4.6 Article

Development of Highly Efficient ZnO Nanorod-Based Nontoxic Perovskite Solar Cell Using AZO Buffer Layer and Lanthanide Doping

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Physics, Condensed Matter

Numerical simulation of highly efficient lead-free perovskite layers for the application of all-perovskite multi junction solar cell

Neelima Singh et al.

Summary: The numerical simulation demonstrated that CsSnGeI3-based perovskite solar cells exhibit better photovoltaic performance compared to CH3NH3GeI3-based cells. Factors such as hole transport layer, defect density, metal work function, and temperature were found to influence the device performance. Matching the current of the two perovskite layers is crucial for all-perovskite multi junction solar cells.

SUPERLATTICES AND MICROSTRUCTURES (2021)

Article Chemistry, Multidisciplinary

Research Progress on the Application of Lanthanide-Ion-Doped Phosphor Materials in Perovskite Solar Cells

Santhosh Kumar Karunakaran et al.

Summary: Perovskite solar cells have high efficiency and low cost, but face challenges such as poor stability, toxicity of lead element, and spectral mismatch. Incorporating lanthanide-doped luminescent materials can improve photovoltaic efficiency, stability, and light scattering in devices.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Article Chemistry, Multidisciplinary

Lanthanide-Doped Upconversion Nanoparticles for Super-Resolution Microscopy

Hao Dong et al.

Summary: Super-resolution microscopy using upconversion nanoparticles as probes allows for imaging at nanometer precision. Despite opportunities and challenges, this technique is still in its early stages of development.

FRONTIERS IN CHEMISTRY (2021)

Article Optics

Effect of interface defects on high efficient perovskite solar cells

Farhad Izadi et al.

Summary: Experimental J-V and external quantum efficiency (EQE) were used to validate the improvement in efficiency of perovskite solar cells (PSC) in this study. The impact of interface properties at the electron transport layer (ETL)/PSK and PSK/hole transport layer (HTL) on open-circuit voltage (Voc) and fill factor (FF) was examined. Optimization of trap defect energy at these interfaces was found to be crucial for enhancing carrier collection in the PSK solar cells.
Article Energy & Fuels

Grown and Characterization of ZnO Aligned Nanorod Arrays for Sensor Applications

Arkady N. Redkin et al.

Summary: The properties of ZnO nanorods were investigated using X-ray diffraction, Raman spectroscopy, and cathodoluminescence. Annealing was found to increase sensitivity and decrease responsivity, attributed to oxygen out-diffusion and the formation of a surface layer enriched with oxygen vacancies.

ENERGIES (2021)

Article Engineering, Electrical & Electronic

p-i-n Structured Semitransparent Perovskite Solar Cells with Solution-Processed Electron Transport Layer

Asim Guchhait et al.

Summary: Solution processed p-i-n structured semitransparent perovskite solar cells were developed in this study, with Al-doped ZnO showing superior optoelectronic performance and yielding a higher power conversion efficiency. Aluminum-doped zinc oxide nanoparticles were found to be effective as a buffer layer for enhancing the overall photovoltaic performance.

JOURNAL OF ELECTRONIC MATERIALS (2021)

Proceedings Paper Materials Science, Multidisciplinary

Optimization of layer thickness of ZnO based perovskite solar cells using SCAPS 1D

S. Aseena et al.

Summary: Perovskite solar cells have shown significant advancements in performance and efficiency in recent years. Optimization of the cell structure through software simulation plays a crucial role in enhancing the overall efficiency of the solar cells.

MATERIALS TODAY-PROCEEDINGS (2021)

Article Multidisciplinary Sciences

Impact of absorber layer thickness, defect density, and operating temperature on the performance of MAPbI3 solar cells based on ZnO electron transporting material

Touria Ouslimane et al.

Summary: Through simulation and analysis of various parameters, it was found that low-cost, high-efficiency, and low-temperature PSCs fabrication can be achieved.

HELIYON (2021)

Article Materials Science, Multidisciplinary

Investigating the performance of formamidinium tin-based perovskite solar cell by SCAPS device simulation

S. Abdelaziz et al.

OPTICAL MATERIALS (2020)

Article Physics, Applied

External quantum efficiency measurements used to study the stability of differently deposited perovskite solar cells

Pedro Hierrezuelo-Cardet et al.

JOURNAL OF APPLIED PHYSICS (2020)

Article Physics, Condensed Matter

Fabrication and TCAD validation of ambient air-processed ZnO NRs/CH3NH3PbI3/spiro-OMeTAD solar cells

Deepak Kumar Jarwal et al.

SUPERLATTICES AND MICROSTRUCTURES (2020)

Article Chemistry, Physical

Stability of the Eu2+ Dopant in CsPbBr3 Perovskites: A First-Principles Study

Anu Bala et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2019)

Article Materials Science, Multidisciplinary

La-doped SnO2 as ETL for efficient planar-structure hybrid perovskite solar cells

Zhenhua Xu et al.

ORGANIC ELECTRONICS (2019)

Proceedings Paper Materials Science, Multidisciplinary

Effect of Al-doped ZnO for Electron Transporting Layer in Planar Perovskite solar cells

Chawalit Bhoomanee et al.

MATERIALS TODAY-PROCEEDINGS (2019)

Review Nanoscience & Nanotechnology

Perovskite-Based Solar Cells: Materials, Methods, and Future Perspectives

Di Zhou et al.

JOURNAL OF NANOMATERIALS (2018)

Article Materials Science, Multidisciplinary

Effect of interface defect density on performance of perovskite solar cell: Correlation of simulation and experiment

Arun Singh Chouhan et al.

MATERIALS LETTERS (2018)

Review Green & Sustainable Science & Technology

Recent progress in perovskite solar cells

M. Khalaji Assadi et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

Article Engineering, Electrical & Electronic

A comprehensive device modelling of perovskite solar cell with inorganic copper iodide as hole transport material

Syed Zulqarnain Haider et al.

SEMICONDUCTOR SCIENCE AND TECHNOLOGY (2018)

Review Engineering, Electrical & Electronic

Defects engineering for high-performance perovskite solar cells

Feng Wang et al.

NPJ FLEXIBLE ELECTRONICS (2018)

Article Energy & Fuels

Flexible perovskite solar cells with ultrathin Au anode and vapour-deposited perovskite film

Ming Xu et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2017)

Article Physics, Multidisciplinary

Device simulation of lead-free CH3NH3SnI3 perovskite solar cells with high efficiency

Hui-Jing Du et al.

CHINESE PHYSICS B (2016)

Article Chemistry, Physical

50% Sn-Based Planar Perovskite Solar Cell with Power Conversion Efficiency up to 13.6%

Yunlong Li et al.

ADVANCED ENERGY MATERIALS (2016)

Proceedings Paper Physics, Applied

Comparative study on MAPbI3 based solar cells using different electron transporting materials

Krishna R. Adhikari et al.

PHYSICA STATUS SOLIDI C: CURRENT TOPICS IN SOLID STATE PHYSICS, VOL 13, NO 1 (2016)

Article Chemistry, Multidisciplinary

Recent advances in flexible perovskite solar cells

B. Susrutha et al.

CHEMICAL COMMUNICATIONS (2015)

Article Chemistry, Physical

Insights into Planar CH(3)NH(3)Pbl(3) Perovskite Solar Cells Using Impedance Spectroscopy

Alexander R. Pascoe et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2015)

Article Chemistry, Multidisciplinary

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells

Akihiro Kojima et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)