☆ 4.8 Article

A finely regulated quantum well structure in quasi-2D Ruddlesden-Popper perovskite solar cells with efficiency exceeding 20%

ENERGY & ENVIRONMENTAL SCIENCE (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Environmental

Favorable grain growth of thermally stable formamidinium-methylammonium perovskite solar cells by hydrazine chloride

Luyao Wang et al.

Summary: In this study, hydrazine chloride (HACl) as an additive was used to promote favorable grain orientation during the growth of perovskite crystals, leading to improved efficiency of perovskite solar cells. HACl was found to reduce grain boundaries, enhance lattice structure, and significantly decrease carrier recombination, resulting in higher power conversion efficiency of the solar cells.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

A Systematic Review of Metal Halide Perovskite Crystallization and Film Formation Mechanism Unveiled by In Situ GIWAXS

Minchao Qin et al.

Summary: Understanding the film formation mechanisms of metal halide perovskites is crucial for achieving high-quality perovskite films and high-performance devices. However, due to the complexity of perovskite composition, dimensionality, and processing conditions, this remains a great challenge.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Design of Low Crystallinity Spiro-Typed Hole Transporting Material for Planar Perovskite Solar Cells to Achieve 21.76% Efficiency

Zihao Deng et al.

Summary: Two novel HTMs, SC and ST, were designed in this study to substitute traditional spiro-OMeTAD, with SC showing superior performance in terms of efficiency and stability. Whereas ST exhibits lower efficiency and stability due to its high crystallinity and poor solubility.

CHEMISTRY OF MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Tuning the Interfacial Dipole Moment of Spacer Cations for Charge Extraction in Efficient and Ultrastable Perovskite Solar Cells

Yuankun Qiu et al.

Summary: The design of the spacer cation in 2D perovskites plays a crucial role in defect passivation and carrier extraction. By manipulating the number of fluorine atoms on the para-position of the benzene ring, the dipole moment of 2D cations can be finely tuned, affecting the interfacial dipole at the 2D/3D heterojunction interface. A highly dipolar 2D perovskite layer at the interface between the 3D perovskite and hole-transporting material enhances charge transport and minimizes charge trapping, leading to high efficiency and stability in solar cells.

JOURNAL OF PHYSICAL CHEMISTRY C (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Nanoscale Phase Segregation in Supramolecular π-Templating for Hybrid Perovskite Photovoltaics from NMR Crystallography

Michael A. Hope et al.

Summary: The use of layered perovskites is crucial in enhancing the stability of hybrid perovskite materials and their optoelectronic device performance. This research demonstrates the use of nuclear magnetic resonance (NMR) crystallography to accurately determine the structure of layered hybrid perovskites, revealing nanoscale phase segregation. Furthermore, the application of this structure in perovskite solar cells has resulted in power conversion efficiencies exceeding 21% and improved operational stability.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

添加到收藏夹

Article Chemistry, Physical

Defect Suppression in Oriented 2D Perovskite Solar Cells with Efficiency over 18% via Rerouting Crystallization Pathway

Yi Yang et al.

Summary: A new crystallization pathway (RCP) is reported to suppress defects in vertically oriented 2D perovskite films, leading to highly homogeneous and stable films with improved optoelectronic properties. By controlling the adsorption of additives on crystal planes, large grains are encouraged to form, ultimately enhancing the performance of solar cells.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Elucidation of the Formation Mechanism of Highly Oriented Multiphase Ruddlesden-Popper Perovskite Solar Cells

Gyumin Jang et al.

Summary: This study systematically examines the formation mechanism of highly oriented multiphase 2D-RPP perovskites, highlighting the nucleation process of different perovskite phases and the impact of organic cation segregation on the film structure. Utilizing these findings, high-performance 2D-RPP films were successfully employed in perovskite solar cells, demonstrating remarkable efficiency and enhanced stability compared to traditional 3D perovskites.

ACS ENERGY LETTERS (2021)

添加到收藏夹

Article Energy & Fuels

Intact 2D/3D halide junction perovskite solar cells via solid-phase in-plane growth

Yeoun-Woo Jang et al.

Summary: Researchers have developed a solid-phase method to grow phase-pure two-dimensional perovskites in perovskite solar cells, enhancing device efficiency and stability. By growing a stable two-dimensional film on top of a three-dimensional film using a solvent-free method, an intact 2D/3D heterojunction is formed, resulting in high photovoltage in the device.

NATURE ENERGY (2021)

添加到收藏夹

Article Chemistry, Physical

Direct Observation on p- to n-Type Transformation of Perovskite Surface Region during Defect Passivation Driving High Photovoltaic Efficiency

Shaobing Xiong et al.

Summary: The use of natural additive capsaicin in perovskite solar cells leads to defect passivation and transformation of surface energetics, resulting in improved charge transport, efficiency, and stability. This approach shows potential for significant enhancement of PSC performance.

JOULE (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

High-Quality Ruddlesden-Popper Perovskite Film Formation for High-Performance Perovskite Solar Cells

Pengyun Liu et al.

Summary: Perovskite solar cells have witnessed rapid development in the past decade, with particular attention on low-dimensional Ruddlesden-Popper (RP) perovskite-based cells due to their stability. While RP perovskite-based cells are more stable, their efficiency still lags behind 3D counterparts, highlighting the importance of improving the quality of RP perovskite films through innovative film formation processes.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Formation of Corrugated n=1 2D Tin Iodide Perovskites and Their Use as Lead-Free Solar Absorbers

Benny Febriansyah et al.

Summary: Significant progress has been made in the development of materials and devices based on low-dimensional hybrid group 14 metal halide perovskites. This study focused on the impact of templating cations on the structure of n = 1 2D tin iodide perovskites, and demonstrated their potential as light absorbers for photovoltaic cells. By tuning organic dications, researchers induced the formation of unique structures with very short separations between inorganic layers, resulting in high photon-to-current and power conversion efficiencies for lead-free solar cells.

ACS NANO (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Bottom-Up Quasi-Epitaxial Growth of Hybrid Perovskite from Solution Process-Achieving High-Efficiency Solar Cells via Template -Guided Crystallization

Hengkai Zhang et al.

Summary: A universal solution-processed bottom-up quasi-epitaxial growth method for highly oriented alpha-FAPbI(3) perovskite film is reported in this study. In situ GIWAXS was used to visualize the intermediate phase formation at the bottom of the film, serving as a guiding template for subsequent annealing process. The epitaxially grown BAFAMA perovskite film showed increased crystallinity and stability in solar cell applications.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Low-Dimensional Inorganic Tin Perovskite Solar Cells Prepared by Templated Growth

Hansheng Li et al.

Summary: Manipulating dimensionality and nanostructures based on precise control of crystal growth kinetics boosts the development of perovskite optoelectronic materials and devices. Here, a low-dimensional inorganic tin halide perovskite, CsSnBrI2-x(SCN)(x), with a mixed 2D and 3D structure is fabricated, showing superior performance and high power conversion efficiency.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells

Jaeki Jeong et al.

Summary: The research introduces a new concept of using formate anion to suppress defects in metal halide perovskite films and enhance film crystallinity, leading to improved efficiency and stability of solar cells.

NATURE (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Interfacial toughening with self-assembled monolayers enhances perovskite solar cell reliability

Zhenghong Dai et al.

Summary: The use of iodine-terminated self-assembled monolayer (I-SAM) in perovskite solar cells (PSCs) leads to increased adhesion toughness at the interface, improved power conversion efficiency, reduced hysteresis, and enhanced operational stability. This is attributed to a decrease in hydroxyl groups at the interface and higher interfacial toughness achieved with I-SAM treatment.

SCIENCE (2021)

添加到收藏夹

Article Energy & Fuels

Stabilization of formamidinium lead triiodide α-phase with isopropylammonium chloride for perovskite solar cells

Byung-wook Park et al.

Summary: The study shows that using isopropylammonium to stabilize the perovskite structure greatly improves the long-term stability of solar cells, leading to enhanced efficiency performance.

NATURE ENERGY (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

2D/3D perovskite engineering eliminates interfacial recombination losses in hybrid perovskite solar cells

Albertus A. Sutanto et al.

Summary: The study emphasizes the importance of interface engineering and design in optimizing multilayer device stacks, particularly in addressing interface issues in 2D/3D perovskite solar cells. It proposes methods to enhance device efficiency and stability by understanding the interface energetics and forming a p-n junction.

CHEM (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Spontaneous Formation of Upper Gradient 2D Structure for Efficient and Stable Quasi-2D Perovskites

Dengxue Li et al.

Summary: By incorporating hydrophobic 4TFBZA into MAPbI(3), highly efficient and stable quasi-2D hybrid perovskite solar cells have been successfully demonstrated. The structure can effectively passivate trap states, restrain ion motion, suppress perovskite decomposition, and improve both thermal and moisture stability.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Tetrafluoroborate-Induced Reduction in Defect Density in Hybrid Perovskites through Halide Management

Satyawan Nagane et al.

Summary: This study investigates the effect of introducing BF4- ions in the surface treatment of MAPbI(3) perovskite optoelectronic devices. The results show that BF4- reduces non-radiative charge-carrier recombination and increases photoluminescence quantum yield.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Optics

Stable and low-photovoltage-loss perovskite solar cells by multifunctional passivation

Guang Yang et al.

Summary: An effective approach to reduce photovoltage loss in metal halide perovskite solar cells is through the passivation of internal bulk defects and dimensionally graded two-dimensional perovskite interface defects. This method resulted in significantly low photovoltage loss and improved operational stability across different bandgap systems.

NATURE PHOTONICS (2021)

添加到收藏夹

Article Chemistry, Physical

Overcoming the carrier transport limitation in Ruddlesden-Popper perovskite films by using lamellar nickel oxide substrates

Jianghu Liang et al.

Summary: Quasi-2D Ruddlesden-Popper perovskite films composed of multiple 2D phases exhibit limited carrier transportation due to low-n-value phases (n = 1 and n = 2). Using a lamellar nickel oxide substrate as a hole transporting layer can improve fill factor and open-circuit voltage, leading to a significantly enhanced power conversion efficiency for PEA and FPEA based 2D perovskite solar cells.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

High-throughput large-area vacuum deposition for high-performance formamidine-based perovskite solar cells

Jiangshan Feng et al.

Summary: An efficient vacuum deposition approach for perovskite solar cells has been developed, enabling the fabrication of high-quality films on glass and flexible substrates. The optimization of in-vacuum annealing temperature can significantly improve the efficiency of PSCs to 21.32%, the highest value achieved through vacuum deposition, with excellent long-term stability in a solvent-free and air-free environment.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Molecular Engineering for Two-Dimensional Perovskites with Photovoltaic Efficiency Exceeding 18%

Guangbao Wu et al.

Summary: The study presents a strategy utilizing molecular van der Waals interaction to modify crystallization, phase distribution, and quantum-confined behaviors in 2D perovskites. With the optimal amylamine (AA) spacer, a champion PCE of 18.42% has been achieved.

MATTER (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Self-passivation of low-dimensional hybrid halide perovskites guided by structural characteristics and degradation kinetics

Ke Meng et al.

Summary: This study presents an effective self-passivation strategy to enhance the efficiency and stability of BA-based LDP solar cells. The unique crystal stacking pattern of the BA-based LDP film containing highly oriented perovskite crystals of different layer thicknesses is revealed.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

添加到收藏夹

Article Energy & Fuels

Two-dimensional Ruddlesden-Popper layered perovskite solar cells based on phase-pure thin films

Chao Liang et al.

Summary: Introducing molten salt spacers can produce phase-pure quantum wells and enhance the performance of solar cells. Two-dimensional Ruddlesden-Popper layered metal-halide perovskites have better stability and optoelectronic properties compared to their three-dimensional counterparts.

NATURE ENERGY (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Spacer Cation Tuning Enables Vertically Oriented and Graded Quasi-2D Perovskites for Efficient Solar Cells

Ze Wang et al.

Summary: Halide substitution in phenethylammonium spacer cations is an effective strategy to enhance the performance of PEA based perovskite solar cells. The substitution eliminates the n = 1 2D perovskite phase, leading to perpendicular crystal orientation and orderly distribution of different n-phases in the films. This results in significantly improved power conversion efficiency and stability in the PSCs.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Revealing Crystallization Dynamics and the Compositional Control Mechanism of 2D Perovskite Film Growth by In Situ Synchrotron-Based GIXRD

Liang Kuai et al.

ACS ENERGY LETTERS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Double-Sided Surface Passivation of 3D Perovskite Film for High-Efficiency Mixed-Dimensional Perovskite Solar Cells

Md Arafat Mahmud et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

添加到收藏夹

Article Optics

Efficient and stable Ruddlesden-Popper perovskite solar cell with tailored interlayer molecular interaction

Hui Ren et al.

NATURE PHOTONICS (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Templated growth of oriented layered hybrid perovskites on 3D-like perovskites

Jifei Wang et al.

NATURE COMMUNICATIONS (2020)

添加到收藏夹

Article Chemistry, Physical

Tuning the Energetic Landscape of Ruddlesden-Popper Perovskite Films for Efficient Solar Cells

Shuyan Shao et al.

ACS ENERGY LETTERS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Phase Distribution and Carrier Dynamics in Multiple-Ring Aromatic Spacer-Based Two-Dimensional Ruddlesden-Popper Perovskite Solar Cells

Zhiyuan Xu et al.

ACS NANO (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Self-Crystallized Multifunctional 2D Perovskite for Efficient and Stable Perovskite Solar Cells

Hobeom Kim et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Graded 2D/3D Perovskite Heterostructure for Efficient and Operationally Stable MA-Free Perovskite Solar Cells

Qin Yao et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Thiophene Cation Intercalation to Improve Band-Edge Integrity in Reduced-Dimensional Perovskites

Chuyi Ni et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Reduced-dimensional perovskite photovoltaics with homogeneous energy landscape

Tingwei He et al.

NATURE COMMUNICATIONS (2020)

添加到收藏夹

Article Chemistry, Physical

Photoluminescence-Based Characterization of Halide Perovskites for Photovoltaics

Thomas Kirchartz et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Organic Cation Alloying on Intralayer A and Interlayer A′ sites in 2D Hybrid Dion-Jacobson Lead Bromide Perovskites (A′)(A)Pb2B7

Lingling Mao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Unraveling the Crystallization Kinetics of 2D Perovskites with Sandwich-Type Structure for High-Performance Photovoltaics

Jingnan Song et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Organic-Salt-Assisted Crystal Growth and Orientation of Quasi-2D Ruddlesden-Popper Perovskites for Solar Cells with Efficiency over 19%

Hongtao Lai et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Suppressing Defects-Induced Nonradiative Recombination for Efficient Perovskite Solar Cells through Green Antisolvent Engineering

Wenzhan Xu et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Stable Quasi-2D Perovskite Solar Cells with Efficiency over 18% Enabled by Heat-Light Co-Treatment

Xiaomei Lian et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Trap-Enabled Long-Distance Carrier Transport in Perovskite Quantum Wells

Chunyi Zhao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Solid-State NMR and NQR Spectroscopy of Lead-Halide Perovskite Materials

Laura Piveteau et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

添加到收藏夹

Article Chemistry, Physical

Compositional optimization of a 2D-3D heterojunction interface for 22.6% efficient and stable planar perovskite solar cells

Maosheng He et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Accessing Highly Oriented Two-Dimensional Perovskite Films via Solvent-Vapor Annealing for Efficient and Stable Solar Cells

Xiaoming Zhao et al.

NANO LETTERS (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Universal and versatile morphology engineering via hot fluorous solvent soaking for organic bulk heterojunction

Tong Shan et al.

NATURE COMMUNICATIONS (2020)

添加到收藏夹

Article Chemistry, Physical

Dynamical evolution of the 2D/3D interface: a hidden driver behind perovskite solar cell instability

Albertus A. Sutanto et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Universal approach toward high-efficiency two-dimensional perovskite solar cells via a vertical-rotation process

Yi Yang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Molecular aspects of organic cations affecting the humidity stability of perovskites

Bohyung Kim et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Enhanced Charge Transport in 2D Perovskites via Fluorination of Organic Cation

Fei Zhang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Tailoring vertical phase distribution of quasi-two-dimensional perovskite films via surface modification of hole-transporting layer

Tiefeng Liu et al.

NATURE COMMUNICATIONS (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Strain engineering in perovskite solar cells and its impacts on carrier dynamics

Cheng Zhu et al.

NATURE COMMUNICATIONS (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Unveiling the operation mechanism of layered perovskite solar cells

Yun Lin et al.

NATURE COMMUNICATIONS (2019)

添加到收藏夹

Article Chemistry, Physical

High-Performance Perovskite Solar Cells with Enhanced Environmental Stability Based on a (p-FC6H4C2H4NH3)2[PbI4] Capping Layer

Qin Zhou et al.

ADVANCED ENERGY MATERIALS (2019)

添加到收藏夹

Article Optics

Surface passivation of perovskite film for efficient solar cells

Qi Jiang et al.

NATURE PHOTONICS (2019)

添加到收藏夹

Article Chemistry, Physical

Reverse-Graded 2D Ruddlesden-Popper Perovskites for Efficient Air-Stable Solar Cells

Yi Wei et al.

ADVANCED ENERGY MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Controlling Solvate Intermediate Growth for Phase-Pure Organic Lead Iodide Ruddlesden-Popper (C4H9NH3)(2)(CH3NH3)(n-1)PbnI3n+1 Perovskite Thin Films

Clayton J. Dahlman et al.

CHEMISTRY OF MATERIALS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Fine Multi-Phase Alignments in 2D Perovskite Solar Cells with Efficiency over 17% via Slow Post-Annealing

Guangbao Wu et al.

ADVANCED MATERIALS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Controlling the Growth Kinetics and Optoelectronic Properties of 2D/3D Lead-Tin Perovskite Heterojunctions

Edoardo Ruggeri et al.

ADVANCED MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Optimal Interfacial Engineering with Different Length of Alkylammonium Halide for Efficient and Stable Perovskite Solar Cells

Hyeonwoo Kim et al.

ADVANCED ENERGY MATERIALS (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

Two-Dimensional Hybrid Halide Perovskites: Principles and Promises

Lingling Mao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

添加到收藏夹

Review Nanoscience & Nanotechnology

Dimensional tailoring of hybrid perovskites for photovoltaics

Giulia Grancini et al.

NATURE REVIEWS MATERIALS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Conformal monolayer contacts with lossless interfaces for perovskite single junction and monolithic tandem solar cells

Amran Al-Ashouri et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

An interface stabilized perovskite solar cell with high stabilized efficiency and low voltage loss

Jason J. Yoo et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

添加到收藏夹

Article Chemistry, Physical

Precise Control of Crystal Growth for Highly Efficient CsPbI2Br Perovskite Solar Cells

Weijie Chen et al.

JOULE (2019)

添加到收藏夹

Article Chemistry, Physical

Methylammonium Chloride Induces Intermediate Phase Stabilization for Efficient Perovskite Solar Cells

Minjin Kim et al.

JOULE (2019)

添加到收藏夹

Article Chemistry, Physical

Uniform Permutation of Quasi-2D Perovskites by Vacuum Poling for Efficient, High-Fill-Factor Solar Cells

Jia Zhang et al.

JOULE (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Exploration of Crystallization Kinetics in Quasi Two-Dimensional Perovskite and High Performance Solar Cells

Ning Zhou et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Phase Transition Control for High Performance Ruddlesden-Popper Perovskite Solar Cells

Xu Zhang et al.

ADVANCED MATERIALS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Synthetic Control over Quantum Well Width Distribution and Carrier Migration in Low-Dimensional Perovskite Photovoltaics

Andrew H. Proppe et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

添加到收藏夹

Article Optics

Hybrid perovskite films approaching the radiative limit with over 90% photoluminescence quantum efficiency

Ian L. Braly et al.

NATURE PHOTONICS (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Origin of vertical orientation in two-dimensional metal halide perovskites and its effect on photovoltaic performance

Alexander Z. Chen et al.

NATURE COMMUNICATIONS (2018)

添加到收藏夹

Article Chemistry, Physical

Aligned and Graded Type-II Ruddlesden-Popper Perovskite Films for Efficient Solar Cells

Jian Qing et al.

ADVANCED ENERGY MATERIALS (2018)

添加到收藏夹

Article Chemistry, Physical

Quantitative analysis of the transient photoluminescence of CH3NH3PbI3/PC61BM heterojunctions by numerical simulations

Benedikt Krogmeier et al.

SUSTAINABLE ENERGY & FUELS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Two-Dimensional Ruddlesden-Popper Perovskite with Nanorod-like Morphology for Solar Cells with Efficiency Exceeding 15%

Hongtao Lai et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

添加到收藏夹

Article Chemistry, Physical

Compositional and orientational control in metal halide perovskites of reduced dimensionality

Rafael Quintero-Bermudez et al.

NATURE MATERIALS (2018)

添加到收藏夹

Article Multidisciplinary Sciences

2D perovskite stabilized phase-pure formamidinium perovskite solar cells

Jin-Wook Lee et al.

NATURE COMMUNICATIONS (2018)

添加到收藏夹

Article Chemistry, Physical

Two-Dimensional Perovskite Solar Cells with 14.1% Power Conversion Efficiency and 0.68% External Radiative Efficiency

Weifei Fu et al.

ACS ENERGY LETTERS (2018)

添加到收藏夹

Article Energy & Fuels

Visualization and suppression of interfacial recombination for high-efficiency large-area pin perovskite solar cells

Martin Stolterfoht et al.

NATURE ENERGY (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Oriented Quasi-2D Perovskites for High Performance Optoelectronic Devices

Rong Yang et al.

ADVANCED MATERIALS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Additive engineering for high-performance room-temperature-processed perovskite absorbers with micron-size grains and microsecond-range carrier lifetimes

Qiwei Han et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Observation of Internal Photoinduced Electron and Hole Separation in Hybrid Two-Dimentional Perovskite Films

Junxue Liu et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

添加到收藏夹

Article Multidisciplinary Sciences

PEROVSKITE PHYSICS Extremely efficient internal exciton dissociation through edge states in layered 2D perovskites

J. -C. Blancon et al.

SCIENCE (2017)

添加到收藏夹

Article Multidisciplinary Sciences

High-efficiency two-dimensional Ruddlesden-Popper perovskite solar cells

Hsinhan Tsai et al.

NATURE (2016)

添加到收藏夹

Article Optics

Sensitive X-ray detectors made of methylammonium lead tribromide perovskite single crystals

Haotong Wei et al.

NATURE PHOTONICS (2016)

添加到收藏夹

Article Chemistry, Physical

sec-Butyl alcohol assisted pinhole-free perovskite film growth for high-performance solar cells

Fan Zhang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

添加到收藏夹

Article Chemistry, Physical

Photoluminescence Lifetimes Exceeding 8 μs and Quantum Yields Exceeding 30% in Hybrid Perovskite Thin Films by Ligand Passivation

Dane W. deQuilettes et al.

ACS ENERGY LETTERS (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

2D Homologous Perovskites as Light-Absorbing Materials for Solar Cell Applications

Duyen H. Cao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Improving efficiency of planar hybrid CH3NH3PbI3-xClx perovskite solar cells by isopropanol solvent treatment

Xueyan Wang et al.

ORGANIC ELECTRONICS (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Layered Hybrid Perovskite Solar-Cell Absorber with Enhanced Moisture Stability

Ian C. Smith et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2014)

添加到收藏夹

Article Chemistry, Physical

Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells

Nam Joong Jeon et al.

NATURE MATERIALS (2014)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.