相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。The effect of spindle dynamics on tool-tip radial throw in micromachining
Shivang Shekhar et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Unifying lamination parameters with spectral-Tchebychev method for variable-stiffness composite plate design
Gokhan Serhat et al.
COMPOSITE STRUCTURES (2020)
Free vibration and buckling behavior of functionally graded porous plates reinforced by graphene platelets using spectral Chebyshev approach
Mirmeysam Rafiei Anamagh et al.
COMPOSITE STRUCTURES (2020)
Micro/Meso-Scale Mechanical Machining 2020: A Two-Decade State-of-the-Field Review
Johnson Samuel et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2020)
Rotational dynamics of micro-scale cutting tools
Bekir Bediz et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2019)
Measurement of high-bandwidth nanonewton forces in a low-compliance configuration
Wei Chen et al.
SENSORS AND ACTUATORS A-PHYSICAL (2019)
Spherical projectile impact using compressed air for frequency response function measurements in vibration tests
Naoki Hosoya et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)
A spectral-Tchebychev solution technique for determining vibrational behavior of thick plates having arbitrary geometry
Bekir Bediz
JOURNAL OF SOUND AND VIBRATION (2018)
A spectral-Tchebychev solution for three-dimensional dynamics of curved beams under mixed boundary conditions
Bekir Bediz et al.
JOURNAL OF SOUND AND VIBRATION (2018)
Radial throw in micromachining: Measurement and analysis
Sudhanshu Nahata et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2018)
Accurate measurement of micromachining forces through dynamic compensation of dynamometers
Emrullah Korkmaz et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2017)
Coupled vibration characteristics of shear flexible thin-walled functionally graded sandwich I-beams
Nam-Il Kim et al.
COMPOSITES PART B-ENGINEERING (2017)
A multi-orientation error separation technique for spindle metrology of miniature ultra-high-speed spindles
K. Prashanth Anandan et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2016)
Dynamic Modeling of Stacked, Multi-Plate Flexible Systems
T. Lundstrom et al.
EXPERIMENTAL MECHANICS (2015)
Development of an automatic modal pendulum for the measurement of frequency responses for the calculation of stability charts
T. Brueggemann et al.
9TH CIRP CONFERENCE ON INTELLIGENT COMPUTATION IN MANUFACTURING ENGINEERING - CIRP ICME '14 (2015)
Dynamics of ultra-high-speed (UHS) spindles used for micromachining
Bekir Bediz et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2014)
Three dimensional dynamics of pretwisted beams: A spectral-Tchebychev solution
Sinan Filiz et al.
JOURNAL OF SOUND AND VIBRATION (2014)
An impact excitation system for repeatable, high-bandwidth modal testing of miniature structures
Bekir Bediz et al.
JOURNAL OF SOUND AND VIBRATION (2014)
Dynamic characterization of multi-axis dynamometers
Emrullah Korkmaz et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2014)
Broadband vibration energy harvesting based on cantilevered piezoelectric bi-stable composites
A. F. Arrieta et al.
APPLIED PHYSICS LETTERS (2013)
Analysis of error motions of ultra-high-speed (UHS) micromachining spindles
K. Prashanth Anandan et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2013)
Finite amplitude vibrations of cantilevers of rectangular cross sections in viscous fluids
Catherine N. Phan et al.
JOURNAL OF FLUIDS AND STRUCTURES (2013)
An LDV-based methodology for measuring axial and radial error motions when using miniature ultra-high-speed (UHS) micromachining spindles
K. Prashanth Anandan et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2013)
Modeling and experimentation for three-dimensional dynamics of endmills
Bekir Bediz et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2012)
A Spectral-Tchebychev Solution for Three-Dimensional Vibrations of Parallelepipeds Under Mixed Boundary Conditions
Sinan Filiz et al.
JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2012)
Characterization of three-dimensional dynamics of piezo-stack actuators
B. Arda Gozen et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2012)
Design and evaluation of a mechanical nanomanufacturing system for nanomilling
B. Arda Gozen et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2012)
A Technique for measuring radial error motions of ultra-high-speed miniature spindles used for micromachining
K. Prashanth Anandan et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2012)
A method for open-loop control of dynamic motions of piezo-stack actuators
B. Arda Gozen et al.
SENSORS AND ACTUATORS A-PHYSICAL (2012)
An efficient vibration energy harvester with a multi-mode dynamic magnifier
Wanlu Zhou et al.
SMART MATERIALS AND STRUCTURES (2012)
A Review of Piezoelectric Energy Harvesting Based on Vibration
Heung Soo Kim et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2011)
Enhanced vibration energy harvesting using dual-mass systems
Xiudong Tang et al.
JOURNAL OF SOUND AND VIBRATION (2011)
A three-dimensional model for the dynamics of micro-endmills including bending, torsional and axial vibrations
Sinan Filiz et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2011)
A Model for Bending, Torsional, and Axial Vibrations of Micro- and Macro-Drills Including Actual Drill Geometry-Part II: Model Validation and Application
Sinan Filiz et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2010)
Topology Optimized Design, Microfabrication and Characterization of Electro-Thermally Driven Microgripper
Wilfredo M. Rubio et al.
JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2009)
A spectral-Tchebychev technique for solving linear and nonlinear beam equations
Baris Yagci et al.
JOURNAL OF SOUND AND VIBRATION (2009)
Micromilling of microbarbs for medical implants
Sinan Filiz et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)
Microendmill dynamics including the actual fluted geometry and setup errors - Part I: Model development and numerical solution
Sinan Filiz et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2008)
Microendmill dynamics including the actual fluted geometry and setup errors - Part II: Model validation and application
Sinan Filiz et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2008)
Literature survey of contact dynamics modelling
G Gilardi et al.
MECHANISM AND MACHINE THEORY (2002)
Dynamic characterisation of a flexible manipulator system
MO Tokhi et al.
ROBOTICA (2001)
Inelastic collision and the Hertz theory of impact
D Gugan
AMERICAN JOURNAL OF PHYSICS (2000)
分享论文
