Modeling molten droplet spreading and infiltration into non-isothermal thermal barrier coatings

Molten calcium-magnesium-alumino-silicate (CMAS) droplets impact and infiltrate porous thermal bar-rier coatings (TBCs) of gas turbines, thereby causing loss of strain tolerance and delamination of the ceramic topcoat. To develop efficient mitigation strategies, it is crucial to understand CMAS infiltration dynamics into the porous topcoat. An integrated model is introduced incorporating simultaneous droplet spreading, wetting interactions, heat transfer, and liquid infiltration with temperature-dependent vis-cosities in unsaturated porous media. The model is applied to CMAS droplet interactions with homo-geneous/heterogeneous anisotropic TBC topcoats grown by the electron beam physical vapor deposition (EB-PVD) method. Simulation results show that the droplet height and contact diameter dynamics ex-hibit three stages -initial-stage fast decrease, slow quasi-linear intermediate decrease, and late-stage fast decrease. The first two stages are dominated by the dynamics of infiltration. The initial temperature of the droplet has insignificant effect on the infiltration dynamics. Rather, the temperature gradient in the topcoat is critical to the infiltration rate. The anisotropy determines the final infiltration diameter and depth. Further, bilayer and multilayer coating structures with alternating fine and coarse columns can delay the infiltration rate and promote lateral spreading during the early stage of the droplet infiltra-tion compared to single-layer structures. The results demonstrate that heterogeneous structures provide a viable approach to mitigate fast infiltration and reduce damage to the TBCs during the early stage of droplet infiltration. (c) 2021 Elsevier Ltd. All rights reserved.

Automated summary

This study investigates the dynamics of CMAS droplets infiltrating porous thermal barrier coatings, finding that the temperature gradient in the coating is critical to the infiltration rate, and heterogeneous structures can reduce damage to the coatings.