4.4 Article

Corrosion Behavior of Bismuth in Concentrated Sulphuric Acid Solution and Stability of its Surface Oxide Film

出版社

ESG
DOI: 10.20964/2022.01.23

关键词

Bismuth; cyclic voltammetry; EIS; polarization; SEM

向作者/读者索取更多资源

The surface activity of bismuth in sulfuric acid solution was investigated using CV, potentiodynamic polarization, and EIS measurements. Results showed that the protective film formed on the surface of bismuth had high ionic character, and the current values increased with the scan rate. Additionally, the corrosion rate of bismuth in the acid solution increased with the polarization temperature.
The surface activity of bismuth (Bi) was investigated in 4.97 M H2SO4 solution using cyclic voltammetry (CV), potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) measurements. The CV results indicated that the current plateau values increase as the scan rate increases. This may be caused by the high ionic character of the protective film formed on Bi surface. From the EIS results it was found that the thickness of each of the pre-immersion oxide and the anodically formed film on Bi decreases with increasing of the immersion time due to their dissolution in the acid medium. Polarization scans showed that the rate of corrosion of Bi in the acid solution rises as the polarization temperature increases. The values of the thermodynamic parameters E-a (activation energy), Delta H (enthalpy change) and Delta S (entropy change) of the corrosion process for Bi in the concentrated sulphuric acid solution were estimated. The surface of bismuth was demonstrated under scanning electron microscopy (SEM) after polishing and polarization in sulphuric acid as well as at the end of the EIS measurements (at 70 min).

作者

我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。

评论

主要评分

4.4
评分不足

次要评分

新颖性
-
重要性
-
科学严谨性
-
评价这篇论文

推荐

暂无数据
暂无数据