相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Phase-field modeling of fracture in heterogeneous materials: jump conditions, convergence and crack propagation
Arne Claus Hansen-Doerr et al.
ARCHIVE OF APPLIED MECHANICS (2021)
A numerical study into element type and mesh resolution for crystal plasticity finite element modeling of explicit grain structures
William G. Feather et al.
COMPUTATIONAL MECHANICS (2021)
A concurrent atomistic-crystal plasticity multiscale model for crack propagation in crystalline metallic materials
Subhendu Chakraborty et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2021)
Efficient Experimental and Data-Centered Workflow for Microstructure-Based Fatigue Data Towards a Data Basis for Predictive AI Models
A. R. Durmaz et al.
EXPERIMENTAL MECHANICS (2021)
An efficient phase-field model for fatigue fracture in ductile materials
Martha Seiler et al.
ENGINEERING FRACTURE MECHANICS (2020)
Investigation of Size Effects Due to Different Cooling Rates of As-Quenched Martensite Microstructures in a Low-Alloy Steel
Marius Graf et al.
APPLIED SCIENCES-BASEL (2020)
Nucleation and propagation modeling of short fatigue crack in rolled bi-modal Ti-6Al-4V alloy
Fabien Briffod et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Fast methods for computing centroidal Laguerre tessellations for prescribed volume fractions with applications to microstructure generation of polycrystalline materials
Jannick Kuhn et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2020)
Numerical Evaluation of Surface Roughness Influences on Cold Formability of Dual-Phase Steel
Peerapon Wechsuwanmanee et al.
STEEL RESEARCH INTERNATIONAL (2020)
Automated Quantitative Analyses of Fatigue-Induced Surface Damage by Deep Learning
Akhil Thomas et al.
MATERIALS (2020)
Micromechanical modeling of fatigue crack initiation in hydrogen atmosphere
Nikolai Arnaudov et al.
MECHANICS OF MATERIALS (2020)
Micromechanical Modelling of the Cyclic Deformation Behavior of Martensitic SAE 4150-A Comparison of Different Kinematic Hardening Models
Benjamin J. Schaefer et al.
METALS (2019)
A surface roughness based damage index for predicting future propagation path of microstructure-sensitive crack in pure nickel
Jalal Fathi Sola et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Microstructurally-sensitive fatigue crack growth in HCP, BCC and FCC polycrystals
David Wilson et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2019)
Predicting Microstructure-Sensitive Fatigue-Crack Path in 3D Using a Machine Learning Framework
Kyle Pierson et al.
JOM (2019)
Micromechanical Modelling of the Influence of Strain Ratio on Fatigue Crack Initiation in a Martensitic Steel-A Comparison of Different Fatigue Indicator Parameters
Benjamin Josef Schaefer et al.
MATERIALS (2019)
Modelling the surface roughness influence on the hole expansion ratio of multiphase steel
S. Munstermann et al.
38TH INTERNATIONAL DEEP DRAWING RESEARCH GROUP ANNUAL CONFERENCE (IDDRG 2019) (2019)
Modelling intergranular and transgranular micro-cracking in polycrystalline materials
V. Gulizzi et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2018)
Initiation and growth of short fatigue cracks in austenitic Sanicro 25 steel
V. Mazanova et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2018)
Numerical investigation of the influence of rolling texture and microstructure on fatigue crack initiation in BCC polycrystals
Fabien Briffod et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Crystal plasticity simulation of the effect of grain size on the fatigue behavior of polycrystalline Inconel 718
A. Cruzado et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
A method to numerically predict the loading ratio dependency of long crack propagation rates under cyclic loading
Karl Gillner et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Calculation of the Wohler (S-N) curve using a two-scale model
M. Mlikota et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Microstructure-based fatigue life model of metallic alloys with bilinear Coffin-Manson behavior
A. Cruzado et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Using machine learning and a data-driven approach to identify the small fatigue crack driving force in polycrystalline materials
Andrea Rovinelli et al.
NPJ COMPUTATIONAL MATERIALS (2018)
A microstructure-sensitive driving force for crack growth
David Wilson et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2018)
Nonuniqueness of the fatigue threshold
S. Alkan et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Underlying interstitial carbon concentration dependence of transgranular fatigue crack resistance in Fe-C ferritic steels: The kinetic effect viewpoint
Bochuan Li et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Micromechanical modeling of fatigue crack initiation in polycrystals
Martin Boeff et al.
JOURNAL OF MATERIALS RESEARCH (2017)
Microstructure modeling and crystal plasticity simulations for the evaluation of fatigue crack initiation in α-iron specimen including an elliptic defect
Fabien Briffod et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Numerical analysis on the local mechanical fields in polycrystalline 316LN stainless steel under cyclic fatigue loading: Comparison with experimental results
S. Basseville et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Combining Single- and Poly-Crystalline Measurements for Identification of Crystal Plasticity Parameters: Application to Austenitic Stainless Steel
Samir El Shawish et al.
CRYSTALS (2017)
Diffusion-coupled cohesive interface simulations of stress corrosion intergranular cracking in polycrystalline materials
Chao Pu et al.
ACTA MATERIALIA (2017)
Quantitative analysis of surface roughness evolution in FCC polycrystalline metal during uniaxial tension
Lei Zhang et al.
COMPUTATIONAL MATERIALS SCIENCE (2017)
Simulating the effect of grain boundaries on microstructurally small fatigue crack growth from a focused ion beam notch through a three-dimensional array of grains
William D. Musinski et al.
ACTA MATERIALIA (2016)
Experimental evidence and physical models of fatigue crack initiation
Jaroslav Polak et al.
INTERNATIONAL JOURNAL OF FATIGUE (2016)
3D simulation of short fatigue crack propagation by finite element crystal plasticity and remeshing
H. Proudhon et al.
INTERNATIONAL JOURNAL OF FATIGUE (2016)
On the robustness of an inverse optimization approach based on the Levenberg-Marquardt method for the mechanical behavior of polycrystals
V. Herrera-Solaz et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2015)
Small-Scale Multiaxial Setup for Damage Detection Into the Very High Cycle Fatigue Regime
T. Straub et al.
EXPERIMENTAL MECHANICS (2015)
Investigation of slip system activity in iron at room temperature by SEM and AFM in-situ tensile and compression tests of iron single crystals
P. Franciosi et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2015)
Crystallographic analysis of slip transfer mechanisms across the ferrite/cementite interface in carbon steels with fine lamellar structure
L. E. Karkina et al.
JOURNAL OF APPLIED CRYSTALLOGRAPHY (2015)
Grain boundaries and interfaces in slip transfer
T. R. Bieler et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2014)
Prediction of damage-growth based fatigue life of polycrystalline materials using a microstructural modeling approach
M. Sistaninia et al.
INTERNATIONAL JOURNAL OF FATIGUE (2014)
Mesoscale modeling of microstructurally small fatigue cracks in metallic polycrystals
Gustavo M. Castelluccio et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Cohesive element approach to grain level modelling of intergranular cracking
Igor Simonovski et al.
ENGINEERING FRACTURE MECHANICS (2013)
Microstructural fatigue mechanisms: Cyclic slip irreversibility, crack initiation, non-linear elastic damage analysis
Hael Mughrabi
INTERNATIONAL JOURNAL OF FATIGUE (2013)
Microstructure-sensitive HCF and VHCF simulations
Craig P. Przybyla et al.
INTERNATIONAL JOURNAL OF FATIGUE (2013)
Assessment of small fatigue crack growth driving forces in single crystals with and without slip bands
Gustavo M. Castelluccio et al.
INTERNATIONAL JOURNAL OF FRACTURE (2012)
A physically based fatigue model for prediction of crack initiation from persistent slip bands in polycrystals
Michael D. Sangid et al.
ACTA MATERIALIA (2011)
Large-scale 3D random polycrystals for the finite element method: Generation, meshing and remeshing
R. Quey et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2011)
Grain detection from 2d and 3d EBSD data-Specification of the MTEX algorithm
Florian Bachmann et al.
ULTRAMICROSCOPY (2011)
Numerical modelling of fatigue crack initiation of martensitic steel
S. Glodez et al.
ADVANCES IN ENGINEERING SOFTWARE (2010)
Microstructure-sensitive computational modeling of fatigue crack formation
D. L. McDowell et al.
INTERNATIONAL JOURNAL OF FATIGUE (2010)
Effect of non-metallic inclusions on hydrogen-induced cracking of API5L X100 steel
T. Y. Jin et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)
Extrusions and intrusions in fatigued metals. Part 1. State of the art and history
J. Man et al.
PHILOSOPHICAL MAGAZINE (2009)
Modelling of short crack propagation -: Transition from stage I to stage II
B. Kuenkler et al.
ENGINEERING FRACTURE MECHANICS (2008)
Estimating fatigue sensitivity to polycrystalline Ni-base superalloy microstructures using a computational approach
M. Shenoy et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2007)
Comparative assessment of dissipated energy and other fatigue criteria
Alexander M. Korsunsky et al.
INTERNATIONAL JOURNAL OF FATIGUE (2007)
Ensemble averaging stress-strain fields in polycrystalline aggregates with a constrained surface microstructure - Part 1: anisotropic elastic behaviour
A. Zeghad et al.
PHILOSOPHICAL MAGAZINE (2007)
Plastic strain-controlled short crack growth and fatigue life
J Polák
INTERNATIONAL JOURNAL OF FATIGUE (2005)
High- and low-cycle fatigue crack initiation using polycrystal plasticity
A Manonukul et al.
PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2004)
Modelling the optimum grain size on the low cycle fatigue life of a Ni based superalloy in the presence of two possible crack initiation sites
F Alexandre et al.
SCRIPTA MATERIALIA (2004)
A crystallographic mechanism for fatigue crack propagation through grain boundaries
T Zhai et al.
ACTA MATERIALIA (2000)
分享论文
