4.5 Article

Study on Stability of Stope Surrounding Rock under Repeated Mining in Close-Distance Coal Seams

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Environmental

Characteristics and control technology of face-end roof leaks subjected to repeated mining in close-distance coal seams

Dezhong Kong et al.

Summary: The study investigated roof collapse and leakage characteristics in underground mining, analyzing factors affecting face-end roof stability and proposing control measures. UDEC simulation software showed that stronger roof and surrounding rock, smaller tip-to-face distance, and improved support strength lead to more stable face-end roof under repeated mining.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2021)

Article Engineering, Geological

Mechanical behavior of marble exposed to freeze-thaw-fatigue loading

Zhengyang Song et al.

Summary: The test results indicate that an increase in FT cycles and fatigue load level accelerates the damage rate of marble, leading to larger axial strain rate, radial strain rate, and increasing Poisson's ratio. A warning level is defined based on the evolution of radial strain and Poisson's ratio. Advance ratio and lag ratio are effective indicators for predicting rock failure when subjected to FTF actions.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2021)

Article Metallurgy & Metallurgical Engineering

Experimental Study of Dynamic Mechanical Response and Energy Dissipation of Rock Having a Circular Opening Under Impact Loading

Hao Wu et al.

Summary: This study investigated the mechanical properties and energy evolution of sandstone samples with and without circular cavities under impact loading tests. The presence of a cavity weakened the dynamic compressive strength and affected crack initiation and rock fragmentation.

MINING METALLURGY & EXPLORATION (2021)

Article Mathematics, Interdisciplinary Applications

A FRACTAL PERSPECTIVE ON FRACTURE INITIATION AND PROPAGATION OF RESERVOIR ROCKS UNDER WATER AND NITROGEN FRACTURING

Xin Liang et al.

Summary: This study investigated the fractal characteristics of crack propagation in hydraulic fracturing and the impact of fractal dimension of induced fractures on rock breakdown pressure. The results showed that N-2 fracturing can lower the rock breakdown pressure and induce more tortuous macro-fractures. The study suggests that crack fractal dimension is an important factor that should be considered in designing fracturing operations.

FRACTALS-COMPLEX GEOMETRY PATTERNS AND SCALING IN NATURE AND SOCIETY (2021)

Article Energy & Fuels

Quantitative visualization and characteristics of gas flow in 3D pore-fracture system of tight rock based on Lattice Boltzmann simulation

Peng Hou et al.

Summary: This study reconstructed and simulated the 3D pore-fracture system of tight rock to investigate the effects of micro-fracture morphology and gas rarefaction effect on gas flow and permeability. The results show that gas flow behavior is influenced by these factors, with the pore-fracture structure being more sensitive at low-pressure conditions.

JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING (2021)

Article Geosciences, Multidisciplinary

3D Multi-scale Reconstruction of Fractured Shale and Influence of Fracture Morphology on Shale Gas Flow

Peng Hou et al.

Summary: Quantitative characterization of shale gas flow in fractured shale is essential in shale gas extraction. This study reconstructed 3D multi-scale structures in fractured shale using various techniques and analyzed the effects of fracture complexity and gas pressure on shale gas flow quantitatively. The results showed that fracture morphology and gas pressure greatly influenced gas flow behavior in fractured shale.

NATURAL RESOURCES RESEARCH (2021)

Article Construction & Building Technology

Similar Physical Modeling of Roof Stress and Subsidence in Room and Pillar Mining of a Gently Inclined Medium-Thick Phosphate Rock

Xiaoshuang Li et al.

Summary: This study used a physical model to investigate roof stress and subsidence during mining in the Jinning Phosphate Mine in Yunnan, China. Three different stoping structures were considered, showing pressure relief areas above the stopes and pressure-bearing areas at the front of the roof. As mining extended, stress relief boundaries increased and the roof subsided with a maximum of -14.58 mm, -4.67 mm, and -3.48 mm, creating bending subsidence, fracture, and caving zones in the overlying strata.

ADVANCES IN CIVIL ENGINEERING (2021)

Article Energy & Fuels

Instability Control of Roadway Surrounding Rock in Close-Distance Coal Seam Groups under Repeated Mining

Yu Xiong et al.

Summary: The study reveals that roadway surrounding rock under repeated mining is vulnerable to engineering disturbances, with low strength and poor bearing capacity, posing a high risk of instability. Therefore, a repair scheme is proposed to reduce the risk of instability.

ENERGIES (2021)

Article Materials Science, Multidisciplinary

Influence Factors' Analysis of the Face-End Roof Leaks Exposed to Repeated Mining Based on Multiple Linear Regression

Qiang Li et al.

Summary: This study analyzed the various influencing factors of the face-end roof exposed to repeated mining through field observations and orthogonal experiments, providing a basis for comprehensively controlling the stability of the face-end roof. The research results indicated the importance of coordinating all influencing factors to ensure the stability of the face-end roof exposed to repeated mining.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2021)

Article Materials Science, Multidisciplinary

Research on the Evolution Characteristics of Rock Mass Response from Open-Pit to Underground Mining

Jiabo Geng et al.

Summary: This study investigates the movement, deformation, and failure laws of surrounding rocks in underground stopes at Jinning Phosphate Mine, China. Using a combination of physical model experiments and numerical simulations, it reveals the evolution characteristics of the surrounding rock during the transition from open-pit to underground mining. The results show that the impact of mining stress decreases with distance from the stope along the ore body inclination, and the overlying strata of the stope exhibit a layered structure with different zones appearing during the ore body recovery process.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2021)

Article Mathematics

The Comprehensive Identification of Roof Risk in a Fully Mechanized Working Face Using the Cloud Model

Yu Xiong et al.

Summary: The comprehensive standard cloud model proposed in this study has strong visibility and easily discovers the key parts of risk indexes, solving the problems of ambiguity and quantitative identification in traditional roof risk evaluation methods.

MATHEMATICS (2021)

Article Energy & Fuels

Characteristics of evolution of mining-induced stress field in the longwall panel: insights from physical modeling

Jinfu Lou et al.

Summary: The evolution of mining-induced stress field in longwall panel is closely related to the fracture field and the breaking characteristics of strata. A large-scale physical model was constructed to investigate its evolution and theoretical analysis was used to reveal the mechanism of stress distribution in the overburden. The modelling results showed that the major principal stress field is arch-shaped, with stress concentration particularly on both shoulders of the arch-shaped structure, and that the trajectories of principal stress determine the fracture morphology.

INTERNATIONAL JOURNAL OF COAL SCIENCE & TECHNOLOGY (2021)

Article Engineering, Mechanical

Inhomogeneous mechanical behaviour of concrete subjected to monotonic and cyclic loading

Zhengyang Song et al.

INTERNATIONAL JOURNAL OF FATIGUE (2020)

Article Engineering, Mechanical

Physical model test study on support of super pre-stressed anchor in the mining engineering

Juncai Cao et al.

ENGINEERING FAILURE ANALYSIS (2020)

Article Engineering, Geological

Modeling behaviors of a coal pillar rib using the progressive S-shaped yield criterion

Sankhaneel Sinha et al.

JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2020)

Article Engineering, Mechanical

Field and numerical investigations on the lower coal seam entry failure analysis under the remnant pillar

Zizheng Zhang et al.

ENGINEERING FAILURE ANALYSIS (2020)

Article Engineering, Geological

Numerical investigation into strength and deformability of veined rock mass

Maximiliano R. Vergara et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2020)

Article Environmental Sciences

DYNAMIC EVOLUTION CHARACTERISTICS AND MECHANISM OF SURROUNDING ROCK FRACTURES DURING THE REPEATED MINING OF CLOSED DISTANCE DEEP COAL SEAM

Jiazhuo Li et al.

REVISTA INTERNACIONAL DE CONTAMINACION AMBIENTAL (2019)

Article Engineering, Geological

Analytical Solution for Fracture of Stope Roof Based on Pasternak Foundation Model

Qiang Feng et al.

SOIL MECHANICS AND FOUNDATION ENGINEERING (2019)

Article Geosciences, Multidisciplinary

Influence of the variable stoping speed on the occurrence mechanism of rock burst

Wei-Yao Guo et al.

GEOMATICS NATURAL HAZARDS & RISK (2019)

Article Engineering, Geological

Improvement of analytical factor of safety estimation of falling failure mode in roof wedge stability

G. F. Napa-Garcia et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2018)