相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Effect analysis on SOC values of the power lithium manganate battery during discharging process and its intelligent estimation
Hongyan Zuo et al.
ENERGY (2022)
Effects analysis on active equalization control of lithium-ion batteries based on intelligent estimation of the state-of-charge
E. Jiaqiang et al.
ENERGY (2022)
Effects analysis on heat dissipation characteristics of lithium-ion battery thermal management system under the synergism of phase change material and liquid cooling method
Feng Yi et al.
RENEWABLE ENERGY (2022)
A numerical study on non-premixed H2/air flame stability in a micro-combustor with a slotted bluff-body
Linhong Li et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)
Characteristics of NH3/H2/air flames in a combustor fired by a swirl and bluff-body stabilized burner
Miguel C. Franco et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2021)
Effect of preheated fuel supply by gas reflux on thermodynamic characteristics in a cavity-based integrated combustor
Junjie Miao et al.
AEROSPACE SCIENCE AND TECHNOLOGY (2021)
NOx emission performance assessment on a perforated plate-implemented premixed ammonia-oxygen micro-combustion system
Tao Cai et al.
CHEMICAL ENGINEERING JOURNAL (2021)
Non-premixed combustion characteristics and thermal performance of a catalytic combustor for micro-thermophotovoltaic systems
Linhong Li et al.
ENERGY (2021)
Investigation on H2/air combustion with C3H8 addition in the combustor with part/full porous medium
Qingguo Peng et al.
ENERGY CONVERSION AND MANAGEMENT (2021)
Numerical investigation on a multi-channel micro combustor fueled with hydrogen for a micro-thermophotovoltaic system
Ziqiang He et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)
Thermal performance improvement of premixed hydrogen/air fueled cylindrical micro-combustor using a preheater-conductor plate
Shiguang Wu et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)
Effect of convex platform structure on hydrogen and oxygen combustion characteristics in micro combustor
Jianfeng Pan et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)
Mitigating NOx emissions from an ammonia-fueled micro-power system with a perforated plate implemented
Tao Cai et al.
JOURNAL OF HAZARDOUS MATERIALS (2021)
Effect of Different Technologies on Performance Enhancement of the Micro-Combustor for the Micro Thermophotovoltaic Application: A Review
Dongli Tan et al.
ENERGIES (2021)
Process in micro-combustion and energy conversion of micro power system: A review
E. Jiaqiang et al.
ENERGY CONVERSION AND MANAGEMENT (2021)
High-performance three-body near-field thermophotovoltaic energy conversion
Chunzhuo Dang et al.
JOURNAL OF QUANTITATIVE SPECTROSCOPY & RADIATIVE TRANSFER (2021)
Study on Combustion Characteristics of Premixed Methane-Oxygen in a Cylindrical Porous Media Combustor
Evans K. Quaye et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2021)
Recent progress in flame stabilization technologies for combustion-based micro energy and power systems
Jianlong Wan et al.
FUEL (2021)
Life Cycle Assessment (LCA) for use on renewable sourced hydrogen fuel cell buses vs diesel engines buses in the city of Rosario, Argentina
Leonardo Iannuzzi et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)
Enhance the energy and exergy performance of hydrogen combustion by improving the micro-combustor outlet in thermofluidic systems
Salar Mohseni et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)
Numerical study on the influence of controllable flow ratio on combustion characteristics of a controllable central slotted bluff body and cavity combined micro combustor
Fulei Xu et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)
A novel Swiss-roll micro-combustor with double combustion chambers: A numerical investigation on effect of solid material on premixed CH4/air flame blow-off limit
Lun Ma et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)
Optoelectronic analysis of spectrally selective nanophotonic metafilm cell for thermophotovoltaic energy conversion
Qing Ni et al.
JOURNAL OF QUANTITATIVE SPECTROSCOPY & RADIATIVE TRANSFER (2021)
Heat transfer enhancement and exergy efficiency improvement of a micro combustor with internal spiral fins for thermophotovoltaic systems
Ziqiang He et al.
APPLIED THERMAL ENGINEERING (2021)
Laminar non-premixed flame patterns in compact micro disc-combustor with annular step and radial preheated channel
Jianlong Wan et al.
COMBUSTION AND FLAME (2021)
Numerical investigations on hydrogen-fueled micro-cylindrical combustors with cavity for micro-thermophotovoltaic applications
Wei Zuo et al.
ENERGY (2021)
Heat recirculation and heat losses in porous micro-combustors: Effects of wall and porous media properties and combustor dimensions
Jun Li et al.
ENERGY (2021)
Effect analysis on energy conversion enhancement and NOx emission reduction of ammonia/hydrogen fuelled wavy micro-combustor for micro-thermophotovoltaic application
Lei Han et al.
FUEL (2021)
Thermal performance and NOx emission characteristics studies on a premixed methane-ammonia-fueled micro-planar combustor
Yuze Sun et al.
FUEL (2021)
Energy conversion efficiency improvement studies on unconventional premixed micro-combustors partially inserted with porous medium
Siliang Ni et al.
FUEL PROCESSING TECHNOLOGY (2021)
Effects of different poses and wind speeds on wind-induced vibration characteristics of a dish solar concentrator system
Hongyan Zuo et al.
RENEWABLE ENERGY (2021)
Advancements of combustion technologies in the ammonia-fuelled engines
Meng-Choung Chiong et al.
ENERGY CONVERSION AND MANAGEMENT (2021)
Evaluation of NOx emissions characteristics in a CO2-Free micro-power system by implementing a perforated plate
Tao Cai et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)
Numerical investigation of a novel micro combustor with a central and bilateral slotted blunt body
Ziqiang He et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)
A novel combined baffle-cavity micro-combustor configuration for Micro-Thermo-Photo-Voltaic applications
E. Amani et al.
CHINESE JOURNAL OF CHEMICAL ENGINEERING (2020)
A review on catalytic methane combustion at low temperatures: Catalysts, mechanisms, reaction conditions and reactor designs
Li He et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2020)
A review on heat enhancement in thermal energy conversion and management using Field Synergy Principle
Xiaohuan Zhao et al.
APPLIED ENERGY (2020)
Towards the development of a high power density, high efficiency, micro power generator
B. Aravind et al.
APPLIED ENERGY (2020)
Reliable state of charge estimation of battery packs using fuzzy adaptive federated filtering
Lin Hu et al.
APPLIED ENERGY (2020)
Optimum selective emitters for efficient thermophotovoltaic conversion
Sakib Hassan et al.
APPLIED PHYSICS LETTERS (2020)
Numerical analysis of heat recuperation in micro-combustors using internal recirculation
Eliton Fontana et al.
CHEMICAL ENGINEERING SCIENCE (2020)
Investigation on the effect of bluff body ball on the combustion characteristics for methane/oxygen in micro combustor
Jianfeng Pan et al.
ENERGY (2020)
Numerical investigations on thermal performance enhancement of hydrogen-fueled micro planar combustors with injectors for micro-thermophotovoltaic applications
Wei Zuo et al.
ENERGY (2020)
Comparison of lithium ion Batteries, hydrogen fueled combustion Engines, and a hydrogen fuel cell in powering a small Unmanned Aerial Vehicle
Christopher Depcik et al.
ENERGY CONVERSION AND MANAGEMENT (2020)
Effects of channel length on propagation behaviors of non-premixed H2-air flames in Y-shaped micro combustors
Ying Xiang et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Numerical investigation on the performance of bluff body augmented micro cavity-combustor
Zheng Zhang et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Combustion characteristics and thermal enhancement of premixed hydrogen/air in micro combustor with pin fin arrays
Ziqiang He et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Effects of rectangular rib on exergy efficiency of a hydrogen-fueled micro combustor
Qingqing Li et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Investigation of microcombustion reforming of ethane/air and micro-Tubular Solid Oxide Fuel Cells
Ryan J. Milcarek et al.
JOURNAL OF POWER SOURCES (2020)
Bluff-body effect on thermal and NOx emission characteristics in a micro-planar combustor fueled with premixed ammonia-oxygen
Tao Cai et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2020)
Diagnosis and Improvement of Combustion Characteristics of Methanol Miniature Reciprocating Piston Internal Combustion Engine
Gangzhi Tang et al.
MICROMACHINES (2020)
Effect of hydrogen addition on conjugate heat transfer in a planar micro-combustor with the detailed reaction mechanism: An analytical approach
Mostafa Pourali et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Comparison of combustion efficiency of micro hydrogen jet flames confined in cylindrical tubes of different diameters
Ming Zhao et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2020)
Investigation on premixed methane/air combustion characteristics in heat recirculation micro combustor with separating cylinder
Ziqiang He et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2020)
Spanwise recirculation zone structure of a bluff body stabilized flame
Christopher A. Fugger et al.
COMBUSTION AND FLAME (2020)
Effects of bluff-body on the thermal performance of micro thermophotovoltaic system based on porous media combustion
Peng Qian et al.
APPLIED THERMAL ENGINEERING (2020)
Thermodynamics and entropy generation studies of a T-shaped micro-combustor: Effects of porous medium and ring-shaped ribs
Siliang Ni et al.
APPLIED THERMAL ENGINEERING (2020)
Green C2-C4 hydrocarbon production through direct CO2 hydrogenation with renewable hydrogen: Process development and techno-economic analysis
Thai Ngan Do et al.
ENERGY CONVERSION AND MANAGEMENT (2020)
Experimental investigation of the flow in a micro-channelled combustor and its relation to flame behaviour
Ajay Gupta et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2020)
Excess enthalpy combustion of methane-air in a novel micro non-premixed combustor with a flame holder and preheating channels
Jianlong Wan et al.
FUEL (2020)
Blowout limit of premixed flame in a micro preheated combustor with a flame holder at different blockage ratios
Jianlong Wan et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Dependence of the blowout limit on flow structure, heat transfer, and pressure loss in a bluff-body micro-combustor
Minghao Wang et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Effects of confinement length of the central toroidal recirculation zone partly confined by the small pilot stage chamber on ignition characteristics
Yuwei Wang et al.
AEROSPACE SCIENCE AND TECHNOLOGY (2020)
Influences of liquid fuel atomization and flow rate fluctuations on spray combustion instabilities in a backward-facing step combustor
Abhishek L. Pillai et al.
COMBUSTION AND FLAME (2020)
Development of an ultra-high capacity hydrocarbon fuel based micro thermoelectric power generator
B. Aravind et al.
ENERGY (2020)
A comparative study of thermal kinetics and combustion performance of Al/CuO, Al/Fe2O3 and Al/MnO2 nanothermites
Jiaxing Song et al.
VACUUM (2020)
Anchoring of turbulent premixed hydrogen/air flames at externally heated walls
Sebastian Klukas et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Experimental study and optimization of a combustion-based micro thermoelectric generator
Wei Wang et al.
APPLIED THERMAL ENGINEERING (2020)
Modeling syngas combustion performance of a can combustor with rotating casing for an innovative micro gas turbine
Maaz Ajvad et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
NOx emission and thermal performances studies on premixed ammonia-oxygen combustion in a CO2-free micro-planar combustor
Tao Cai et al.
FUEL (2020)
Effects of heat transfer on flame stability limits in a planar micro-combustor partially filled with porous medium
Qingqing Li et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2019)
Effect of the cavity aft ramp angle on combustion efficiency of lean hydrogen/air flames in a micro cavity-combustor
Linhong Li et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
Flame characteristics depending on recirculating flows in a non-premixed micro combustor with varying baffles
Won Hyun Kim et al.
APPLIED THERMAL ENGINEERING (2019)
Comparison of combustion efficiency between micro combustors with single- and double-layered walls: A numerical study
Aiwu Fan et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2019)
Experimental investigation on non-premixed CH4/air combustion in a novel miniature Swiss-roll combustor
Shixuan Wang et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2019)
Numerical comparison study of methane catalytic combustion characteristic between newly proposed opposed counter-flow micro-combustor and the conventional ones
Yunfei Yan et al.
ENERGY (2019)
Numerical investigations on combustion and emission characteristics of a novel elliptical jet-stabilized model combustor
Xiao Yang et al.
ENERGY (2019)
Numerical and entropy studies of hydrogen-fuelled micro-combustors with different geometric shaped ribs
Siliang Ni et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
MEMS-Based Thermoelectric-Photoelectric Integrated Power Generator
Jiabin Yan et al.
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS (2019)
Experimental and numerical study on the transition conditions and influencing factors of hetero-/homogeneous reaction for H2/Air mixture in micro catalytic combustor
Jianfeng Pan et al.
APPLIED THERMAL ENGINEERING (2019)
Experimental and numerical investigation of a micro-thermophotovoltaic system with different backward-facing steps and wall thicknesses
Qingguo Peng et al.
ENERGY (2019)
Experimental study and numerical analysis of the scaling effect on the flame stabilization of propane/air mixture in the micro-scale porous combustor
Wei Wang et al.
ENERGY (2019)
Two-dimensional analytical investigation of conjugate heat transfer in a finite-length planar micro-combustor for a hydrogen-air mixture
M. Pourali et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
Catastrophic analysis on the stability of a large dish solar thermal power generation system with wind-induced vibration
Hongyan Zuo et al.
SOLAR ENERGY (2019)
Micro-tubular solid oxide fuel cell stack operated with catalytically enhanced porous media fuel-rich combustor
Hongyu Zeng et al.
ENERGY (2019)
Effects of flow rate and fuel/air ratio on propagation behaviors of diffusion H2/air flames in a micro-combustor
Ying Xiang et al.
ENERGY (2019)
Extinction limits of an ammonia/air flame propagating in a turbulent field
Ryo Ichimura et al.
FUEL (2019)
Numerical study on stability and influencing factors of heterogeneous reaction for hydrogen/oxygen mixture in planar catalytic micro combustor
Jianfeng Pan et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
Influence of controllable slit width and angle of controllable flow on hydrogen/air premixed combustion characteristics in micro combustor with both sides-slitted bluff body
Yunfei Yan et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
Comparative study of combustion and thermal performance in a swirling micro combustor under premixed and non-premixed modes
Xiao Yang et al.
APPLIED THERMAL ENGINEERING (2019)
Thermal management in catalytic heat-recirculating micro-combustors: A computational fluid dynamics study
Junjie Chen et al.
APPLIED THERMAL ENGINEERING (2019)
Numerical comparison of H2/air catalytic combustion characteristic of micro-combustors with a conventional, slotted or controllable slotted bluff body
Yunfei Yan et al.
ENERGY (2019)
Planck's generalised radiation law and its implications for cathodoluminescence spectra
B. G. Mendis
ULTRAMICROSCOPY (2019)
A comprehensive experimental characterisation of a novel porous media combustion-based thermophotovoltaic system with controlled emission
Philippe Gentillon et al.
APPLIED ENERGY (2019)
Experimental investigation on premixed hydrogen/air combustion in varied size combustors inserted with porous medium for thermophotovoltaic system applications
Qingguo Peng et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
Investigation of combustion and emission performance of a micro combustor: Effects of bluff body insertion and oxygen enriched combustion conditions
Harun Yilmaz
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
Experimental investigation on the scale effects on diffusion H2/air flames in Y-shaped micro-combustors
Ying Xiang et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
Comparison of the effect of heat release and products from heterogeneous reaction on homogeneous combustion of H2/O2 mixture in the catalytic micro combustor
Qingbo Lu et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
The role of heat recirculation and flame stabilization in the formation of NOx in a thermo-photovoltaic micro-combustor step wall
Bahamin Bazooyar et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
Numerical study of the premixed propane/air flame characteristics in a partially filled micro porous combustor
Wei Wang et al.
ENERGY (2019)
Enhancement of thermal performance by converging-diverging channel in a micro tube combustor fueled by premixed hydrogen/air
Xiao Yang et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
Numerical study on premixed hydrogen/air combustion characteristics in micro-combustor with slits on both sides of the bluff body
Yunfei Yan et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
Analysis of flame stabilization to a thermo-photovoltaic micro-combustor step in turbulent premixed hydrogen flame
Bahamin Bazooyar et al.
FUEL (2019)
Flame dynamics in a stepped micro-combustor for non-adiabatic wall conditions
Malhar Malushte et al.
THERMAL SCIENCE AND ENGINEERING PROGRESS (2019)
A new approach to the generalization of Planck's law of black-body radiation
Sreeja Loho Choudhury et al.
ANNALS OF PHYSICS (2018)
Micro-thermoelectric generators based on through glass pillars with high output voltage enabled by large temperature difference
Shuang Liu et al.
APPLIED ENERGY (2018)
Portable thermoelectric power generation based on catalytic combustor for low power electronic equipment
C. Fanciulli et al.
APPLIED ENERGY (2018)
Experimental investigations on a new high intensity dual microcombustor based thermoelectric micropower generator
B. Aravind et al.
APPLIED ENERGY (2018)
Study on the new hybrid thermodynamic cycle for an improved micro swing engine with heat recovery process
Chen Xia et al.
APPLIED THERMAL ENGINEERING (2018)
Effect of heat and mass transfer on the combustion stability in catalytic micro-combustors
Junjie Chen et al.
APPLIED THERMAL ENGINEERING (2018)
Experimental and numerical study of premixed propane/air combustion in the micro-planar combustor with a cross-plate insert
Aikun Tang et al.
APPLIED THERMAL ENGINEERING (2018)
Non-premixed lean flame characteristics depending on air hole positions in a baffled micro combustor
Won Hyun Kim et al.
APPLIED THERMAL ENGINEERING (2018)
Effect of wall thermal conductivity on the stability of catalytic heat-recirculating micro-combustors
Junjie Chen et al.
APPLIED THERMAL ENGINEERING (2018)
Investigation on the effects of front-cavity on flame location and thermal performance of a cylindrical micro combustor
Qingguo Peng et al.
APPLIED THERMAL ENGINEERING (2018)
Investigation on the combustion performance enhancement of the premixed methane/air in a two-step micro combustor
Jiaqiang E et al.
APPLIED THERMAL ENGINEERING (2018)
Computational fluid dynamics modeling of the combustion and emissions characteristics in high-temperature catalytic micro-combustors
Junjie Chen et al.
APPLIED THERMAL ENGINEERING (2018)
Micro combustion in a porous media for thermophotovoltaic power generation
Stephen Bani et al.
APPLIED THERMAL ENGINEERING (2018)
Effect of oxygen enrichment on combustion efficiency of lean H-2/N-2/O-2 flames in a micro cavity-combustor
Wei Yang et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2018)
Enhancement of hydrogen combustion efficiency by helium dilution in a micro-combustor with wall cavities
Aiwu Fan et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2018)
Micro-combustor performance enhancement using a novel combined baffle-bluff configuration
Mehran Ansari et al.
CHEMICAL ENGINEERING SCIENCE (2018)
Effects analysis on combustion and thermal performance enhancement of a nozzle-inlet micro tube fueled by the premixed hydrogen/air
Qingguo Peng et al.
ENERGY (2018)
Numerical investigation of key parameters of the porous media combustion based Micro-Thermophotovoltaic system
Stephen Bani et al.
ENERGY (2018)
Investigation on the effects of wall thickness and porous media on the thermal performance of a non-premixed hydrogen fueled cylindrical micro combustor
Qingguo Peng et al.
ENERGY CONVERSION AND MANAGEMENT (2018)
Numerical investigations on an improved counterflow double-channel micro combustor fueled with hydrogen for enhancing thermal performance
Wei Zuo et al.
ENERGY CONVERSION AND MANAGEMENT (2018)
Combustion characteristics of premixed hydrogen/air flames in a geometrically modified micro combustor
Ilker Yilmaz et al.
FUEL (2018)
A study on the dynamic behavior of premixed propane-air flames propagating in a curved combustion chamber
Huahua Xiao et al.
FUEL (2018)
The impact of biofuel properties on emissions and performances of a micro gas turbine using combustion vibrations detection
C. Allouis et al.
FUEL PROCESSING TECHNOLOGY (2018)
Numerical investigation on combustion characteristics of methane/air in a micro-combustor with a regular triangular pyramid bluff body
Yunfei Yan et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)
Power generation performance of hydrogen-fueled micro thermophotovoltaic reactor
Yueh-Heng Li et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)
Numerical investigation on mixing performance and diffusion combustion characteristics of H2 and air in planar micro-combustor
Linhong Li et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)
Effect of backward facing step on radiation efficiency in a micro combustor
Hosein Faramarzpour et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2018)
Compressor and Turbine Multidisciplinary Design for Highly Efficient Micro-gas Turbine
Dario Barsi et al.
JOURNAL OF THERMAL SCIENCE (2018)
A review of cavity-based trapped vortex, ultra-compact, high-g, inter-turbine combustors
Dan Zhao et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2018)
High-efficiency thermophotovoltaic energy conversion enabled by a metamaterial selective emitter
David N. Woolf et al.
OPTICA (2018)
The effect of embedded high thermal conductivity material on combustion performance of catalytic micro combustor
Yi Zhang et al.
ENERGY CONVERSION AND MANAGEMENT (2018)
Numerical study on energy conversion performance of micro-thermophotovoltaic system adopting a heat recirculation micro-combustor
Aikun Tang et al.
FUEL PROCESSING TECHNOLOGY (2018)
Prediction of flame speed and exergy analysis of premixed flame in a heat recirculating cylindrical micro combustor
Uttam Rana et al.
ENERGY (2017)
Numerical investigations on combustion characteristics of H2/air premixed combustion in a micro elliptical tube combustor
Wei Zuo et al.
ENERGY (2017)
Numerical investigations on a comparison between counterflow and coflow double-channel micro combustors for micro-thermophotovoltaic system
Wei Zuo et al.
ENERGY (2017)
Ultra-low calorific gas combustion in a gradually-varied porous burner with annular heat recirculation
Fuqiang Song et al.
ENERGY (2017)
Experimental investigation on overall performance of a millimeter-scale radial turbine for micro gas turbine
Lei Fu et al.
ENERGY (2017)
Experimental investigation on combustion characteristics of premixed propane/air in a micro-planar heat recirculation combustor
Aikun Tang et al.
ENERGY CONVERSION AND MANAGEMENT (2017)
Optimal combustor dimensions for the catalytic combustion of methane-air mixtures in micro-channels
Junjie Chen et al.
ENERGY CONVERSION AND MANAGEMENT (2017)
Management of the gas-phase and surface chemistry in methane-fueled catalytic micro-combustors
Junjie Chen et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Effect of micro-pin-fin arrays on the heat transfer and combustion characteristics in the micro-combustor
Jianfeng Pan et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Effect of gas-phase reaction on catalytic reaction for H2/O2 mixture in micro combustor
Yi Zhang et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
A miniaturized power generation system cascade utilizing thermal energy of a micro-combustor: Design and modelling
Long Meng et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Effect of the cavity depth on the combustion efficiency of lean H2/air flames in a micro combustor with dual cavities
Wei Yang et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Development of a powerful miniature power system with a meso-scale vortex combustor
Daisuke Shimokuri et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2017)
Investigations on the temperature distribution of the diesel particulate filter in the thermal regeneration process and its field synergy analysis
Yuanwang Deng et al.
APPLIED THERMAL ENGINEERING (2017)
A heat-recirculating combustor with multiple injectors for thermophotovoltaic power conversion
Tae Young Kim et al.
APPLIED ENERGY (2017)
Experimental study on premixed methane-air catalytic combustion in rectangular micro channel
Jianfeng Pan et al.
APPLIED THERMAL ENGINEERING (2017)
Flame stability and heat transfer analysis of methane-air mixtures in catalytic micro-combustors
Junjie Chen et al.
APPLIED THERMAL ENGINEERING (2017)
Effect of heat recirculation on the combustion stability of methane-air mixtures in catalytic micro-combustors
Junjie Chen et al.
APPLIED THERMAL ENGINEERING (2017)
Numerical investigations on thermal performance of a micro-cylindrical combustor with gradually reduced wall thickness
Wei Zuo et al.
APPLIED THERMAL ENGINEERING (2017)
Combustion characteristics of non-premixed methane micro-jet flame in coflow air and thermal interaction between flame and micro tube
Xing Li et al.
APPLIED THERMAL ENGINEERING (2017)
Numerical investigation on the combustion characteristics of non-premixed hydrogen-air in a novel micro-combustor
E. Jiaqiang et al.
APPLIED THERMAL ENGINEERING (2017)
Numerical investigations on an improved micro-cylindrical combustor with rectangular rib for enhancing heat transfer
Wei Zuo et al.
APPLIED ENERGY (2016)
Field synergy analysis for enhancing heat transfer capability of a novel narrow-tube closed oscillating heat pipe
Jiaqiang E et al.
APPLIED ENERGY (2016)
Study of a thermoelectric generator based on a catalytic premixed meso-scale combustor
L. Merotto et al.
APPLIED ENERGY (2016)
Effects of heat recirculation on combustion characteristics of n-heptane in micro combustors
Junwei Li et al.
APPLIED THERMAL ENGINEERING (2016)
Combustion and direct energy conversion inside a micro-combustor
Yafeng Lei et al.
APPLIED THERMAL ENGINEERING (2016)
Effect of inlet temperature on combustion efficiency of lean H2/air mixtures in a micro-combustor with wall cavities
Wei Yang et al.
APPLIED THERMAL ENGINEERING (2016)
Orthogonal Experimental Design and Fuzzy Grey Relational Analysis for emitter efficiency of the micro-cylindrical combustor with a step
Wei Zuo et al.
APPLIED THERMAL ENGINEERING (2016)
Hetero-/homogeneous combustion and flame stability of fuel-lean propane-air mixtures over platinum in catalytic micro-combustors
Junjie Chen et al.
APPLIED THERMAL ENGINEERING (2016)
Fundamental flame characteristics of premixed H-2-air combustion in a planar porous micro-combustor
Jun Li et al.
CHEMICAL ENGINEERING JOURNAL (2016)
Impact of the bluff-body material on the flame leading edge structure and flame-flow interaction of premixed CH4/air flames
Dan Michaels et al.
COMBUSTION AND FLAME (2016)
Numerical study on heat recirculation in a porous micro-combustor
Jun Li et al.
COMBUSTION AND FLAME (2016)
Global stability analysis of 3D micro-combustion model
Michele A. Bucci et al.
COMBUSTION AND FLAME (2016)
Effect of operation strategies on the economic and environmental performance of a micro gas turbine trigeneration system in a tropical region
Firdaus Basrawi et al.
ENERGY (2016)
Numerical simulation of catalysis combustion inside micro free-piston engine
Qian Wang et al.
ENERGY CONVERSION AND MANAGEMENT (2016)
Numerical study of effect of wall parameters on catalytic combustion characteristics of CH4/air in a heat recirculation micro-combustor
Yunfei Yan et al.
ENERGY CONVERSION AND MANAGEMENT (2016)
Numerical study on a multiple-channel micro combustor for a micro-thermophotovoltaic system
Yang Su et al.
ENERGY CONVERSION AND MANAGEMENT (2016)
Numerical investigation on hydrogen/air non-premixed combustion in a three-dimensional micro combustor
Jiaqiang E et al.
ENERGY CONVERSION AND MANAGEMENT (2016)
Experimental and numerical investigations on flame stability of methane/air mixtures in mesoscale combustors filled with fibrous porous media
Yi Liu et al.
ENERGY CONVERSION AND MANAGEMENT (2016)
Experimental study on standing wave regimes of premixed H2-air combustion in planar micro-combustors partially filled with porous medium
Jun Li et al.
FUEL (2016)
Numerical simulations of anode two-phase flow in Micro-DMFC using the volume of fluid method
D. S. Falcao et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
Hetero-/homogeneous combustion of premixed hydrogen-oxygen mixture in a micro-reactor with catalyst segmentation
Qingbo Lu et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
A hybrid micro gas turbine and solid state fuel cell power plant with hydrogen production and CO2 capture
Seyed Navid Roohani Isfahani et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
Micro-scale energy harvesting devices: Review of methodological performances in the last decade
Krishna Veni Selvan et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)
Flow Field Predictions of Bluff Body Introduced Micro combustor
C. G. Sarath et al.
INTERNATIONAL CONFERENCE ON EMERGING TRENDS IN ENGINEERING, SCIENCE AND TECHNOLOGY (ICETEST - 2015) (2016)
A three-dimensional computational model of H2-air premixed combustion in non-circular micro-channels for a thermo-photovoltaic (TPV) application
Saad Akhtar et al.
APPLIED ENERGY (2015)
Effects of H2/CO blend ratio on radiated power of micro combustor/emitter
Dongyue Jiang et al.
APPLIED THERMAL ENGINEERING (2015)
Effect of external surface emissivity on flame-splitting limit in a micro cavity-combustor
Wei Yang et al.
APPLIED THERMAL ENGINEERING (2015)
Flame-anchoring mechanisms of a micro cavity-combustor for premixed H2/air flame
Jianlong Wan et al.
CHEMICAL ENGINEERING JOURNAL (2015)
Combustion characteristics and performance evaluation of premixed methane/air with hydrogen addition in a micro-planar combustor
Aikun Tang et al.
CHEMICAL ENGINEERING SCIENCE (2015)
Dynamics of bluff-body-stabilized premixed hydrogen/air flames in a narrow channel
Bok Jik Lee et al.
COMBUSTION AND FLAME (2015)
Power density optimization for micro thermoelectric generators
Marc T. Dunham et al.
ENERGY (2015)
Development of a high-temperature and high-uniformity micro planar combustor for thermophotovoltaics application
Dongyue Jiang et al.
ENERGY CONVERSION AND MANAGEMENT (2015)
Numerical investigation on the combustion characteristics of methane/air in a micro-combustor with a hollow hemispherical bluff body
Li Zhang et al.
ENERGY CONVERSION AND MANAGEMENT (2015)
Numerical investigations on characteristics of methane catalytic combustion in micro-channels with a concave or convex wall cavity
Jingyu Ran et al.
ENERGY CONVERSION AND MANAGEMENT (2015)
Numerical investigation of a novel micro combustor with double-cavity for micro-thermophotovoltaic system
Yang Su et al.
ENERGY CONVERSION AND MANAGEMENT (2015)
Effect of thermal conductivity of solid wall on combustion efficiency of a micro-combustor with cavities
Jianlong Wan et al.
ENERGY CONVERSION AND MANAGEMENT (2015)
Experimental studies on a micro power generator using thermo-electric modules mounted on a micro-combustor
Shambhoo Yadav et al.
ENERGY CONVERSION AND MANAGEMENT (2015)
A non-monotonic variation of blow-off limit of premixed CH4/air flames in mesoscale cavity-combustors with different thermal conductivities
Jianlong Wan et al.
FUEL (2015)
Mitigation of premixed flame-sustained thermoacoustic oscillations using an electrical heater
Dan Zhao et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)
Parametric analysis and Pareto optimization of an integrated autothermal biomass gasification, solid oxide fuel cell and micro gas turbine CHP system
Mehdi Borji et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)
Numerical study of premixed hydrogen/air combustion in a micro planar combustor with parallel separating plates
Aikun Tang et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)
Development and performance analysis of a metallic passive micro-direct methanol fuel cell for portable applications
D. S. Falcao et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)
Field synergy principle analysis for reducing natural convection heat loss of a solar cavity receiver
Yuqiang Li et al.
RENEWABLE ENERGY (2015)
A prototype micro-thermoelectric power generator for micro-electromechanical systems
Shambhoo Yadav et al.
APPLIED PHYSICS LETTERS (2014)
Effect of bluff body shape on the blow-off limit of hydrogen/air flame in a planar micro-combustor
Aiwu Fan et al.
APPLIED THERMAL ENGINEERING (2014)
Effects of bluff body shape on the flame stability in premixed micro-combustion of hydrogen air mixture
Ghobad Bagheri et al.
APPLIED THERMAL ENGINEERING (2014)
Power and hydrogen production from ammonia in a micro-thermophotovoltaic device integrated with a micro-reformer
Dong Hyun Um et al.
ENERGY (2014)
A numerical investigation on combustion characteristics of H2/air mixture in a microcombustor with wall cavities
Jianlong Wan et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)
Experimental and numerical investigations of hydrogen-air premixed combustion in a converging-diverging micro tube
Weijuan Yang et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)
The impact of channel gap distance on flame splitting limit of H2/air mixture in microchannels with wall cavities
Jianlong Wan et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)
Numerical simulation of the effect of hydrogen addition fraction on catalytic micro-combustion characteristics of methane-air
Yunfei Yan et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)
Thermal performance of micro-combustors with baffles for thermophotovoltaic system
Dongyue Jiang et al.
APPLIED THERMAL ENGINEERING (2013)
Experimental studies on flame stabilization in a three step rearward facing configuration based micro channel combustor
Bhupendra Khandelwal et al.
APPLIED THERMAL ENGINEERING (2013)
Numerical study of the effects of wire insertion on CH4(methane)/AIR pre-mixed flame in a micro combustor
Mohammadreza Baigmohammadi et al.
ENERGY (2013)
Thermal performance of a micro combustor with heat recirculation
Upendra W. Taywade et al.
FUEL PROCESSING TECHNOLOGY (2013)
Interactions between heat transfer, flow field and flame stabilization in a micro-combustor with a bluff body
Aiwu Fan et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2013)
The effect of the blockage ratio on the blow-off limit of a hydrogen/air flame in a planar micro-combustor with a bluff body
Aiwu Fan et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2013)
Performance of a micro-thermophotovoltaic power system using an ammonia-hydrogen blend-fueled micro-emitter
S. I. Lee et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2013)
Optimized thermal coupling of micro thermoelectric generators for improved output performance
N. Wojtas et al.
RENEWABLE ENERGY (2013)
Development of a novel cascading TPV and TE power generation system
K. Qiu et al.
APPLIED ENERGY (2012)
Effects of catalyst segmentation with cavities on combustion enhancement of blended fuels in a micro channel
Yueh-Heng Li et al.
COMBUSTION AND FLAME (2012)
Transient growth of flow disturbances in triggering a Rijke tube combustion instability
Dan Zhao
COMBUSTION AND FLAME (2012)
Effects of preferential transport in turbulent bluff-body-stabilized lean premixed CH4/air flames
Robert S. Barlow et al.
COMBUSTION AND FLAME (2012)
Numerical study of the effects of heat transfer methods on CH4/(CH4 + H2)-AIR pre-mixed flames in a micro-stepped tube
Jalal Zarvandi et al.
ENERGY (2012)
Thermophotovoltaic power conversion from a heat-recirculating micro-emitter
J. H. Park et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2012)
Experimental and numerical investigation on combustion characteristics of premixed hydrogen/air flame in a micro-combustor with a bluff body
Jianlong Wan et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)
Experimental study on micro modular combustor for micro-thermophotovoltaic system application
W. M. Yang et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)
Explicit analytical solutions for fluid flow and temperature field synergy in cylindrical coordinates
Yuanyuan Li et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2012)
A review on microcombustion: Fundamentals, devices and applications
Niket S. Kaisare et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2012)
Power enhancement of micro thermoelectric generators by microfluidic heat transfer packaging
N. Wojtas et al.
SENSORS AND ACTUATORS A-PHYSICAL (2012)
A review of progress in heat recirculating meso-scale combustors
V. Shirsat et al.
APPLIED ENERGY (2011)
Development of micro power generators - A review
S. K. Chou et al.
APPLIED ENERGY (2011)
Research on modular micro combustor-radiator with and without porous media
W. M. Yang et al.
CHEMICAL ENGINEERING JOURNAL (2011)
Effects of Dilution on Laminar Burning Velocity of Premixed Methane/Air Flames
B. Galmiche et al.
ENERGY & FUELS (2011)
Experimental study of a plat-flame micro combustor burning DME for thermoelectric power generation
L. Q. Jiang et al.
ENERGY CONVERSION AND MANAGEMENT (2011)
Portable Thermoelectric Power Generator Based on a Microfabricated Silicon Combustor with Low Resistance to Flow
Christopher H. Marton et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2011)
Micro and mesoscale combustion
Kaoru Maruta
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2011)
Microscale combustion: Technology development and fundamental research
Yiguang Ju et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2011)
Effect of geometry on the thermal behavior of catalytic micro-combustors
Almerinda Di Benedetto et al.
CATALYSIS TODAY (2010)
Experimental investigation of porous media combustion in a planar micro-combustor
J. Li et al.
FUEL (2010)
A potential heat source for the micro-thermophotovoltaic (TPV) system
J. Li et al.
CHEMICAL ENGINEERING SCIENCE (2009)
Optimization principles for convective heat transfer
Qun Chen et al.
ENERGY (2009)
Combustion of hydrogen-air in catalytic micro-combustors made of different material
Junhu Zhou et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2009)
Intermediate Reynolds number flat plate boundary layer flows over catalytic surfaces for micro-combustion applications
Suzanne A. Smyth et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2009)
Stability and performance of catalytic microreactors: Simulations of propane catalytic combustion on Pt
Niket S. Kaisare et al.
CHEMICAL ENGINEERING SCIENCE (2008)
Studies on a heat-recirculating microemitter for a micro thermophotovoltaic system
K. H. Lee et al.
COMBUSTION AND FLAME (2008)
Design and fabrication of MEMS thermoelectric generators with high temperature efficiency
Till Huesgen et al.
SENSORS AND ACTUATORS A-PHYSICAL (2008)
Powering MEMS portable devices - a review of non-regenerative and regenerative power supply systems with special emphasis on piezoelectric energy harvesting systems
K. A. Cook-Chennault et al.
SMART MATERIALS AND STRUCTURES (2008)
Effects of major parameters on micro-combustion for thermophotovoltaic energy conversion
J. F. Pan et al.
APPLIED THERMAL ENGINEERING (2007)
Numerical modeling of non-adiabatic heat-recirculating combustors
C. H. Kuo et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2007)
Stability limits of cavity-stabilized flames in supersonic flow
CC Rasmussen et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2005)
Effects of step height on wall temperature of a microcombustor
ZW Li et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2005)
Numerical study on supersonic combustion with cavity-based fuel injection
KM Kim et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2004)
Development of microthermophotovoltaic system
WM Yang et al.
APPLIED PHYSICS LETTERS (2002)
Combustion in micro-cylindrical combustors with and without a backward facing step
WM Yang et al.
APPLIED THERMAL ENGINEERING (2002)
On thermoelectric power conversion from heat recirculating combustion systems
FJ Weinberg et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2002)
Gas turbine heat transfer: past and future challenges
R Schiele et al.
JOURNAL OF PROPULSION AND POWER (2000)
分享论文
