4.6 Article

Surface Spinel-Coated and Polyanion-Doped Co-Free Li-Rich Layered Oxide Cathode for High-Performance Lithium-Ion Batteries

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Applied

Concurrent recycling chemistry for cathode/anode in spent graphite/LiFePO4 batteries: Designing a unique cation/anion-co-workable dual-ion battery

Yun-Feng Meng et al.

Summary: The increasing popularity of new energy electric vehicles has led to a rapid growth in the demand for lithium-ion batteries (LIBs), resulting in a large number of spent LIBs. This study proposes a unique recycling strategy to achieve the concurrent reuse of cathode and anode in spent graphite/LiFePO4 batteries, leading to the development of a sustainable and economical method for designing new-type secondary batteries as recycling of spent LIBs. The recycle-derived DIB of Li/RLFPG exhibits good electrochemical performance, demonstrating the potential of large-scale recycling of spent LIBs in the future.

JOURNAL OF ENERGY CHEMISTRY (2022)

Article Chemistry, Physical

Improving the intrinsic electronic conductivity of NiMoO4 anodes by phosphorous doping for high lithium storage

Luchao Yue et al.

Summary: Heteroatom doping, especially phosphorus doping, significantly improves the electronic conductivity and Li+ diffusion kinetics of NiMoO4 nanorods, leading to high specific capacity, outstanding cycling durability, and impressive rate performance for lithium ion batteries. This work provides a potential strategy for enhancing the intrinsic conductivity of transition metal oxides as high-performance anodes for LIBs.

NANO RESEARCH (2022)

Article Materials Science, Multidisciplinary

TiO2-coated LiNi0.9Co0.08Al0.02O2 cathode materials with enhanced cycle performance for Li-ion batteries

Wei-Wei Li et al.

Summary: In this study, spherical LiNi0.9Co0.08Al0.02O2 powders with 0.4 wt% TiO2 coating layer were prepared by impregnation-hydrolysis method. The TiO2 coating layer effectively improved the cycling performance and stability of the electrode at a high discharge ratio.

RARE METALS (2021)

Article Electrochemistry

Recent advances in lithium-based batteries using metal organic frameworks as electrode materials

Yongchao Jiang et al.

Summary: Metal organic frameworks (MOFs) exhibit excellent electrochemical performance in lithium-based batteries due to their unique properties, and this review summarizes the recent advances and applications of MOFs-based electrode materials for high-performance lithium-ion storage.

ELECTROCHEMISTRY COMMUNICATIONS (2021)

Article Electrochemistry

Degradation identification of LiNi0.8Co0.1Mn0.1O2/graphite lithium-ion batteries under fast charging conditions

Wenlong Xie et al.

Summary: This study investigates the cycle aging of commercial 2.5 Ah 18650 cylindrical lithium-ion batteries with LiNi0.8Co0.1Mn0.1O2(NCM)/graphite chemistry at different charging rates, revealing specific degradation mechanisms and suggesting recommendations for use under fast charging conditions.

ELECTROCHIMICA ACTA (2021)

Article Chemistry, Multidisciplinary

Morphology Control and Na+ Doping toward High-Performance Li-Rich Layered Cathode Materials for Lithium-Ion Batteries

Qian Wang et al.

Summary: The study introduces sodium citrate as a chelating agent to synthesize lithium-rich manganese (LRM) based cathode materials with high structure stability, effectively controlling the morphology of the cathode materials and benefiting Li+ diffusion. The doping of Na+ helps to prevent structure collapse during repeated charge-discharge cycles, greatly enhancing voltage stability and improving lithium storage performance. The novel strategy of morphology design and Na+ doping synergistically increases the rate capacity and voltage retention of LRM cathode materials.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Article Chemistry, Physical

Rational design of carbon materials as anodes for potassium-ion batteries

Yuanming Wu et al.

Summary: This review summarizes the recent advances in rational design of carbon materials for developing anodes for potassium-ion batteries, including practical issues with various carbon materials as anodes, potassium storage mechanisms, and design methods for carbon materials. The ultimate goal is to develop next-generation carbon anodes with high energy density and excellent cycling stability.

ENERGY STORAGE MATERIALS (2021)

Article Chemistry, Multidisciplinary

Ti-Based Surface Integrated Layer and Bulk Doping for Stable Voltage and Long Life of Li-Rich Layered Cathodes

Dong Luo et al.

Summary: The study developed a Ti-based surface integrated layer and bulk doping to improve the voltage and capacity stability of high-energy-density lithium-rich layered oxides. Experimental results showed that this method effectively suppressed surface structure evolution and interfacial reactions, enhancing battery cycling performance.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Electrochemistry

Local structure modulation via cation compositional regulation for durable Li-rich layered cathode materials

Zaijun Chen et al.

Summary: A series of manganese-based lithium-rich layered oxide (LLO) cathode materials with different local structures have been synthesized by adjusting the stoichiometric ratios of Mn/Ni. The cathode material with an Mn/Ni ratio of 7 to 2 (Li1.3Mn0.7Ni0.2Co0.1O2.4, denoted as MNC-721) exhibited superior cycling stability and mass-energy density retention of 90.0% after 300 cycles, indicating promising applications in high-performance Li-ion batteries.

ELECTROCHIMICA ACTA (2021)

Review Chemistry, Physical

A review on progress of lithium-rich manganese-based cathodes for lithium ion batteries

Xueqian Ji et al.

Summary: This review systematically summarizes the lithium storage mechanism of layered lithium-rich manganese-based materials, addressing the challenges of voltage and capacity decay. Various modifications in recent years, including component improvement, coating, doping, and surface treatment, are also discussed. Future research directions and challenges for the development of high performance Li-rich Mn-based materials are presented.

JOURNAL OF POWER SOURCES (2021)

Article Chemistry, Multidisciplinary

Manipulating the Local Electronic Structure in Li-Rich Layered Cathode Towards Superior Electrochemical Performance

Hongfei Zheng et al.

Summary: The research successfully improved the performance of Li-rich layered cathodes by dual-doping Na+ and F- ions, and regulating Li+/Ni2+ intermixing and Li-O-Li configuration, leading to increased battery capacity and cycle life.

ADVANCED FUNCTIONAL MATERIALS (2021)

Review Chemistry, Multidisciplinary

Challenges and Recent Advances in High Capacity Li-Rich Cathode Materials for High Energy Density Lithium-Ion Batteries

Wei He et al.

Summary: Li-rich cathode materials have high reversible discharge capacity, but face issues like low kinetic properties and inefficient voltage fading. Advanced technologies and innovative strategies are being developed to address these challenges and improve the performance of these materials for practical applications.

ADVANCED MATERIALS (2021)

Article Nanoscience & Nanotechnology

Formation of LiF Surface Layer During Direct Fluorination of High-Capacity Co-Free Disordered Rocksalt Cathodes

Yiman Zhang et al.

Summary: This study demonstrates the feasibility of direct fluorination to improve the electrochemical performance of high-voltage cathodes by tuning the material's surface chemistry, leading to the formation of LiF surface films which improve specific energy and capacity retention.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Nanoscience & Nanotechnology

Enhanced Activity and Reversibility of Anionic Redox by Tuning Lithium Vacancies in Li-Rich Cathode Materials

Shihao Li et al.

Summary: Li-rich Mn-based layered oxide cathodes show promise for lithium-ion batteries due to their high-voltage platform and ultrahigh specific capacity, but anionic redox can lead to oxygen release issues. By synthesizing LLO materials with varying lithium vacancy contents, it was found that lithium vacancies are crucial in enhancing anionic redox activity and reversibility.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Nanoscience & Nanotechnology

Microstructure-Controlled Li-Rich Mn-Based Cathodes by a Gas-Solid Interface Reaction for Tackling the Continuous Activation of Li2MnO3

Mengke Zhang et al.

Summary: By treating with NH4HCO3, the release of Li2MnO3 is restricted, oxygen vacancies are introduced, and the cycle stability and capacity of Li1.2Ni0.36Mn0.44O2 cathode material are significantly improved.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Energy & Fuels

Improving the Cycling Stability of Li-Rich Mn-Based Cathodes through Surface Modification of VOPO4

Xin Xie et al.

Summary: Surface modification with VOPO4 has been shown to enhance the electrochemical performance of Li1.2Mn0.54Ni0.13Co0.13O2, reducing surface residual Li+ content, inhibiting structural degradation, and preventing O-2 molecules from escaping during cycling. The modified sample Li1.2Mn0.54Ni0.13Co0.13O2@VOPO4 with 3 wt % VOPO4 exhibited an initial discharge capacity of 260.5 mAh g(-1) and excellent capacity retention of 92% after 100 cycles.

ENERGY & FUELS (2021)

Article Chemistry, Physical

Fe3+ and PO43- co-doped Li-rich Li1.20Mn0.56Ni0.16Co0.08O2 as cathode with outstanding structural stability for Lithium-ion battery

Yabin Xu et al.

Summary: The co-doping of Fe3+ and PO43- improves the electrochemical performance of Li1.20Mn0.56Ni0.16Co0.08O2, showing higher initial coulombic efficiency, excellent cycling stability, and mitigated voltage fade. The synergistic effect of Fe3+ and PO43- constructs a stable oxygen-packed framework, contributing to outstanding structural stability.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Chemistry, Physical

In-situ reconstruction of spinel interface on Li-rich layered cathode with improved electrochemical performances

Panpan Zhang et al.

Summary: The in-situ surface pretreatment technique with hydrazine hydrate is used to reconstruct epitaxial spinel on lithium-rich layered cathode, which significantly enhances the lithium ion diffusion coefficient and improves the stability of the cathode structure. This approach shows promise for future applications of lithium-rich layered cathodes.

JOURNAL OF POWER SOURCES (2021)

Article Electrochemistry

Mg-doped Li-rich vanadium phosphate Li9V3(P2O7)3(PO4)2 as cathode for lithium-ion batteries: electrochemical performance and lithium storage mechanism

Heng Yao et al.

Summary: By doping Mg ions on the Li site, a series of Li9-xMgxV3(P2O7)(3)(PO4)(2) solid solution was successfully synthesized, improving the material's electronic conductivity. However, excessive Mg doping may deteriorate the electrochemical performance. The optimal Mg doping amount was found to be x=0.01 based on the combined effect of conductivity and lithium-ion diffusion coefficient.

JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2021)

Article Chemistry, Multidisciplinary

Cation/Anion Codoped and Cobalt-Free Li-Rich Layered Cathode for High-Performance Li-Ion Batteries

Lu Nie et al.

Summary: This study reports a Fe, Cl co-doped and Co-free Li-rich layered cathode, which significantly improves structural stability, enhances rate performance, and provides a low-cost, environmentally friendly strategy for high-performance cathode materials.

NANO LETTERS (2021)

Article Chemistry, Physical

Ni/Mn and Al Dual Concentration-Gradients To Mitigate Voltage Decay and Capacity Fading of Li-Rich Layered Cathodes

Dong Luo et al.

Summary: The study successfully alleviated the voltage decay and capacity fading issues of LLO cathodes by constructing Co-free LLO microspheres with Ni/Mn and Al dual concentration-gradients, providing a new pathway for their practical application in the near future.

ACS ENERGY LETTERS (2021)

Review Chemistry, Physical

Progress and perspective of metal phosphide/carbon heterostructure anodes for rechargeable ion batteries

Luchao Yue et al.

Summary: Advanced electrode materials, such as metal phosphides, show potential in rechargeable ion batteries due to their high theoretical capacity and proper redox potential. However, volume variation during cycling can lead to capacity retention issues. Constructing metal phosphide-carbon heterostructures using nanocarbon's bifunctional features offers a promising solution to address this challenge.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Chemistry, Physical

Constructing a hollow microflower-like ZnS/CuS@C heterojunction as an effective ion-transport booster for an ultrastable and high-rate sodium storage anode

Wenxi Zhao et al.

Summary: Hierarchical heterostructure coupling metal sulfides with carbonaceous functional support shows promising performance as anode candidates in sodium-ion batteries. The developed ZnS/CuS@C architecture exhibits impressive cycling life and competitive rate capability due to the synergistic coupling effect of heterostructures. Kinetics analysis and theoretical calculations suggest that the heterointerface induces large pseudocapacitive behaviors and ultrafast sodiation kinetics.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Chemistry, Analytical

Improvement of the electrochemical performance of Li1.2Ni0.13Co0.13Mn0.54O2 cathode material by Al2O3 surface coating

Tong Zou et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2020)

Editorial Material Multidisciplinary Sciences

A retrospective on lithium-ion batteries

Jing Xie et al.

NATURE COMMUNICATIONS (2020)

Article Chemistry, Physical

Deciphering the role of cationic substitution towards highly stable polyanionic cathodes

Ruhong Li et al.

ENERGY STORAGE MATERIALS (2020)

Article Engineering, Chemical

Key Parameter Optimization for the Continuous Synthesis of Ni-Rich Ni-Co-Al Cathode Materials for Lithium-Ion Batteries

Chunliu Xu et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2020)

Review Chemistry, Multidisciplinary

Li-rich cathodes for rechargeable Li-based batteries: reaction mechanisms and advanced characterization techniques

Wenhua Zuo et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Article Chemistry, Multidisciplinary

Lithium Deficiencies Engineering in Li-Rich Layered Oxide Li1.098Mn0.533Ni0.113Co0.138O2 for High-Stability Cathode

Pengfei Liu et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Review Multidisciplinary Sciences

Recycling lithium-ion batteries from electric vehicles

Gavin Harper et al.

NATURE (2019)

News Item Multidisciplinary Sciences

Lithium-ion battery development takes Nobel

Robert F. Service

SCIENCE (2019)

Editorial Material Multidisciplinary Sciences

The coming electric vehicle transformation

George Crabtree

SCIENCE (2019)

Article Chemistry, Multidisciplinary

A New Type of Li-Rich Rock-Salt Oxide Li2Ni1/3Ru2/3O3 with Reversible Anionic Redox Chemistry

Xiang Li et al.

ADVANCED MATERIALS (2019)

Article Chemistry, Physical

Abundant nanoscale defects to eliminate voltage decay in Li-rich cathode materials

Haocheng Guo et al.

ENERGY STORAGE MATERIALS (2019)

Review Chemistry, Multidisciplinary

30 Years of Lithium-Ion Batteries

Matthew Li et al.

ADVANCED MATERIALS (2018)

Article Chemistry, Multidisciplinary

Direct Visualization of the Reversible O2-/O- Redox Process in Li-Rich Cathode Materials

Xiang Li et al.

ADVANCED MATERIALS (2018)

Article Nanoscience & Nanotechnology

Sustainable and Superior Heat-Resistant Alginate Nonwoven Separator of LiNi0.5Mn1.5O4/Li Batteries Operated at 55 °C

Huijie Wen et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Article Materials Science, Ceramics

The effect of AlF3 modification on the physicochemical and electrochemical properties of Li-rich layered oxide

Shengli Pang et al.

CERAMICS INTERNATIONAL (2016)

Article Chemistry, Physical

Lithium- and Manganese-Rich Oxide Cathode Materials for High-Energy Lithium Ion Batteries

Jun Wang et al.

ADVANCED ENERGY MATERIALS (2016)