相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Effect of airflow channel arrangement on the discharge of a composite metal foam-phase change material heat exchanger
Pouyan Talebizadehsardari et al.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2021)
Conjugate heat transfer in anisotropic woven metal fiber-phase change material composite
Qinlong Ren et al.
APPLIED THERMAL ENGINEERING (2021)
Localized heating element distribution in composite metal foam-phase change material: Fourier's law and creeping flow effects
Pouyan Talebizadeh Sardari et al.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2021)
Numerical study on the performance of shell-and-tube thermal energy storage using multiple PCMs and gradient copper foam
Liang Pu et al.
RENEWABLE ENERGY (2021)
A comprehensive review of heat transfer intensification methods for latent heat storage units
Raja Elarem et al.
ENERGY STORAGE (2021)
Thermal performance evaluation of non-uniform fin array in a finned double-pipe latent heat storage system
Amin Shahsavar et al.
ENERGY (2020)
Improved PCM melting in a thermal energy storage system of double-pipe helical-coil tube
Mustafa S. Mahdi et al.
ENERGY CONVERSION AND MANAGEMENT (2020)
Conjugate solid-liquid phase change heat transfer in heatsink filled with phase change material-metal foam
Mohammad Ghalambaz et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)
Enhancing the thermal response of a latent heat storage system for suppressing temperature fluctuation of dusty flue gas
Song-Zhen Tang et al.
APPLIED ENERGY (2020)
High-temperature phase change materials for short-term thermal energy storage in the solar receiver: Selection and analysis
Muhammad Anser Bashir et al.
JOURNAL OF ENERGY STORAGE (2020)
Durability of phase-change-material module and its relieving effect on battery deterioration during long-term cycles
Youfu Lv et al.
APPLIED THERMAL ENGINEERING (2020)
Experimental and numerical assessments of thermal transport in fins and metal foam infused latent heat thermal energy storage systems: A comparative evaluation
Varun Joshi et al.
APPLIED THERMAL ENGINEERING (2020)
Partial cycle operation of latent heat storage with finned tubes
Georg Scharinger-Urschitz et al.
APPLIED ENERGY (2020)
Hybrid thermal performance enhancement of a circular latent heat storage system by utilizing partially filled copper foam and Cu/GO nano-additives
Seyed Mohsen Hashem Zadeh et al.
ENERGY (2020)
Influence of the storage period between charge and discharge in a latent heat thermal energy storage system working under partial load operating conditions
Jaume Gasia et al.
APPLIED ENERGY (2019)
Effect of inclination on the thermal response of composite phase change materials for thermal energy storage
Xiaohu Yang et al.
APPLIED ENERGY (2019)
Charging nanoparticle enhanced bio-based PCM in open cell metallic foams: An experimental investigation
M. Al-Jethelah et al.
APPLIED THERMAL ENGINEERING (2019)
Numerical investigation of the influence of mushy zone parameter Amush on heat transfer characteristics in vertically and horizontally oriented thermal energy storage systems
Mohamed Fadl et al.
APPLIED THERMAL ENGINEERING (2019)
Lithium-ion battery thermal management using heat pipe and phase change material during discharge-charge cycle: A comprehensive numerical study
Z. Y. Jiang et al.
APPLIED ENERGY (2019)
A critical review on heat transfer augmentation of phase change materials embedded with porous materials/foams
Tauseef-ur-Rehman et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)
Intermittent Renewable Energy Sources: The Role of Energy Storage in the European Power System of 2040
Henrik Zsiboracs et al.
ELECTRONICS (2019)
Thermal transport augmentation in latent heat thermal energy storage system by partially filled metal foam: A novel configuration
Varun Joshi et al.
JOURNAL OF ENERGY STORAGE (2019)
Thermal Performance of a PCM-Based Thermal Energy Storage with Metal Foam Enhancement
Xue Chen et al.
ENERGIES (2019)
Integrating Two-Stage Phase Change Material Thermal Storage for Cascaded Waste Heat Recovery of Diesel-Engine-Powered Distributed Generation Systems: A Case Study
Dacheng Li et al.
ENERGIES (2019)
Thermal performance augmentation of metal foam infused phase change material using a partial filling strategy: An evaluation for fill height ratio and porosity
Varun Joshi et al.
APPLIED ENERGY (2019)
Melting and solidification characteristics of a double-pipe latent heat storage system with sinusoidal wavy channels embedded in a porous medium
Amin Shahsavar et al.
ENERGY (2019)
Enhancement of nanoparticle-phase change material melting performance using a sinusoidal heat pipe
Qinlong Ren
ENERGY CONVERSION AND MANAGEMENT (2019)
Numerical study of a multiple-segment metal foam-PCM latent heat storage unit: Effect of porosity, pore density and location of heat source
Pouyan Talebizadeh Sardari et al.
ENERGY (2019)
Applications of combined/hybrid use of heat pipe and phase change materials in energy storage and cooling systems: A recent review
Hafiz Muhammad Ali
JOURNAL OF ENERGY STORAGE (2019)
A numerical investigation of the effects of metal foam characteristics and heating/cooling conditions on the phase change kinetic of phase change materials embedded in metal foam
El Idi Mohamed Moussa et al.
JOURNAL OF ENERGY STORAGE (2019)
Use of partial load operating conditions for latent thermal energy storage management
Jaume Gasia et al.
APPLIED ENERGY (2018)
Thermal performance of copper foam/paraffin composite phase change material
Huanpei Zheng et al.
ENERGY CONVERSION AND MANAGEMENT (2018)
Melting of nano-PCM inside a cylindrical thermal energy storage system: Numerical study with experimental verification
Soroush Ebadi et al.
ENERGY CONVERSION AND MANAGEMENT (2018)
Experimental investigation of PCM based round pin-fin heat sinks for thermal management of electronics: Effect of pin-fin diameter
Adeel Arshad et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)
Fe3O4-Ethylene glycol nanofluid forced convection inside a porous enclosure in existence of Coulomb force
M. Sheikholeslami et al.
JOURNAL OF MOLECULAR LIQUIDS (2018)
Smart grid and energy storage: Policy recommendations
Kenneth K. Zame et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)
Analyses of Bio-Based Nano-PCM filled Concentric Cylindrical Energy Storage System in Vertical Orientation
Muath Alomair et al.
JOURNAL OF ENERGY STORAGE (2018)
Techno-economic analysis of a concentrating solar collector with built-in shell and tube latent heat thermal energy storage
Qiyuan Li et al.
ENERGY (2017)
Solidification enhancement in a triplex-tube latent heat energy storage system using nanoparticles-metal foam combination
Jasim M. Mahdi et al.
ENERGY (2017)
Melting behaviors of PCM in porous metal foam characterized by fractal geometry
Zilong Deng et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)
Convection heat transfer in micropolar nanofluids with oxide nanoparticles in water, kerosene and engine oil
Abid Hussanan et al.
JOURNAL OF MOLECULAR LIQUIDS (2017)
Heat transfer study of phase change materials with graphene nano particle for thermal energy storage
Karunesh Kant et al.
SOLAR ENERGY (2017)
Melting enhancement in triplex-tube latent heat energy storage system using nanoparticles-metal foam combination
Jasim M. Mahdi et al.
APPLIED ENERGY (2017)
Evaluation and optimization of melting performance for a latent heat thermal energy storage unit partially filled with porous media
Yang Xu et al.
APPLIED ENERGY (2017)
Melting heat transfer characteristics of a composite phase change material fabricated by paraffin and metal foam
P. Zhang et al.
APPLIED ENERGY (2017)
A comparative study of thermal behaviour of a horizontal and vertical shell-and-tube energy storage using phase change materials
Saeid Seddegh et al.
APPLIED THERMAL ENGINEERING (2016)
On the effective thermal conductivity of aluminum metal foams: Review and improvement of the available empirical and analytical models
Paola Ranut
APPLIED THERMAL ENGINEERING (2016)
Thermal analysis of melting and freezing processes of phase change materials (PCMs) based on dynamic DSC test
Lu Li et al.
ENERGY AND BUILDINGS (2016)
Specific heat control of nanofluids: A critical review
Hamed Riazi et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2016)
Design and feasibility of high temperature shell and tube latent heat thermal energy storage system for solar thermal power plants
S. Saeed Mostafavi Tehrani et al.
RENEWABLE ENERGY (2016)
Influence of the Mushy Zone Constant on the Numerical Simulation of the Melting and Solidification Process of Phase Change Materials
Michael Hameter et al.
26TH EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING (ESCAPE), PT A (2016)
Development and evaluation of graphite nanoplate (GNP)-based phase change material for energy storage applications
Yoldas Seki et al.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2015)
Experimental and theoretical analysis of an aluminum foam enhanced phase change thermal storage unit
Evan Fleming et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)
Numerical analysis on thermal behavior of solid-liquid phase change within copper foam with varying porosity
Jialin Yang et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)
Numerical model of the passive thermal management system for high-power lithium ion battery by using porous metal foam saturated with phase change material
Z. G. Qu et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)
Melting of PCM in a thermal energy storage unit: Numerical investigation and effect of nanoparticle enhancement
Adriano Sciacovelli et al.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2013)
High-temperature phase change materials for thermal energy storage
Murat M. Kenisarin
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2010)
Heat transfer enhancement for thermal energy storage using metal foams embedded within phase change materials (PCMs)
C. Y. Zhao et al.
SOLAR ENERGY (2010)
Review of convective heat transfer enhancement with nanofluids
Sadik Kakac et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2009)
Convective transport in nanofluids
J Buongiorno
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2006)
Numerical study for enhancing the thermal conductivity of phase change material (PCM) storage using high thermal conductivity porous matrix
O Mesalhy et al.
ENERGY CONVERSION AND MANAGEMENT (2005)