相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Effects of adding aluminum oxide nanoparticles to butanol-diesel blends on performance, particulate matter, and emission characteristics of diesel engine
Mohammed A. Fayad et al.
FUEL (2021)
Optimization of injection timing and anti-oxidants for multiple responses of CI engine fuelled with algae biodiesel blend
Saravanan Subramani et al.
FUEL (2021)
Effect of renewable fuel and injection strategies on combustion characteristics and gaseous emissions in diesel engines
Mohammed A. Fayad
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2020)
Influence of alternative fuels on combustion and characteristics of particulate matter morphology in a compression ignition diesel engine
Mohammed A. Fayad et al.
RENEWABLE ENERGY (2020)
Experimental investigation on pumpkin seed oil methyl ester blend in diesel engine with various injection pressure, injection timing and compression ratio
Shuang Wang et al.
FUEL (2020)
Impact of using Iraqi biofuel-kerosene blends on coarse and fine particulate matter emitted from compression ignition engines
Noor H. Hamza et al.
ALEXANDRIA ENGINEERING JOURNAL (2020)
Investigating the influence of oxygenated fuel on particulate size distribution and NOX control in a common-rail diesel engine at rated EGR levels
Mohammed A. Fayad
THERMAL SCIENCE AND ENGINEERING PROGRESS (2020)
Role of different antioxidants additions to renewable fuels on NOx emissions reduction and smoke number in direct injection diesel engine
Hayder A. Dhahad et al.
FUEL (2020)
Performance, regulated and unregulated exhaust emission of a stationary compression ignition engine fueled by water-ULSD emulsion
Hayder A. Dhahad et al.
ENERGY (2019)
Effect of fuel injection strategy on combustion performance and NOx/smoke trade-off under a range of operating conditions for a heavy-duty DI diesel engine
Mohammed A. Fayad
SN APPLIED SCIENCES (2019)
The Key Role of Advanced, Flexible Fuel Injection Systems to Match the Future CO2 Targets in an Ultra Light Mid Size Diesel Engine
Gabriele Di Blasio et al.
SAE INTERNATIONAL JOURNAL OF ENGINES (2019)
Performance and emitted pollutants assessment of diesel engine fuelled with biokerosene
Noora Salih Ekaab et al.
CASE STUDIES IN THERMAL ENGINEERING (2019)
Interactions between aftertreatment systems architecture and combustion of oxygenated fuels for improved low temperature catalysts activity
M. A. Fayad et al.
FUEL (2018)
Influence of injection timing and split injection strategies on performance, emissions, and combustion characteristics of diesel engine fueled with biodiesel blended fuels
H. G. How et al.
FUEL (2018)
Performance and emissions of diesel-biodiesel-ethanol blends in a light duty compression ignition engine
Sam Shamun et al.
APPLIED THERMAL ENGINEERING (2018)
Combined Effects of Soot Load and Catalyst Activity on the Regeneration Dynamics of Catalytic Diesel Particulate Filters
Valeria Di Sarli et al.
AICHE JOURNAL (2018)
Combustion and emission characteristics of E85 and diesel blend in conventional diesel engine operating in PPCI mode
Miqdam T. Chaichan
THERMAL SCIENCE AND ENGINEERING PROGRESS (2018)
Research on the effects of injection strategy on LTC combustion based on two-stage fuel injection
Lei Shi et al.
ENERGY (2017)
Effects of fuel injection parameters on emission characteristics of diesel engines operating on various biodiesel: A review
P. Mohamed Shameer et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
Functional Requirements to Exceed the 100 kW/l Milestone for High Power Density Automotive Diesel Engines
Gabriele Di Blasio et al.
SAE INTERNATIONAL JOURNAL OF ENGINES (2017)
Manipulating modern diesel engine particulate emission characteristics through butanol fuel blending and fuel injection strategies for efficient diesel oxidation catalysts
M. A. Fayad et al.
APPLIED ENERGY (2017)
Operating Map for Regeneration of a Catalytic Diesel Particulate Filter
Valeria Di Sarli et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2016)
Role of Alternative Fuels on Particulate Matter (PM) Characteristics and Influence of the Diesel Oxidation Catalyst
Mohammed A. Fayad et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2015)
Effect of multiple-injection strategies on diesel engine exhaust particle size and nanostructure
Xinling Li et al.
JOURNAL OF AEROSOL SCIENCE (2015)
Investigation of the combustion in both metal and optical diesel engines using high-glycerol ethers/diesel blends
Carlo Beatrice et al.
INTERNATIONAL JOURNAL OF ENGINE RESEARCH (2015)
Effects of Injection Pressure on Diesel Engine Particle Physico-Chemical Properties
Zhen Xu et al.
AEROSOL SCIENCE AND TECHNOLOGY (2014)
Effects of injection parameters and EGR on exhaust soot particle number-size distribution for diesel and RME fuels in HSDI engines
Lukasz Labecki et al.
FUEL (2013)
Post injection in a compression ignition engine fueled with dimethyl-ether
Hyeonsook Yoon et al.
FUEL (2013)
Combined effect of injection timing, EGR and injection pressure in NOx control of a stationary diesel engine fuelled with crude rice bran oil methyl ester
S. Saravanan et al.
FUEL (2013)
Experimental Characterization of Diesel Combustion Using Glycerol Derived Ethers Mixtures
Gabriele Di Blasio et al.
SAE INTERNATIONAL JOURNAL OF FUELS AND LUBRICANTS (2013)
Diesel emissions improvements through the use of biodiesel or oxygenated blending components
S. S. Gill et al.
FUEL (2012)
Influence of injection timing on performance, combustion and emission characteristics of Jatropha biodiesel engine
T. Ganapathy et al.
APPLIED ENERGY (2011)
Effects of Fuel Injection Timing in the Combustion of Biofuels in a Diesel Engine at Partial Loads
A. J. Sequera et al.
JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME (2011)
An investigation of the effects of spray angle and injection strategy on dimethyl ether (DME) combustion and exhaust emission characteristics in a common-rail diesel engine
Seung Hyun Yoon et al.
FUEL PROCESSING TECHNOLOGY (2010)
Effect of Ethanol on Blending Stability and Diesel Engine Emissions
Magin Lapuerta et al.
ENERGY & FUELS (2009)
Effects of injection timing on the engine performance and exhaust emissions of a dual-fuel diesel engine
Cenk Sayin et al.
ENERGY CONVERSION AND MANAGEMENT (2009)
Emission Characteristics of a Diesel Engine Fueled by 25% Sunflower Oil Methyl Ester and 75% Diesel Fuel Blend
C. Ilkilic
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2009)
Effect of injection timing on the exhaust emissions of a diesel engine using diesel-methanol blends
Cenk Sayin et al.
RENEWABLE ENERGY (2009)
Effects of biodiesel from used frying palm oil on the performance, injection, and combustion characteristics of an indirect injection diesel engine
Ahmet Necati Ozsezen et al.
ENERGY & FUELS (2008)
Biodiesel production from various feedstocks and their effects on the fuel properties
M. Canakci et al.
JOURNAL OF INDUSTRIAL MICROBIOLOGY & BIOTECHNOLOGY (2008)
Effects of fuel injection timing on combustion and emission characteristics of a diesel engine fueled with diesel-propane blends
Zhihao Ma et al.
ENERGY & FUELS (2007)
Characteristics of SME biodiesel-fueled diesel particle emissions and the kinetics of oxidation
Heejung Jung et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2006)
Combustion characteristics of a compression-ignition engine fuelled with diesel-dimethoxy methane. blends under various fuel injection advance angles
Y Ren et al.
APPLIED THERMAL ENGINEERING (2006)
Primary and aggregate size distributions of PM in tail pipe emissions form diesel engines
M Arai et al.
JSME INTERNATIONAL JOURNAL SERIES B-FLUIDS AND THERMAL ENGINEERING (2005)
Performance and emission evaluation of a diesel engine fueled with methyl esters of rubber seed oil
AS Ramadhas et al.
RENEWABLE ENERGY (2005)
An experimental study of the effect of octane number higher than engine requirement on the engine performance and emissions
C Sayin et al.
APPLIED THERMAL ENGINEERING (2005)
Mahua oil (Madhuca Indica seed oil) methyl ester as biodiesel-preparation and emission characterstics
S Puhan et al.
BIOMASS & BIOENERGY (2005)
Experimental evaluation of Diesel engine performance and emission using blends of jojoba oil and Diesel fuel
AS Huzayyiln et al.
ENERGY CONVERSION AND MANAGEMENT (2004)
The modification of the fuel injection rate in heavy-duty diesel engines.: Part 1:: Effects on engine performance and emissions
JM Desantes et al.
APPLIED THERMAL ENGINEERING (2004)
Predicting hydrocarbon emissions from direct injection diesel engines
PA Lakshminarayanan et al.
JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME (2002)
Effect of advanced injection timing on the performance of rapeseed oil in diesel engines
OMI Nwafor et al.
RENEWABLE ENERGY (2000)