相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Thermal performance and NOx emission characteristics studies on a premixed methane-ammonia-fueled micro-planar combustor
Yuze Sun et al.
FUEL (2021)
Combustion parameters optimization of a diesel/natural gas dual fuel engine using genetic algorithm
Jie Liu et al.
FUEL (2020)
An experimental investigation of a dual-fuel engine by using bio-fuel as the additive
Xiangyu Meng et al.
RENEWABLE ENERGY (2020)
Development of a practical reaction model of polycyclic aromatic hydrocarbon (PAH) formation and oxidation for diesel surrogate fuel
Xue Dong et al.
FUEL (2020)
Optimization of the direct injection natural gas engine under different combustion modes
Jie Liu et al.
FUEL (2020)
Potential of acetone-butanol-ethanol (ABE) as a biofuel
Yuqiang Li et al.
FUEL (2019)
Experimental study of using additive in the pilot fuel on the performance and emission trade-offs in the diesel/CNG (methane emulated) dual-fuel combustion mode
Xiangyu Meng et al.
APPLIED THERMAL ENGINEERING (2019)
Comparative study of pilot fuel property and intake air boost on combustion and performance in the CNG dual-fuel engine
Xiangyu Meng et al.
FUEL (2019)
Numerical investigation on combustion characteristics of laminar premixed n-heptane/air flames at elevated initial temperature and pressure
Huaqiang Chu et al.
JOURNAL OF THE ENERGY INSTITUTE (2019)
A numerical study of NOx and soot emissions in methane/n-heptane triple flames
Prithviraj Sabnis et al.
RENEWABLE ENERGY (2018)
A comparative study of using diesel and PODEn as pilot fuels for natural gas dual-fuel combustion
Heping Song et al.
FUEL (2017)
Influence of the biofuel isomers diethyl ether and n-butanol on flame structure and pollutant formation in premixed n-butane flames
Luc-Sy Tran et al.
COMBUSTION AND FLAME (2017)
Construction of a skeletal mechanism for butanol isomers based on the decoupling methodology
Yachao Chang et al.
ENERGY CONVERSION AND MANAGEMENT (2016)
Investigation on the pyrolysis and oxidation of toluene over a wide range conditions. II. A comprehensive kinetic modeling study
Wenhao Yuan et al.
COMBUSTION AND FLAME (2015)
Comprehensive kinetic modeling and experimental study of a fuel-rich, premixed n-heptane flame
Lars Seidel et al.
COMBUSTION AND FLAME (2015)
An experimental study of the performance, combustion and emission characteristics of a CI engine under dual fuel mode using CNG and oxygenated pilot fuel blends
Abhishek Paul et al.
ENERGY (2015)
Effect of Diesel-Ethanol-PPME (Pongamia pinata Methyl Ester) Blends as Pilot Fuel on CNG Dual-Fuel Operation of a CI Engine: A Performance-Emission Trade-Off Study
Abhishek Paul et al.
ENERGY & FUELS (2015)
Combustion performance and stability of a dual-fuel diesel-natural-gas engine
Lu Sun et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING (2015)
Towards improvement of natural gas-diesel dual fuel mode: An experimental investigation on performance and exhaust emissions
Mohand Said Lounici et al.
ENERGY (2014)
Experimental investigation of DI diesel engine operating with eucalyptus biodiesel/natural gas under dual fuel mode
L. Tarabet et al.
FUEL (2014)
Development of an n-heptane-n-butanol-PAH mechanism and its application for combustion and soot prediction
Hu Wang et al.
COMBUSTION AND FLAME (2013)
An experimental investigation of performance-emission trade off of a CI engine fueled by diesel-compressed natural gas (CNG) combination and diesel-ethanol blends with CNG enrichment
Abhishek Paul et al.
ENERGY (2013)
Development of a Phenomenological Soot Model Coupled with a Skeletal PAH Mechanism for Practical Engine Simulation
Bin Pang et al.
ENERGY & FUELS (2013)
Laminar flame speeds of transportation-relevant hydrocarbons and jet fuels at elevated temperatures and pressures
Xin Hui et al.
FUEL (2013)
Development of an n-heptane/toluene/polyaromatic hydrocarbon mechanism and its application for combustion and soot prediction
Hu Wang et al.
INTERNATIONAL JOURNAL OF ENGINE RESEARCH (2013)
Modeling of two- and three-ring aromatics formation in the pyrolysis of toluene
Akira Matsugi et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2013)
A reaction mechanism for gasoline surrogate fuels for large polycyclic aromatic hydrocarbons
Abhijeet Raj et al.
COMBUSTION AND FLAME (2012)
A comprehensive chemical kinetic combustion model for the four butanol isomers
S. Mani Sarathy et al.
COMBUSTION AND FLAME (2012)
A combustion model for IC engine combustion simulations with multi-component fuels
Youngchul Ra et al.
COMBUSTION AND FLAME (2011)
Role of peroxy chemistry in the high-pressure ignition of n-butanol - Experiments and detailed kinetic modelling
S. Vranckx et al.
COMBUSTION AND FLAME (2011)
Comprehensive reaction mechanism for n-butanol pyrolysis and combustion
Michael R. Harper et al.
COMBUSTION AND FLAME (2011)
Diesel and rapeseed methyl ester (RME) pilot fuels for hydrogen and natural gas dual-fuel combustion in compression-ignition engines
T. Korakianitis et al.
FUEL (2011)
Experimental determination of laminar burning velocity for butanol and ethanol iso-octane blends
G. Broustail et al.
FUEL (2011)
Investigation on chemical structures of premixed toluene flames at low pressure
Yuyang Li et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2011)
Shock tube investigations of ignition delays of n-butanol at elevated pressures between 770 and 1250 K
K. A. Heufer et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2011)
Skeletal mechanism generation for surrogate fuels using directed relation graph with error propagation and sensitivity analysis
Kyle E. Niemeyer et al.
COMBUSTION AND FLAME (2010)
Development of a Practical Soot Modeling Approach and Its Application to Low-Temperature Diesel Combustion
Gokul Vishwanathan et al.
COMBUSTION SCIENCE AND TECHNOLOGY (2010)
Oxidation of C1-C5 Alkane Quinternary Natural Gas Mixtures at High Pressures
D. Healy et al.
ENERGY & FUELS (2010)
Ignition and Flame Speed Kinetics of Two Natural Gas Blends With High Levels of Heavier Hydrocarbons
Gilles Bourque et al.
JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME (2010)
Chemical mechanism for high temperature combustion of engine relevant fuels with emphasis on soot precursors
G. Blanquart et al.
COMBUSTION AND FLAME (2009)
A Shock Tube Study of the Ignition of n-Heptane, n-Decane, n-Dodecane, and n-Tetradecane at Elevated Pressures
Hsi-Ping S. Shen et al.
ENERGY & FUELS (2009)
A kinetic modeling study on the oxidation of primary reference fuel-toluene mixtures including cross reactions between aromatics and aliphatics
Yasuyuki Sakai et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2009)
Modelling of aromatics and soot formation from large fuel molecules
Caroline Marchal et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2009)
A shock tube study of the auto-ignition of toluene/air mixtures at high pressures
Hsi-Ping S. Shen et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2009)
Shock-tube study of the autoignition of n-heptane/toluene/air mixtures at intermediate temperatures and high pressures
J. Herzler et al.
COMBUSTION AND FLAME (2007)
Experimental and modeling study of the oxidation of toluene
R Bounaceur et al.
INTERNATIONAL JOURNAL OF CHEMICAL KINETICS (2005)
Laminar burning velocities and Markstein lengths of aromatics at elevated temperature and pressure
RJ Johnston et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2005)
Shock-tube study of methane ignition under engine-relevant conditions: experiments and modeling
J Huang et al.
COMBUSTION AND FLAME (2004)