相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。An adaptive PCA-based method for more reliable ultrasonic guided waves SHM: Data-driven modeling and experimental validation in high attenuating medium
Mahjoub El Mountassir et al.
STRUCTURAL CONTROL & HEALTH MONITORING (2021)
Low Reliable and Low Latency Communications for Mission Critical Distributed Industrial Internet of Things
Dachao Yu et al.
IEEE COMMUNICATIONS LETTERS (2021)
Development of a low-power wireless acoustic emission sensor node for aerospace applications
Stephen Grigg et al.
STRUCTURAL CONTROL & HEALTH MONITORING (2021)
Acoustic emission and machine learning based classification of wear generated using a pin-on-disc tribometer equipped with a digital holographic microscope
Pushkar Deshpande et al.
WEAR (2021)
An overview of acoustic emission inspection and monitoring technology in the key components of renewable energy systems
Yunze He et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)
The Core of the Fourth Revolutions: Industrial Internet of Things, Digital Twin, and Cyber-Physical Loops
Johannes Vrana
JOURNAL OF NONDESTRUCTIVE EVALUATION (2021)
Early wear detection and its significance for condition monitoring
Ping Lu et al.
TRIBOLOGY INTERNATIONAL (2021)
Computational study of the sensitivity of laser light scattering particle sizing to refractive index and irregularity
Juan Carlos Gomez Martin et al.
JOURNAL OF QUANTITATIVE SPECTROSCOPY & RADIATIVE TRANSFER (2020)
Fault diagnosis of journal bearing in a hydropower plant using wear debris, vibration and temperature analysis: A case study
Rakesh Ranjan et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING (2020)
Novel health monitoring technology for in-service diagnostics of intake separation in aircraft engines
Len Gelman et al.
STRUCTURAL CONTROL & HEALTH MONITORING (2020)
In situ synchrotron X-ray tomography of 304 stainless steels undergoing chlorine-induced stress corrosion cracking
Ryan Schoell et al.
CORROSION SCIENCE (2020)
Locating Sensors in Large-Scale Engineering Systems for Fault Isolation Based on Fault Feature Reduction
Jinxin Wang et al.
JOURNAL OF THE FRANKLIN INSTITUTE-ENGINEERING AND APPLIED MATHEMATICS (2020)
Circumferential film thickness measurement in journal bearings via the ultrasonic technique
S. Beamish et al.
TRIBOLOGY INTERNATIONAL (2020)
In-situ X-ray tomography of wear - A feasibility study
Jure Aleksejev et al.
TRIBOLOGY INTERNATIONAL (2020)
Novel resonant MEMS sensor for the detection of particles with dielectric properties in aged lubricating oils
Florian Patocka et al.
SENSORS AND ACTUATORS A-PHYSICAL (2020)
A hybrid fault diagnosis method for mechanical components based on ontology and signal analysis
Qiang Zhou et al.
JOURNAL OF INTELLIGENT MANUFACTURING (2019)
Experimental analysis and designing strategies of lens-less microscopy with partially coherent illumination
Yinxu Bian et al.
OPTICS COMMUNICATIONS (2019)
Study of Brake Wear Particle Emissions: Impact of Braking and Cruising Conditions
Ferdinand H. Farwick Zum Hagen et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2019)
An Inductive Debris Sensor Based on a High-Gradient Magnetic Field
Song Feng et al.
IEEE SENSORS JOURNAL (2019)
A multi-function sensor for online detection of contaminants in hydraulic oil
Haotian Shi et al.
TRIBOLOGY INTERNATIONAL (2019)
An Inductive Debris Sensor for a Large-Diameter Lubricating Oil Circuit Based on a High-Gradient Magnetic Field
Hong Xiao et al.
APPLIED SCIENCES-BASEL (2019)
Comprehensive Improvement of the Sensitivity and Detectability of a Large-Aperture Electromagnetic Wear Particle Detector
Ran Jia et al.
SENSORS (2019)
Radio Frequency Identification and Sensing Techniques and Their Applications-A Review of the State-of-the-Art
Lei Cui et al.
SENSORS (2019)
3D-printable portable open-source platform for low-cost lens-less holographic cellular imaging
Stephan Amann et al.
SCIENTIFIC REPORTS (2019)
An interactive and intuitive visualisation method for X-ray computed tomography data of biological samples in 3D Portable Document Format
Marketa Tesarova et al.
SCIENTIFIC REPORTS (2019)
Airborne Particle Detection Based on a Spin Hall Effect Measurement
Yan Ye et al.
IEEE SENSORS LETTERS (2019)
Mechanical Wear Life Prediction Based on Abrasive Debris Generation
Tongyang Li et al.
2019 PROGNOSTICS AND SYSTEM HEALTH MANAGEMENT CONFERENCE (PHM-PARIS) (2019)
FS-IIoTSim: a flexible and scalable simulation framework for performance evaluation of industrial Internet of things systems
Hwi-Ho Lee et al.
JOURNAL OF SUPERCOMPUTING (2018)
Investigating the size, shape and surface roughness dependence of polarization lidars with light-scattering computations on real mineral dust particles: Application to dust particles' external mixtures and dust mass concentration retrievals
Tahar Mehri et al.
ATMOSPHERIC RESEARCH (2018)
Magnetic biosensors: Modelling and simulation
Vahid Nabaei et al.
BIOSENSORS & BIOELECTRONICS (2018)
Mechanical wear debris feature, detection, and diagnosis: A review
Wei Hong et al.
CHINESE JOURNAL OF AERONAUTICS (2018)
An online de-noising method for oil ultrasonic wear debris signal: fuzzy morphology component analysis
Yining Li et al.
INDUSTRIAL LUBRICATION AND TRIBOLOGY (2018)
Compressive sensing-based electrostatic sensor array signal processing and exhausted abnormal debris detecting
Xin Tang et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2018)
Differentiation of nonferrous metal particles in lubrication oil using an electrical conductivity measurement-based inductive sensor
Yu Wu et al.
REVIEW OF SCIENTIFIC INSTRUMENTS (2018)
Ice monitoring of a full-scale wind turbine blade using ultrasonic guided waves under varying temperature conditions
Peng Wang et al.
STRUCTURAL CONTROL & HEALTH MONITORING (2018)
Prediction of wear trend of engines via on-line wear debris monitoring
Wei Cao et al.
TRIBOLOGY INTERNATIONAL (2018)
Detection of gear pitting failure progression with on-line particle monitoring
J. Kattelus et al.
TRIBOLOGY INTERNATIONAL (2018)
Inductive debris sensor using one energizing coil with multiple sensing coils for sensitivity improvement and high throughput
Yi Jun Ren et al.
TRIBOLOGY INTERNATIONAL (2018)
Restoration of online video ferrography images for out-of-focus degradations
Wenkui Xi et al.
EURASIP JOURNAL ON IMAGE AND VIDEO PROCESSING (2018)
Monitoring of Non-Ferrous Wear Debris in Hydraulic Oil by Detecting the Equivalent Resistance of Inductive Sensors
Lin Zeng et al.
MICROMACHINES (2018)
Tool wear monitoring in single-point diamond turning using laser scattering from machined workpiece
H. Hocheng et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Magnetic-Capacitive Wear Debris Sensor Plug for Condition Monitoring of Hydraulic Systems
P. Muthuvel et al.
IEEE SENSORS JOURNAL (2018)
Detection of foreign particles in lubrication oil with a microfluidic chip
Yu Wu
INDUSTRIAL LUBRICATION AND TRIBOLOGY (2018)
Design of coils on printed circuit board for inductive power transfer system
Zhenning Li et al.
IET POWER ELECTRONICS (2018)
Unsupervised segmentation of wear particle's image using local texture feature
Hong Liu et al.
INDUSTRIAL LUBRICATION AND TRIBOLOGY (2018)
Debris Recognition Methods in the Lubrication System with Electrostatic Sensors
Huijie Mao et al.
MATHEMATICAL PROBLEMS IN ENGINEERING (2018)
Model of a Light Extinction Sensor for Assessing Wear Particle Distribution in a Lubricated Oil System
Kevin Krogsoe et al.
SENSORS (2018)
Magnetic Properties of Ferromagnetic Particles under Alternating Magnetic Fields: Focus on Particle Detection Sensor Applications
Ran Jia et al.
SENSORS (2018)
Electrostatic Sensor Application for On-Line Monitoring of Wind Turbine Gearboxes
Huijie Mao et al.
SENSORS (2018)
Resonant-state expansion of three-dimensional open optical systems: Light scattering
S. Lobanov et al.
PHYSICAL REVIEW A (2018)
Application Progress of Lensless Microscopy Imaging Technology for Point-of-Care Testing
Li Conghui et al.
CHINESE JOURNAL OF LASERS-ZHONGGUO JIGUANG (2018)
Fast object identification with mode switching for coexistence of NFC and RFID
Chul Wan Park et al.
TRANSACTIONS ON EMERGING TELECOMMUNICATIONS TECHNOLOGIES (2017)
Health indicator metrics applicable to inductive wear debris sensors
Andrew Becker
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2017)
Morphological Feature Extraction Based on Multiview Images for Wear Debris Analysis in On-line Fluid Monitoring
Tonghai Wu et al.
TRIBOLOGY TRANSACTIONS (2017)
Investigation of Bending Stress Effect on the Diagonal and Off-Diagonal Impedances for GMI Sensor Implementation
Julie Nabias et al.
IEEE TRANSACTIONS ON MAGNETICS (2017)
A Novel Indicator for Mechanical Failure and Life Prediction Based on Debris Monitoring
Wei Hong et al.
IEEE TRANSACTIONS ON RELIABILITY (2017)
An approach to calculating metal particle detection in lubrication oil based on a micro inductive sensor
Yu Wu et al.
MEASUREMENT SCIENCE AND TECHNOLOGY (2017)
A high sensitivity wear debris sensor using ferrite cores for online oil condition monitoring
Xiaoliang Zhu et al.
MEASUREMENT SCIENCE AND TECHNOLOGY (2017)
A hybrid method based on Band Pass Filter and Correlation Algorithm to improve debris sensor capacity
Wei Hong et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2017)
A 3 x 3 wear debris sensor array for real time lubricant oil conditioning monitoring using synchronized sampling
Xiaoliang Zhu et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2017)
Unsteady void measurements within debris beds using high speed X-ray tomography
E. Laurien et al.
NUCLEAR ENGINEERING AND DESIGN (2017)
Photonic Low Cost Micro-Sensor for in-Line Wear Particle Detection in Flowing Lube Oils
Jon Mabe et al.
SENSORS (2017)
A Review of Passive RFID Tag Antenna-Based Sensors and Systems for Structural Health Monitoring Applications
Jun Zhang et al.
SENSORS (2017)
Modeling and experimental investigations on the relationship between wear debris concentration and wear rate in lubrication systems
Bin Fan et al.
TRIBOLOGY INTERNATIONAL (2017)
Lubricating oil conditioning sensors for online machine health monitoring - A review
Xiaoliang Zhu et al.
TRIBOLOGY INTERNATIONAL (2017)
Direct Image Reconstruction of Lissajous-Type Magnetic Particle Imaging Data Using Chebyshev-Based Matrix Compression
Leonard Schmiester et al.
IEEE TRANSACTIONS ON COMPUTATIONAL IMAGING (2017)
High-level modeling and synthesis of smart sensor networks for Industrial Internet of Things
Ching-Han Chen et al.
COMPUTERS & ELECTRICAL ENGINEERING (2017)
Brief retrospect of super-resolution optical microscopy techniques
Hu Rui-Xuan et al.
ACTA PHYSICA SINICA (2017)
Ferrography Wear Particles Image Recognition Based on Extreme Learning Machine
Qiong Li et al.
JOURNAL OF ELECTRICAL AND COMPUTER ENGINEERING (2017)
Determination of metal particles in oil using a microfluidic chip-based inductive sensor
Yu Wu et al.
INSTRUMENTATION SCIENCE & TECHNOLOGY (2016)
On the impact of fine filtration on spectrometric oil analysis and inductive wear debris sensors
Andrew Becker et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2016)
Establishing a Customized Guide Plate for Osteotomy in Total Knee Arthroplasty Using Lower-extremity X-ray and Knee Computed Tomography Images
Jin Zhang et al.
CHINESE MEDICAL JOURNAL (2016)
High-density chipless RFID tag for temperature sensing
T. Noor et al.
ELECTRONICS LETTERS (2016)
Development of Wireless and Passive Corrosion Sensors for Material Degradation Monitoring in Coastal Zones and Immersed Environment
Rania Khalifeh et al.
IEEE JOURNAL OF OCEANIC ENGINEERING (2016)
Design, Calibration and Experimentation of an Epidermal RFID Sensor for Remote Temperature Monitoring
S. Amendola et al.
IEEE SENSORS JOURNAL (2016)
A Microfluidic Chip and Dark-Field Imaging System for Size Measurement of Metal Wear Particles in Oil
Christoph Haiden et al.
IEEE SENSORS JOURNAL (2016)
Modelling and evaluation of HF-RFID signal propagation characterisations under material properties variation
Aijun Yin et al.
IET SCIENCE MEASUREMENT & TECHNOLOGY (2016)
Assessment of wear facets produced by the ACTA wear machine
Ana R. Benetti et al.
JOURNAL OF DENTISTRY (2016)
A Review of the Radio Frequency Non-destructive Testing for Carbon-fibre Composites
Zhen Li et al.
MEASUREMENT SCIENCE REVIEW (2016)
Simultaneous holographic imaging and light-scattering pattern measurement of individual microparticles
Matthew J. Berg et al.
OPTICS LETTERS (2016)
An online debris sensor system with vibration resistance for lubrication analysis
Yongbin Ding et al.
REVIEW OF SCIENTIFIC INSTRUMENTS (2016)
Low frequency (LF) RFID sensors and selective transient feature extraction for corrosion characterisation
Ali Imam Sunny et al.
SENSORS AND ACTUATORS A-PHYSICAL (2016)
Tribological assessment of sliding pairs under damped harmonic excitation loading based on on-line monitoring methods
Wei Yuan et al.
TRIBOLOGY INTERNATIONAL (2016)
Monitoring of Wind Turbine Gearbox Condition through Oil and Wear Debris Analysis: A Full-Scale Testing Perspective
Shuangwen Sheng
TRIBOLOGY TRANSACTIONS (2016)
A prototype of on-line extraction and three-dimensional characterisation of wear particle features from video sequence
Hongkun Wu et al.
WEAR (2016)
Synchrotron-radiation-based X-ray micro-computed tomography reveals dental bur debris under dental composite restorations
Assem Hedayat et al.
JOURNAL OF SYNCHROTRON RADIATION (2016)
Rapid structural condition assessment using radio frequency identification (RFID) based wireless strain sensor
Yunfeng Zhang et al.
AUTOMATION IN CONSTRUCTION (2015)
Sensitivity Modeling of an RFID-Based Strain-Sensing Antenna With Dielectric Constant Change
Xiaohua Yi et al.
IEEE SENSORS JOURNAL (2015)
Wireless Passive RFID Crack Width Sensor for Structural Health Monitoring
Stefano Caizzone et al.
IEEE SENSORS JOURNAL (2015)
Equivalent Magnetic Noise of Micro-Patterned Multilayer Thin Films Based GMI Microsensor
Eduardo Fernandez et al.
IEEE SENSORS JOURNAL (2015)
Modeling High-Frequency Magnetic Losses in Transverse Anisotropy Amorphous Ribbons
Oriano Bottauscio et al.
IEEE TRANSACTIONS ON MAGNETICS (2015)
Loss Computation of Soft Magnetic Composite Inductors Based on Interpolated Scalar Magnetic Property
Takahiro Sato et al.
IEEE TRANSACTIONS ON MAGNETICS (2015)
Enhancement of oil particle sensor capability via resonance-based signal decomposition and fractional calculus
Jiesi Luo et al.
MEASUREMENT (2015)
A new debris sensor based on dual excitation sources for online debris monitoring
Wei Hong et al.
MEASUREMENT SCIENCE AND TECHNOLOGY (2015)
Ultrasonic echo waveshape features extraction based on QPSO-matching pursuit for online wear debris discrimination
Chao Xu et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2015)
Motion-Blurred Particle Image Restoration for On-Line Wear Monitoring
Yeping Peng et al.
SENSORS (2015)
Multisensor information integration for online wear condition monitoring of diesel engines
Wei Cao et al.
TRIBOLOGY INTERNATIONAL (2015)
Wear map for a copper-based friction clutch material under oil lubrication
Taimin Gong et al.
WEAR (2015)
Oxidation wear monitoring based on the color extraction of on-line wear debris
Yeping Peng et al.
WEAR (2015)
Mechanisms of incursion accommodation during interaction between a vibrating blade and an abradable coating
Romain Mandard et al.
WEAR (2015)
An integrated lubricant oil conditioning sensor using signal multiplexing
Xiaoliang Zhu et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2015)
Feature extraction for rolling bearing fault diagnosis by electrostatic monitoring sensors
Ying Zhang et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2015)
Determining inductive sensor wear debris limits for rolling contact fatigue of bearings
Andrew Becker et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2015)
Wheatstone bridge giant-magnetoresistance based cell counter
Chiun-Peng Lee et al.
BIOSENSORS & BIOELECTRONICS (2014)
Planar Spiral Coil Design for a Pulsed Induction Metal Detector to Improve the Sensitivities
Bobae Kim et al.
IEEE ANTENNAS AND WIRELESS PROPAGATION LETTERS (2014)
Research on the Output Characteristics of Microfluidic Inductive Sensor
Xingming Zhang et al.
JOURNAL OF NANOMATERIALS (2014)
Enhancement of the Wear Particle Monitoring Capability of Oil Debris Sensors Using a Maximal Overlap Discrete Wavelet Transform with Optimal Decomposition Depth
Chuan Li et al.
SENSORS (2014)
3D Surface Characterizations of Wear Particles Generated from Lubricated Regular Concave Cylinder Liners
Zhiwei Guo et al.
TRIBOLOGY LETTERS (2014)
Enhancement of oil debris sensor capability by reliable debris signature extraction via wavelet domain target and interference signal tracking
Chuan Li et al.
MEASUREMENT (2013)
Improving sensitivity of an inductive pulse sensor for detection of metallic wear debris in lubricants using parallel LC resonance method
Li Du et al.
MEASUREMENT SCIENCE AND TECHNOLOGY (2013)
Electromagnetic spin-orbit interaction and giant spin-Hall effect in dielectric particle clusters
Yineng Liu et al.
PHYSICS LETTERS A (2013)
Passive wireless displacement sensor based on RFID technology
Mario J. Cazeca et al.
SENSORS AND ACTUATORS A-PHYSICAL (2013)
Passive wireless antenna sensor for strain and crack sensing-electromagnetic modeling, simulation, and testing
Xiaohua Yi et al.
SMART MATERIALS AND STRUCTURES (2013)
An ultrasonic method for measuring fluid penetration rate into threaded contacts
J. R. Vail et al.
TRIBOLOGY INTERNATIONAL (2013)
GMI detection of magnetic-particle concentration in continuous flow
A. Garcia-Arribas et al.
SENSORS AND ACTUATORS A-PHYSICAL (2011)
Calculation of the eddy current in a small conducting spherical particle
S. V. Berezkina et al.
PHYSICS OF THE SOLID STATE (2007)
Current sensor application of asymmetric giant magnetoimpedance in amorphous materials
YW Rheem et al.
SENSORS AND ACTUATORS A-PHYSICAL (2003)