相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Evaluation of the matrix crack number in carbon fiber reinforced plastics using linear and nonlinear acousto-ultrasonic detections
Rong Wang et al.
COMPOSITE STRUCTURES (2021)
Novel method for in situ damage monitoring during ultrasonic fatigue testing by the advanced acoustic emission technique
M. Seleznev et al.
INTERNATIONAL JOURNAL OF FATIGUE (2021)
Evaluation of material degradation using phased array ultrasonic technique with full matrix capture
Santhakumar Sampath et al.
ENGINEERING FAILURE ANALYSIS (2021)
A nonlinear ultrasonic method for real-time bolt looseness monitoring using PZT transducer-enabled vibro-acoustic modulation
Nan Zhao et al.
JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2020)
Estimation of remaining useful life of fatigued plate specimens using Lamb wave-based nonlinearity parameters
Peter Tse et al.
STRUCTURAL CONTROL & HEALTH MONITORING (2020)
Mode-mixing-induced second harmonic A0 mode Lamb wave for local incipient damage inspection
Shengbo Shan et al.
SMART MATERIALS AND STRUCTURES (2020)
Nonlinear Lamb Wave Micro-Crack Direction Identification in Plates with Mixed-Frequency Technique
Liqiang Guan et al.
APPLIED SCIENCES-BASEL (2020)
Numerical and Experimental Investigation of Nonlinear Lamb Wave Mixing at Low Frequency
Mohammed Aslam et al.
JOURNAL OF AEROSPACE ENGINEERING (2020)
Nonlinear ultrasonic detection for evaluating fatigue crack in metal plate
Rong Wang et al.
STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2019)
Online fatigue crack prognosis using nonlinear ultrasonic modulation
Hyung Jin Lim et al.
STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2019)
A Study on Fatigue State Evaluation of Rail by the Use of Ultrasonic Nonlinearity
Bo Zhu et al.
MATERIALS (2019)
Experimental and numerical investigations of nonlinear interaction of counter-propagating Lamb waves
Maoxun Sun et al.
APPLIED PHYSICS LETTERS (2019)
Nonlinear ultrasonic modulation based failure warning for aluminum plates subject to fatigue loading
Yongtak Kim et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Use of non-destructive testing methods in a new one-specimen test strategy for the estimation of fatigue data
P. Starke et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Contact acoustic nonlinearity (CAN)-based continuous monitoring of bolt loosening: Hybrid use of high-order harmonics and spectral sidebands
Zhen Zhang et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2018)
Mixing of ultrasonic Lamb waves in thin plates with quadratic nonlinearity
Feilong Li et al.
ULTRASONICS (2018)
Influence of modal characteristics of a partially debonded piezoelectric transducer in higher and subharmonic modes generated in Lamb wave
Anurup Guha et al.
STRUCTURAL CONTROL & HEALTH MONITORING (2018)
Reflection of ultrasound from a region of cubic material nonlinearity due to harmonic generation
Yanzheng Wang et al.
ACTA MECHANICA (2018)
Mode mixing in shear horizontal ultrasonic guided waves
P. A. Petcher et al.
NONDESTRUCTIVE TESTING AND EVALUATION (2017)
Higher harmonic generation of guided waves at delaminations in laminated composite beams
Reza Soleimanpour et al.
STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2017)
Nonlinear Lamb wave-mixing technique for micro-crack detection in plates
Jiao Jingpin et al.
NDT & E INTERNATIONAL (2017)
Fatigue crack evaluation using the non-collinear wave mixing technique
Jingpin Jiao et al.
SMART MATERIALS AND STRUCTURES (2017)
Second harmonic generation in composites: Theoretical and numerical analyses
Jinling Zhao et al.
JOURNAL OF APPLIED PHYSICS (2016)
The effect of cubic material nonlinearity on the propagation of torsional wave modes in a pipe
Yanzheng Wang et al.
JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA (2016)
Development and field application of a nonlinear ultrasonic modulation technique for fatigue crack detection without reference data from an intact condition
Hyung Jin Lim et al.
SMART MATERIALS AND STRUCTURES (2016)
Crack propagation monitoring in a full-scale aircraft fatigue test based on guided wave-Gaussian mixture model
Lei Qiu et al.
SMART MATERIALS AND STRUCTURES (2016)
Analytical and numerical modeling of non-collinear shear wave mixing at an imperfect interface
Ziyin Zhang et al.
ULTRASONICS (2016)
Effects of loading and sample geometry on acoustic emission generation during fatigue crack growth: Implications for structural health monitoring
D. Gagar et al.
INTERNATIONAL JOURNAL OF FATIGUE (2015)
Identification of cracks in thin-walled structures by means of wavenumber filtering
Pawel Kudela et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2015)
Evaluation of the intergranular corrosion in austenitic stainless steel using collinear wave mixing method
Jiao Jingpin et al.
NDT & E INTERNATIONAL (2015)
2D finite element modeling of the non-collinear mixing method for detection and characterization of closed cracks
P. Blanloeuil et al.
NDT & E INTERNATIONAL (2015)
Relationship between second- and third-order acoustic nonlinear parameters in relative measurement
Gang Ren et al.
ULTRASONICS (2015)
Detecting Localized Plastic Strain by a Scanning Collinear Wave Mixing Method
Guangxin Tang et al.
JOURNAL OF NONDESTRUCTIVE EVALUATION (2014)
Micro-crack detection using a collinear wave mixing technique
Jingpin Jiao et al.
NDT & E INTERNATIONAL (2014)
Acousto-ultrasonics-based fatigue damage characterization: Linear versus nonlinear signal features
Zhongqing Su et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2014)
Noncollinear wave mixing for measurement of dynamic processes in polymers: Physical ageing in thermoplastics and epoxy cure
A. Demcenko et al.
ULTRASONICS (2014)
Microstructural Characterization in Plates Using Guided Wave Third Harmonic Generation
Yang Liu et al.
40TH ANNUAL REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION: INCORPORATING THE 10TH INTERNATIONAL CONFERENCE ON BARKHAUSEN NOISE AND MICROMAGNETIC TESTING, VOLS 33A & 33B (2014)
Non-collinear wave mixing for non-linear ultrasonic detection of physical ageing in PVC
A. Demcenko et al.
NDT & E INTERNATIONAL (2012)
Fatigue crack growth monitoring in aluminum using acoustic emission and acousto-ultrasonic methods
Ahmed Maslouhi
STRUCTURAL CONTROL & HEALTH MONITORING (2011)
Creep damage characterization using non-linear ultrasonic techniques
Jitendra S. Valluri et al.
ACTA MATERIALIA (2010)
Application of the bispectrum for detection of small nonlinearities excited sinusoidally
C. R. P. Courtney et al.
JOURNAL OF SOUND AND VIBRATION (2010)
Fracture and damage mechanics modelling of thin-walled structures - An overview
Uwe Zerbst et al.
ENGINEERING FRACTURE MECHANICS (2009)
Ultrasonic detection of fretting fatigue damage at bolt joints of aluminum alloy plates
Sanat Wagle et al.
INTERNATIONAL JOURNAL OF FATIGUE (2009)
Nonlinear Ultrasonic Techniques for Non-destructive Assessment of Micro Damage in Material: A Review
Kyung-Young Jhang
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2009)
The use of non-collinear mixing for nonlinear ultrasonic detection of plasticity and fatigue
Anthony J. Croxford et al.
JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA (2009)
A nonlinear-guided wave technique for evaluating plasticity-driven material damage in a metal plate
C. Pruell et al.
NDT & E INTERNATIONAL (2009)
Higher harmonic analysis of ultrasonic signal for ageing behaviour study of C-250 grade maraging steel
Avijit Metya et al.
NDT & E INTERNATIONAL (2008)
Nonlinear Lamb waves for the detection of material nonlinearity
Christian Bermes et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2008)
Experimental characterization of fatigue damage in a nickel-base superalloy using nonlinear ultrasonic waves
Jin-Yeon Kim et al.
JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA (2006)
Assessment of material damage in a nickel-base superalloy using nonlinear Rayleigh surface waves
Jan Herrmann et al.
JOURNAL OF APPLIED PHYSICS (2006)
Acoustic nonlinearity parameter due to microplasticity
J. -Y. Kim et al.
JOURNAL OF NONDESTRUCTIVE EVALUATION (2006)
Substructural organization, dislocation plasticity and harmonic generation in cyclically stressed wavy slip metals
JH Cantrell
PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2004)
分享论文
