fuel cells
Thomas J. Mason et al.
JOURNAL OF POWER SOURCES (2012)
Single phase through-plane permeability of carbon paper gas diffusion layers
A. Tamayol et al.
JOURNAL OF POWER SOURCES (2012)
A Numerical Study of Structural Change and Anisotropic Permeability in Compressed Carbon Cloth Polymer Electrolyte Fuel Cell Gas Diffusion Layers
P. Rama et al.
FUEL CELLS (2011)
Through-Plane Thermal Conductivity of PEMFC Porous Transport Layers
Odne S. Burheim et al.
JOURNAL OF FUEL CELL SCIENCE AND TECHNOLOGY (2011)
A novel approach to determine the in-plane thermal conductivity of gas diffusion layers in proton exchange membrane fuel cells
E. Sadeghi et al.
JOURNAL OF POWER SOURCES (2011)
Optimization of polytetrafluoroethylene content in cathode gas diffusion layer by the evaluation of compression effect on the performance of a proton exchange membrane fuel cell
Hao-Ming Chang et al.
JOURNAL OF POWER SOURCES (2011)
Effective thermal conductivity and thermal contact resistance of gas diffusion layers in proton exchange membrane fuel cells. Part 1: Effect of compressive load
E. Sadeghi et al.
JOURNAL OF POWER SOURCES (2011)
Stress Analysis of Proton Exchange Membrane Fuel Cell
Kurniawan Miftah et al.
ADVANCES IN MECHANICAL ENGINEERING, PTS 1-3 (2011)
Estimating effective thermal conductivity in carbon paper diffusion media
Nada Zamel et al.
CHEMICAL ENGINEERING SCIENCE (2010)
Investigation of Channel-to-Channel Cross Convection in Serpentine Flow Fields
D. Tehlar et al.
FUEL CELLS (2010)
Design and manufacturing of end plates of a 5 kW PEM fuel cell
S. Asghari et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)
A high efficient assembly technique for large proton exchange membrane fuel cell stacks: Part II. Applications
P. Lin et al.
JOURNAL OF POWER SOURCES (2010)
Effective thermal conductivity and thermal contact resistance of gas diffusion layers in proton exchange membrane fuel cells. Part 2: Hysteresis effect under cyclic compressive load
E. Sadeghi et al.
JOURNAL OF POWER SOURCES (2010)
A high efficient assembly technique for large PEMFC stacks Part I. Theory
P. Lin et al.
JOURNAL OF POWER SOURCES (2009)
Characterisation of mechanical behaviour and coupled electrical properties of polymer electrolyte membrane fuel cell gas diffusion layers
J. Kleemann et al.
JOURNAL OF POWER SOURCES (2009)
Determination of Material Properties of Gas Diffusion Layers: Experiments and Simulations Using Phase Contrast Tomographic Microscopy
Juergen Becker et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2009)
Thermal conductivity and contact resistance of compressed gas diffusion layer of PEM fuel cell
I. Nitta et al.
FUEL CELLS (2008)
Modelling the Effect of Inhomogeneous Compression of GDL on Local Transport Phenomena in a PEM Fuel Cell
I. Nitta et al.
FUEL CELLS (2008)
Effect of GDL permeability on water and thermal management in PEMFCs - I. Isotropic and anisotropic permeability
Dewan Hasan Ahmed et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2008)
Effect of anisotropic thermal conductivity of the GDL and current collector rib width on two-phase transport in a PEM fuel cell
Chaitanya J. Bapat et al.
JOURNAL OF POWER SOURCES (2008)
Analytic determination of the effective thermal conductivity of PEM fuel cell gas diffusion layers
E. Sadeghi et al.
JOURNAL OF POWER SOURCES (2008)
A numerical investigation of the effects of compression force on PEM fuel cell performance
Z. Y. Su et al.
JOURNAL OF POWER SOURCES (2008)
Stress and plastic deformation of MEA in fuel cells - Stresses generated during cell assembly
Danfil Bograchev et al.
JOURNAL OF POWER SOURCES (2008)
Inhomogeneous compression of PEMFC gas diffusion layer - Part II. Modeling the effect
Tero Hottinen et al.
JOURNAL OF POWER SOURCES (2007)
Inhomogeneous compression of PEMFC gas diffusion layer Part I. Experimental
Iwao Nitta et al.
JOURNAL OF POWER SOURCES (2007)
Research progress of aluminium alloy endplates for PEMFCs
Yu Fu et al.
JOURNAL OF POWER SOURCES (2007)
Effect of clamping pressure on the performance of a PEM fuel cell
W. R. Chang et al.
JOURNAL OF POWER SOURCES (2007)
Effect of compression on liquid water transport and microstructure of PEMFC gas diffusion layers
A. Bazylak et al.
JOURNAL OF POWER SOURCES (2007)
Influence of clamping force on the performance of PEMFCs
P. Zhou et al.
JOURNAL OF POWER SOURCES (2007)
Experimental characterization of in-plane permeability of gas diffusion layers
J. P. Feser et al.
JOURNAL OF POWER SOURCES (2006)
Estimation of contact resistance in proton exchange membrane fuel cells
Lianhong Zhang et al.
JOURNAL OF POWER SOURCES (2006)
In-plane and through-plane gas permeability of carbon fiber electrode backing layers
Jeff T. Gostick et al.
JOURNAL OF POWER SOURCES (2006)
Effective thermal conductivity of rough spherical packed beds
Majid Bahrami et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2006)
Analyses of the fuel cell stack assembly pressure
SJ Lee et al.
JOURNAL OF POWER SOURCES (2005)
Flooding of gas diffusion backing in PEFCs - Physical and electrochemical characterization
J Ihonen et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2004)
Measurement and prediction of electrical contact resistance between gas diffusion layers and bipolar plate for applications to PEM fuel cells
V. Mishra et al.
JOURNAL OF FUEL CELL SCIENCE AND TECHNOLOGY (2004)
Stainless steel as bipolar plate material for polymer electrolyte membrane fuel cells
HL Wang et al.
JOURNAL OF POWER SOURCES (2003)
Stainless steel as a bipolar plate material for solid polymer fuel cells
DP Davies et al.
JOURNAL OF POWER SOURCES (2000)